Phoenix PWC-2950 Manual de usuario
Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
1 / 22
Installation and Operation Manual
Tire Changer
PWC – 2950/PWC – 2950A
ATTENTION - Please read the instruction before using this product. Failure
to follow the instructions may result in serious injury. Keep the instruction
for reference by operators.
Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
2 / 22
Table of Contents
1. Safety Instructions …………..................................................3
a. Owner’s Responsibility
b. Intended Use
c. Precaution
d. General Safety Rule
e. Technical Terms
2. Product Specification ..............................................................6
a. Equipment Specification
b. Equipment Presetting and Special Requirements
c. Problem due to misoperation and means of settlement
3. Product Installation …………..................................................6
a. Unpacking
b. Parts Included
c. Positing and Assembly
i. For PWC - 2950 and PWC – 2950A Main Body Assembly
ii. For PWC -2950A Assist arm Assembly
4. Operating Test ........................................................................15
a. Test the Rotation Direction of the Motor
b. Operating Test
5. Operation ................................................................................15
a. Breaking the Bead
b. Removing the Tire
c. Mounting the Tire
6. Inflation ...................................................................................19
7. Maintenance ............................................................................20
8. Moving …….............................................................................21
9. Storage .....................................................................................21
10. Trouble Shooting ...................................................................22
Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
3 / 22
1. Safety Instructions
a. Owner’s Responsibility
In order to maintain your product properly and to ensure operator
safety, it is the responsibility of the owner to read and follow these
instructions:
All operators should be properly trained.
All operators should not wear loose clothing or jewelry. These
things may become entangled with the wheel or turntable
while using the changer and could cause serious injury.
All operators should wear protective eye gear. Safety glasses
with side shields, goggles, or face shields are acceptable
All operators recommend wear sturdy leather work shoes with
steel toes and oil resistant soles, to prevent injury in typical
shop activities.
Safety guard should be used to avoid injury.
The tire changer contains electronics and should be kept
indoors and in a dry environment. Exposure to water can cause
damage and is not covered under any warranty.
Exposure to extreme heat can damage internal parts of the tire
changer.
Do not use the tire changer beyond its measurement or weight
range. Using the tire changer beyond its measurement or
weight range could cause damage to the tire changer and does
not ensure a precise function of the tire changer.
Other safety regulations may be in place according to OSHA or
your local city and county. These should all be followed in
addition to the instructions in this manual.
Keep all instructions permanently with the unit and all labels
and notices are clean and visible
Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
4 / 22
b. Intended Use
The semi-automatic tire changer has been designed and
manufactured exclusively for removing and mounting tires
from/onto rims and inflating the tires. With the unique help
device, it could handle tires with hard and stiff tire wall.
Max. Tire Dia. 43”
Max. Tire Width. 15”
In particular the manufacturer cannot be held responsible for
any damage caused through the use of this tire changer for
purposes other than those specified in this manual, and
therefore inappropriate, incorrect and unreasonable.
c. Precaution
Any tampering or modification to the equipment carried out
without the manufacturer’s prior authorization will free
Manufacturer from all responsibility for damage caused directly
or indirectly by the above actions.
d. General Safety Rule
When placing the tire changer, be sure that to complies with
current safety code at work regulations.
The tire changer must be connected to the main electric power
supply and the compressed air system. Please install the
machine near the power sources.
Must provide at least the space shown in (Fig.1) to allow all
parts of the machine to operate correctly and without any
restriction.
If the machine is installed outside it must be protected.
The tire changer comes with electric motor, so it cannot be
used in explosive atmospheres.
Phoenix Auto Equipment
-Address:
2711 East Craig Road Ste
- Website:
https://www.phoenixautoequipment.com
- Phone: 7025802883
e.
Technical Terms
Before the installation and operation, you have to understand
the t
echnical terms of the machine.
1.
Inflating control pedal
2.
Clamp control pedal
3.
Bead breaker control pedal
4.
Reverser control pedal
5. Whee
l support
6.
Bead breaker
7.
Oil segregator
8. Turntable
9. Clamps
10.
Mounting tool/head
11.
Locking lever
12.
Pressure gauge
13. deflati
ng button
14.
Vertical arm
2711 East Craig Road Ste
#E, North Las Vegas, NV, 89030 Unite
d States
https://www.phoenixautoequipment.com
(Fig.1)
Technical Terms
Before the installation and operation, you have to understand
echnical terms of the machine.
(Fig.2)
Inflating control pedal
Clamp control pedal
Bead breaker control pedal
Reverser control pedal
l support
Bead breaker
Oil segregator
Mounting tool/head
Locking lever
/handle
Pressure gauge
ng button
Vertical arm
d States
5 / 22
Before the installation and operation, you have to understand
Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
6 / 22
2. Product Specification
a. Equipment Specification
Rim clamping inside 13"-26"
Rim clamping outside 15"-28"
Maximum Tire Diameter 43"
Maximum wheel Width 15"
Includes bead blast air blast
Includes assist arm
ALU front foot pedal valve ,ALU air distributor valve last longer
than the regular plastic valve
ALU canister of the bead breaker cylinder avoid getting rusty
and more powerful for braking the bead
Blast Inflation
Bead Break force 5700 lbs.
Operating pressure 120 psi
Voltage 110v, 1.5HP motor
Includes 4 clamp protect covers
Plastic mount/demount Head
b. Equipment Presetting and Special Requirements
Air pressure presetting: The machine could run normally when
the air pressure is 8-10bar. The air pressure should not less
than 8 bars.
Mounting tool presetting: The mounting tool is already
calibrated according to a standard 13” rim. For a bigger or
smaller rim, you have to lose bolts fixing on the mounting tool
and at the bottom of the hexagonal bar. Adjust the mounting
tool to a suitable position.
Oil mass presetting: The oil mass in the oil segregator is already
well prepared before it leaves the factory. If the fluid rate is too
Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
7 / 22
fast or too slow, adjust the needle valve by using a screwdriver.
Check that a drop of oil is injected into the reservoir every 5-6
times the pedal is pressed down.
c. Problems due to Misoperation and Means of Settlement
Make sure that the machine is well grounded to avoid electric
leakage.
To prevent industrial accidents, do not place your legs between
the bead breaker and the wheel supporter. When the bead
breaker pedal is operated the bead breaker arm moves quickly
and powerfully. Anything within its range of action can be in
danger of being crushed.
Bead breaking with the clamps in open position can be
extremely dangerous for operator's hands.
ALWAYS keep hands and body back from inflating tire
To prevent industrial accidents, keep hands and other parts of
the body as far as possible from the tool arm when the table
top is turning.
Do not place your hands on the wheel: when moving the arm to
its working position your hand could be crushed between the
rim and the mounting head.
During bead breaking operations NEVER touch the side of the
tire.
3. Product Installation
a. Unpacking
Un-package and remove all plastic wrapping from tire changer.
After removing the package be sure that the equipment is
complete and intact, checking that no visible damage is present.
Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
8 / 22
Do not leave packaging parts (plastic bags, foamed polystyrene,
nails, screws, wooden parts etc) within the reach of children as
they may be dangerous.
Note: When unpacking the machine, wear a proper glove
.
b. Parts Included
For PWC - 2950 and PWC - 2950A
Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
9 / 22
For PWC - 2950A ONLY
Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
10 / 22
For PWC - 2950A ONLY
In addition to these parts, the main body of the machine is included.
With some preinstalled parts and internal air lines preinstalled.
c. Positing and Assembly
i. For PWC - 2950 and PWC – 2950A Main Body Assembly
Remove the 4 bolts shown (Fig. 3)
With the help of 2 people, lift and place the
large vertical main column on top of the
changer, align with the bolt holes, place and
tighten the four bolts. (Fig. 4)
Place hexagon mounting bar through hole in
horizontal swivel bar. Then place the large
spring over the hexagon bar. Next with the
help of another person, push spring down
while placing plastic cap on top of hexagon
(Fig. 3)
(Fig. 4)
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
