Phoenix Mecano OKIN Refined RF3409 Manual de usuario

Issue Department：Date：2018.11.15

System Instruction Author：

Instruction of RF3409 Edition：1.1

Page 1 of 4

1/4

Instruction of RF3409

1Key description

1.1 appearance



Figure1buttonofremote

FCC ID: PCU-RF3409

IC：21319-RF3409

FCC ID：PCU-CB1220

IC: 21319-CB1220

2 3

Issue Department：Date：2018.11.15

System Instruction Author：

Instruction of RF3409 Edition：1.1

Page 2 of 4

2/4

2.Key description

2.1 ZG button

Click the ZG button, the actuator moves to ZG position, stop when click any button during the

movement;

Press and hold the ZG button for 5s, timer LED of remote flashes, the control box records

current position as ZG position;

When in the process of movingto memory positions, the head and foot actuatorsmove first,

then the tilt and lumbar actuators move;

2.2 AntiSnore button

Click AntiSnore button, actuators move to AntiSnore position, stop when click any button

during movement；

Press and hold AntiSnore button for 5s, timer LED of remote flashes, the control box records

current position as AntiSnore position;

When in the process of moving to memory positions, the head and foot actuators move first,

then the tilt and lumbar actuators move;

2.3 Memory A button

Click MA button, actuators move to MA position, stop when click any button during

movement；

Press and hold MAbutton for 5s, timer LED of remote flashes, the control box records current

position as MA position;

When in the process of moving to memory positions, the head and foot actuators move first,

then the tilt and lumbar actuators move;

2.4 Reset all memory positions to default settings

Pressa and hold ZG+FLAT buttonsfor 5s, timer LED of remote flashes, the control box reset

all memory positions to default settings；

Issue Department：Date：2018.11.15

System Instruction Author：

Instruction of RF3409 Edition：1.1

Page 3 of 4

3/4

2.5 Head up

Press and hold HEAD UP button of remote, head actuator moves out, stop when

released；

2.6 Head down

Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released；

2.7 Foot up

Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;

2.8 Foot down

Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released；

When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head

andfoot actuators start moving;

2.9 Flat

Click FLAT button, the bed goes flat, stop when click any button during the process of going

flat；

2.10 Under bed light

Click the under bed light button, the under bed light switch its on/off state; After the under bed

light opens, if do not manually close, it will automatically turn off after 5 minutes;

Issue Department：Date：2018.11.15

System Instruction Author：

Instruction of RF3409 Edition：1.1

Page 4 of 4

4/4

any interference received, including interference that may cause undesired operation.

ISED RSS Warning:

This device complies with Innovation,Science and Economic Development Canada

licenceexemptRSS standard(s). Operation is subject to the following two conditions: (1) this

devicemay not cause interference, and (2) this device must accept any interference,

includinginterference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radioexempts de

licence.

L'exploitation est autorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,même si le

brouillage est susceptible d'en compromettre le fonctionnement.

ISED RF exposure statement:

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled

environment.The device has been evaluated to meet general RF exposure requirement.

Le matériel est conforme aux limites de dose d'exposition aux rayonnements énoncés pour fac un

autre environnement.ce dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux rf.

FCC Warning：

Any Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

Tabla de contenidos

Otros manuales de Mando a distancia de Phoenix Mecano

Phoenix Mecano

Phoenix Mecano DewertOkin IPROXX SM Guía del usuario

Phoenix Mecano

Phoenix Mecano Dewert Okin RF-TOUCH Manual de usuario

Phoenix Mecano

Phoenix Mecano Okin Refined JLDK3706 Manual de usuario

Phoenix Mecano

Phoenix Mecano OKIN Refined RF3017A Manual de usuario

Phoenix Mecano

Phoenix Mecano HARTMANN ELECTRONIC PCIE101A Manual de usuario

Phoenix Mecano

Phoenix Mecano OKIN RF ECO BT M Manual de usuario

Phoenix Mecano

Phoenix Mecano OKIN REFINED RF28 Manual de usuario

Phoenix Mecano

Phoenix Mecano Dewert Okin CU165 Manual de usuario

Phoenix Mecano

Phoenix Mecano DewertOkin IPROXX SE Guía del usuario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación