Phylink PLC-223W Manual de usuario
VERSION 1.2
This installation guide provides basic instructions for installing the PLC-223W/
PLC-233W on your network and then configure Android, iOS App and PC software to
view the camera.
Contents
1. Verify the package contents
Verify the package contents against the list below.
PLC-223W/PLC-233W Network Camera
Camera Stand
Manual and Software on CD-ROM
CAT5 Ethernet Cable
Power Adapter
Quick Install Guide
1. Verify the package contents ................................................................ 2
2. Hardware Overview .................................................................................3
3. Hardware Installation ............................................................................. 4
4. Quick installation for iOS device ........................................................ 5
5. Quick installation for Android device ..............................................11
6. Camera installation on PC ...................................................................16
7. Installation via Web Browser ............................................................. 23
PHYLINK Cube HD Quick Install Guide
Phylink’s website contains the latest user documentation and software updates for
Phylink’s products. Please visit www.phylink.com for more details.
For more information about how to use the camera, please see the User Manual on the
CD included with this package.
2. Hardware Overview
7
8
910
6
5
1
2
3
2. WPS status indicator LED
3. WPS Button
4. Reset pin hole
5. Audio Out
6. Power Jack
7. Light Sensor
8. Infrared LED
9. Microphone
10. Power/Status indicator LED
11. Micro SD Card slot
Short press this button to reset the camera back to Factory Settings.
Reset pin hole
4
1. Ethernet RJ45 connector
11
After the camera is powered on, system is going to start, the indicator LED shows
yellow light and quickly off which means the system is being started.
When the indicator LED shows yellow again, it means the system has started
successfully.
Red light is for wired connection, yellow light for wireless connection.
The indicator LED flashes during data transfer.
Power/Status indicator LED
Connects to the included DC 12V
power adapter.
Power Jack
Monitors lighting conditions and switches
between color and infrared accordingly.
Light sensor
Local storage for storing recorded image
and video.
Micro SD Card slot
Press this button to setup a wireless
connection automatically.
WPS Button
12
12. Screw of Stand
PHYLINK Cube HD Quick Install Guide
3. Hardware Installation
Connect the camera to your switch or router using the provided network cable.
Connect the AC adapter cable from the camera to a power outlet.
Note: DHCP sever and UDP port must be enabled on your router (which is default
setting on most router) to assign an IP address to the network camera. If needed,
please refer to your router's user manual on how to enable DHCP server and UDP.
IMPORTANT! - The PHYLINK Cube HD is not approved for outdoor use - the
product may only be installed in indoor environments.
Mount the camera
The supplied stand provides flexible installation solutions.
It makes the camera either wall-mounted or ceiling-mounted or placed on a desk.
Connect network cable and power
For some angles you may need to loosen main mounting ring by turning the
big flat screw on the back of the stand with a coin, so that the notch in the mounting
ring allows the pin to point in the desired direction. You can then tighten it again
with the coin.
Should any mounting position require the image to be rotated 180 degrees (inverted),
there is a setting for that in the "camera setup" menu.
PHYLINK Cube HD Quick Install Guide
4. Quick installation for iOS device
4.1 Camera installation on iOS device
There are three ways to add a camera on an iOS device.
Start the App and then the " " screen will appear.Add Camera
Option 1
Automatically search in Local Area Network
Event Playback Add Camera Info
Camera
Add Camera
iPad 17:50 63%
Camera Found! (2)
Camera Found! (2)
Add QRCode
VNW5V15K6RY7J4VWC7W1
192.168.168.102
THG5T55K2RY7K1VWC7XJ
192.168.168.103
Add Camera
iPad 17:50 63%
Cancel
Name
THG5T55K2RY7K1VWC7XJ
Save
Camera
UID
Account admin
PasswordPassword
Enter the "Password". ( The default password is "admin". )
Assign a "Name" to the camera to help identify this camera if more than one camera
is in use. ( The default name is "Camera". )
Press " " button and your camera will show up under “ ”.Save Camera List
If your camera is in the same Local Area Network with your smartphone, the App can
search the cameras automatically. If the camera UID shows up on list then press the
UID for the camera you are setting up.
PHYLINK Cube HD Quick Install Guide
Search "PHYCAM" App from App Store, download and install it.
Press " " button to scan the camera UID from the sticker on the product.QRCode
Scan the camera UID using smart phone
Manually type UID
If your camera is not in the same Local Area Network with your smartphone,
the App can NOT search cameras for Local Network.
Press " " button and manually type "UID" according to the UID sticker on theAdd
product.
Event Playback Add Camera Info
Camera
Add Camera
iPad 17:50 63%
Camera Found! (2)
Camera Found! (2)
Add QRCode
VNW5V15K6RY7J4VWC7W1
192.168.168.102
THG5T55K2RY7K1VWC7XJ
192.168.168.103
iPad 17:50 63%
Place a barcode inside the
viewfinder rectangle to scan it.
Cancel Light
Enter the "Password". ( The default password is "admin". )
Assign a "Name" to the camera to help identify this camera if more than one camera
is in use. ( The default name is "Camera". )
Press " " button and your camera will show up under “ ”.Save Camera List
Enter the "Password". ( The default password is "admin". )
Assign a "Name" to the camera to help identify this camera if more than one camera
is in use. ( The default name is "Camera". )
Press " " button and your camera will show up under “ ”.Save Camera List
Option 2
Option 3
PHYLINK Cube HD Quick Install Guide
Press on the Camera name from “ ” for "Live View" with a wired connection.Camera List
Press the " " button to go back to the “ ”.Back Camera List
Press to View saved pictures.
Press to take a snapshot.
Press to start listening or stop listening.
Live View
iPad 17:50 63%
Back
Camera
Online / LAN
768x432 / FPS: 16 / BPS: 154 Kbps
Press to start speaking or stop speaking.
PHYLINK Cube HD Quick Install Guide
4.2 Wireless Setup on on iOS device
Event Playback Add Camera Info
Camera
Camera List
iPad 17:50 63%
VNW5V15K6RY7J4VWC7W1
Edit
Connected
Camera
V5G5SX5U2TE71JBWC7W1
Connected
Camera
Go to > .Advanced Setting Network Setup
Edit Camera
iPad 17:50 63%
Back
Name Camera
Account admin
Password
Reconnect Connected
Security Code
Advanced Setting
Advanced Setting
iPad 17:50 63%
Back
Motion Detection
Video Quality
Alarm Recording
Microphone
Speaker Not available
Network Setup
Alarm Actions
Login Account
PHYLINK Cube HD Quick Install Guide
There are two ways to setup the wireless connection.
Option 1
Quick setup with Smartphone
Press on from the and go to the .Camera List Edit Camera
Network Setup
iPad 17:52 62%
Back
WiFi Networks
Data & Time
WiFi Networks
iPad 17:52 62%
Back
CHOOSE A NETWORK...
D-Link_DIR-612
TP-Link_245416
FAST_11DA2E
phr-002
Enter Password
iPad 17:52 62%
Cancel Join
Password
After a successful wireless setup, you can remove the network cable and the camera
should work through the wireless network after a short delay.
PHYLINK Cube HD Quick Install Guide
Press , then the App will search for available wireless networks,WiFi Networks
select your network among this list.
Type your Wi-Fi password and press the ” button to complete the Wi-Fi setup.“Join
Option 2
You may create a WiFi connect using the WPS Button on the back of the camera.
The camera will automatically create a wireless connection to your router.
While connecting, the will always on and your camera will reboot.WPS status LED
Step 2
Press the on your router within 60 seconds.WPS button
Step 1
After the camera is powered on, press the on the back of the camera.WPS button
The blue above the WPS button will blink.WPS status LED
Quick setup with WPS function
PHYLINK Cube HD Quick Install Guide
Note: WPS also called QSS (Quick Secure Setup) on some brands of router.
On some routers, you may need to login to the web interface and then click
on an onscreen button to activate the WPS feature. If you are not sure where the
WPS button is on your router, please refer to your router’s User Manual.
For more advanced settings, (such as motion detection, schedule,Email alarm,
DDNS, FTP, NAS, SD card recording and more) please see the User Manual
which is available on the installation CD or the PHYLINK support website.
Otros manuales para PLC-223W
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara IP de Phylink
Phylink
Phylink PLC-325PW Bullet HD Manual de usuario
Phylink
Phylink PLC-213W Manual de usuario
Phylink
Phylink PLC-325PW Bullet HD Manual de usuario
Phylink
Phylink PLC-325PW Bullet HD Manual de usuario
Phylink
Phylink PLC-223W Manual de usuario
Phylink
Phylink PLC-128PW Manual de usuario
Phylink
Phylink Bullet Pro PLC-336PW Manual de usuario
Phylink
Phylink Bullet HD Manual de usuario
