Philips 32PF9531 - 3 Manual de usuario

Do not insert the power plug in a wall socket or hang the TV to the wall before all

connections are made.

• Place or hang the TV wherever you want, but make sure that air can circulate freely through the

ventilation slots.

• Do not install the TV in a confined space such as a book case or a similar unit.

• To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed in

the vicinity.

• Avoid heat, direct sunlight and exposure to rain or water.

• The equipment shall not be exposed to dripping or splashing.

Do not touch, push or rub or strike the screen with anything hard as this may scratch, mar or damage

the screen permanently.

And please do not rub with dust clothes with chemical treatment.

Do not touch the surface with bare hands or greasy cloth (some cosmetics are detrimental to the

screen). Unplug the TV before cleaning the screen.

When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like

chamois soaks. Do not use acetone, toluene and alcohol because they cause chemical damage. Do not

use liquid cleaners or aerosol cleaners.Wipe off saliva or water drops as soon as possible.Their long

time contact with the screen causes deformations and colour fading.

(Only for PDP displays)

A characteristic of Plasma Display Panels is that displaying the same image for a long time can cause a

permanent after-image to remain on the screen.This is called phosphor burn in. Normal use of the TV

should involve the showing of pictures that contain constantly moving and changing images that fill the

screen.

Examples of stationary images (this is not an all-inclusive list, you may encounter others in your

viewing):

•TV and DVD menus: listings of DVD disk content;

•Black bars: when black bars appear at the left and right side of the screen, it is recommended to

change to a picture format so that the picture fills the entire screen;

•TV channel logo: present a problem if they are bright and stationary. Moving or low-contrast graphics

are less likely to cause uneven aging of the screen;

•Stock market stickers: presented at the bottom of the TV screen;

•Shopping channel logos and pricing displays: bright and shown constantly or repeatedly in the same

location on the TV screen.

Examples of still pictures also include logos, computer images, time display, teletext and images

displayed in 4:3 mode, static images or characters, etc.

General

Care of the screen

Safety warnings

Stationary images on the TV screen

2560.2 en 13-03-2006 16:17 Pagina 2

Getting started EN

Before you switch on your TV, connect all your peripheral equipment. See To make video and audio

connections, p. 37.

There is a wide range of audio and video equipment that can be connected to your TV. See To make

audio and video connections, p. 37.

AV1 can handle YPbPr, S-VIDEO, RGB+HB or CVBS and Audio L/R;

AV2 can handle CVBS, S-VIDEO and Audio L/R;

AV3 can handle YPbPr and Digital Audio;

HDMI 1 and 2.

Supported video formats:480i, 480p, 576i, 576p, 720p, 1080i.

Warning:do not insert the mains cord into the mains at the bottom of the TV and in a wall socket

or hang the TV on the wall before all connections are made.

PbL

S-VIDEO

S-VIDEO AUDIO

AV2

AV3

AV1

VIDEO

DIGITAL

AUDIO

VGA(PC)

viaRGB-HV

HDMI 1 HDMI 2 ANTENNA

DIGITALAUDIO OUT

DISPLAYSYNCHRONIZED

ooooo

AUDIO

VIDEO OUT

MONITOR

PbL

S-VIDEO

S-VIDEO AUDIO

AV2

AV3

AV1

VIDEO

DIGITAL

AUDIO

VGA (PC)

via RGB-HV

HDMI 1 HDMI 2 ANTENNA

DIGITAL AUDIO OUT

DISPLAY SYNCHRONIZED

ooooo

AUDIO

VIDEO OUT

MONITOR

Warning:disconnect all power sources before making any connections.

Before you start

Overview of the rear connector panel

2560.2 en 13-03-2006 16:17 Pagina 3

-To connect a camera, camcorder or game, see To make video

and audio connections, p. 37.

-To connect a headphone, see To make video and audio

connections, p. 37.

-To connect a USB device, see Multimedia browser, p. 32.

<Insert the aerial plug firmly into the aerial socket xat the

bottom of the TV.

<Insert the mains cord supplied into the mains at the bottom

of the TV and in the wall socket.

Getting started (Continued)

Tip:for best quality use the suppressor cable supplied.

Warning:verify that the mains supply voltage

corresponds to the voltage printed on the sticker at the

rear of the TV.

USB

Overview of the side connector panel

Connect the antenna

Connect the mains

Remote control

<Insert the 2 batteries supplied (Type R6-1,5V).

Be sure the (+) and (-) ends of the batteries line up

correctly (inside of case is marked.)

For most keys pressing a key once will activate the function.

Pressing a second time will de-activate it.

2560.2 en 13-03-2006 16:17 Pagina 4

BStandby

Press to switch the TV from or to standby mode.

When switched to standby, a red indicator on the TV lights up.

TV Press to select TV mode.

DVD STB VCR AUX

Press to select one of the system modes in which the

remote control can be used.

See Audio and Video equipment keys, p. 48.

DEMO Press to switch the Demo menu on or off.

Colour keys

-When functions are attached to the colour keys, the

colour keys are shown on screen.

-To select a page in Teletext mode.

OPTION

-To open and close the Quick access menu which contains

a few frequently used options, like Picture format.

-When in teletext, press repeatedly to enlarge the teletext

page display. See Teletext, p. 36.

ano function

Cursor keys

Press the cursor keys up/down, left/right to navigate

through the menus.

OK - To activate a setting.

-Starts playing content in the Multimedia Browser

application.

BROWSE/MENU:

To open and close the main menu. See How to navigate

through the menus, p. 11.

bTeletext On/Off

VVolume

Press + or - to adjust the volume.

¬Mute key:interrupt the sound or restore it.

Use of the remote control RC4401/01

Attention:the TV is never powered off completely unless

it is physically unplugged.

2560.2 en 13-03-2006 16:17 Pagina 5

+P- Channel selection

-to browse through the TV channels and sources stored

and marked in the Favourite channels lists;

-to select a page in Teletext mode;

-to quickly browse through the lists in the menus;

- to switch the TV on from standby mode.

0/9 Digit keys

To select a TV channel between 0 and 999.

AV Select your peripherals

See Installation menu, Select your connections, p. 29.

0Previous channel

Press to alternate between the currently viewed and the

previously viewed TV channel.

Ambilight - MODE

Ambilight :

Press to switch Ambilight On or Off. For the Ambilight

settings, see Use of the TV menu settings, Enjoy

Ambilight, p. 19.

MODE :

Press this key repeatedly to toggle through the Ambilight

modes.

Ò ‡ π † Audio and Video equipment keys

See Audio and Video equipment keys, p. 48.

See Multimedia browser functional keys, p. 32.

‡CANCEL:no function

®no function

iOn screen information

Press to display (when available) information about the

selected TV channel and programme.

bDual screen

Press the bkey to show teletext on the right of the

screen.

FAV To display the channels list.

You can create up to four favourite lists.

Use of the remote control RC4401/01 (Continued)

Note:to set the remote control to work peripheral

equipment, see p. 50.

Note:when the TV is switched to standby, and you switch

Ambilight On,Ambilight will be active. Only then less

modes are available.

2560.2 en 13-03-2006 16:17 Pagina 6

The OPTION key allows you to display the Quick access menu

which will give you direct access to some features and menu

options.

1. Press the OPTION key.

>The Quick access menu appears.

2. Press the cursor up/down to select a menu item.

3. Press the OK key to jump to the selected menu item in the

TV menu. (Except for the Clock option).

4. Use the cursor keys to make a selection.

5. Press the OPTION key to exit.

Subtitles:

See Adjust feature menu settings, p. 22.

Picture format:

See Use of the TV menu settings,Adjust picture menu

settings, p. 16.

Equalizer:

See Use of the TV menu settings,Adjust sound menu

settings, p. 17.

Clock:

<Select to activate/deactivate the clock display on the screen.

Use of the OPTION key

Quick access

Subtitles

Picture format

Equalizer

Clock

2560.2 en 13-03-2006 16:17 Pagina 7

Switch the TV on

<Press the power switch Bat the right side of the TV.

>An indicator on the front of the TV lights up and the

screen comes on.

<If the TV is in standby mode, press the -P+ keys or the B

key on the remote control.

Note:the first time (and only the first time) you switch

on your TV, you see a Welcome screen followed by the

installation procedure. See First time installation, p. 9.

In case your remote is lost or broken, apart from

channel selection and volume adjustment, you can still

change some of the basic settings with the keys at the

right side of your TV.

<Press the power switch Bto switch the TV on or off.

The MENU key can be used to summon the TV menu

without the remote control.

<Use:

-the VOLUME - and + keys and the

PROGRAM/CHANNEL - and +keys to select menu

items;

-the MENU key to confirm your selection.

MENU PROGRAM/CHANNELVOL UME B

Note:when activated via the MENU key at the right side

of the TV, only Exit lets you dismiss the menu.

Navigate to Exit,press the cursor right and then press the

MENU key.

Keys at the right side of the TV

2560.2 en 13-03-2006 16:17 Pagina 8

The first time (and only the first time) you switch on your TV,

you see a Welcome screen followed by the installation

procedure.

The installation procedure consists of a series of screens that

will guide you through the installation of your TV.

Follow the instructions on screen.

After the Welcome screen you are asked to select a language of

the TV's on-screen menus.The text of the header and the info

on screen continuously change language.

1. Press the cursor up/down to highlight your language.

2. Press the OK key on the remote control.

3. Follow the instructions on screen to proceed.

First time installation EN

1. Press the green colour key on your remote control when

Television is highlighted.

2. Press the green colour key on your remote control to start

the Automatic channel installation.

>All available TV channels are searched for and stored

automatically.This will take a few minutes.

3. Press the red colour key when the search is completed.

Note:if you choose to install the channels at a later time,

select the Automatic installation in the TV menu,

Installation, Channels, p. 25, to scan available channels.

Note:if the TV has already been installed before and/or you

want to change the First time installation settings, proceed

with Use of the TV menu settings, p. 12.

Step 2: complete the initial TV installation

procedure

Step 1: select your on-screen language

Previous Next Skip Stop

PHILIPS Television

System searching: please wait..........

Stop

PHILIPS Installation

This will help you to install the following

sections:

Television

Settings assistant

Menu language

English

Français

Chinese

Arabic

.............

Please select your

language.....

PHILIPS

using cursor up and

down

2560.2 en 13-03-2006 16:17 Pagina 9

First time installation (Continued)

By means of several split screens/full screens you are

prompted to select your preferred picture, sound and

ambilight settings, to finally arrive at a complete setting

which satisfies you.

1. Press the green colour key on your remote control to enter

the Settings assistant menu.

2. Select your Location with the cursor up/down.

>If you choose Shop it will skip the Settings assistant.

The TV parameters for Picture, Sound and Ambilight will

then be set to predefined fixed settings.

Press the green colour key again to proceed.

>If you choose Home it will display the Settings assistant.

3. Use the cursor left/right to each time select your preferred

screen.

4. Press the green colour key to each time confirm your

selection and to jump to the following screen.

>The following items will be presented sequentially.

In the header it is mentioned how many screens have

been completed and how many screens there are in

total.

The Settings assistant will step sequentially through the

following settings: Picture, Sound and Ambilight.

5. Press the green colour key again to store all the settings

and to return to the TV installation menu.

6. Press the green colour key again to finish the First time

installation procedure and to display the first stored TV

channel.

Note:when you skip or stop the Settings Assistant, then

the standard settings Philips selected for you will be

chosen.

Note:any time you can change or reset your settings or

adjust individual settings for Picture, Sound and Ambilight

in the TV settings menu. See p. 12, Use of the TV menu

settings.

To control the settings of special TV functions, features and

accessory equipment, see p. 22, Adjust feature menu

settings.

Step 3: Settings assistant: select your TV settings

Previous Next Skip Stop

PHILIPS Installation

This will help you to complete the Settings

assistant

Television

Settings assistant

PHILIPS Settings assistant

Please select your location before

continuing:

Home

Shop

2560.2 en 13-03-2006 16:17 Pagina 10

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de TELEVISOR de Philips

Philips

Philips 50PUT6604/75 Manual de usuario

Philips

Philips Essence 5000 Series Manual de usuario

Philips

Philips 40PFL9704H/12 Manual de usuario

Philips

Philips 50PFL5907/F7 Manual de usuario

Philips

Philips 37PFL7662D/05 Manual de usuario

Philips

Philips TPM9.1LA Manual de usuario

Philips

Philips 27PT31B Manual de usuario

Philips

Philips 37PF9731 Manual de usuario

Philips

Philips TV Manual de usuario

Philips

Philips 32PFL2507 Manual de usuario

Philips

Philips 5100 series Manual de usuario

Philips

Philips 32HFL4014 Manual de usuario

Philips

Philips 4101 series Manual de usuario

Philips

Philips HFL3014/12 Series Manual de usuario

Philips

Philips 55PP9401 Manual de usuario

Philips

Philips 32PW6332 - annexe 2 Manual de usuario

Philips

Philips CTV TABLE STEREO 36 INCH TP3669C Manual de usuario

Philips

Philips 15PF5120 Instrucciones de instalación y funcionamiento

Philips

Philips 32PFL3506 Manual de usuario

Philips

Philips 40PFL7705DV Manual de usuario

Philips

Philips 43PFL5766 Manual de usuario

Philips

Philips Magnavox PR1392XI Manual de usuario

Philips

Philips 24PHT5565 Manual de usuario

Philips

Philips LC4.6U AA Manual de usuario

Manuales populares de TELEVISOR de otras marcas

Toshiba

Toshiba 27A10 Manual de usuario

Hitachi

Hitachi 32FX48B Manual de usuario

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario

Changhong Electric

Changhong Electric uhd55b6000is Manual de usuario

Panasonic

Panasonic Genus TX-G10 Manual de usuario

Toshiba

Toshiba 19A20 Manual de usuario

Sony

Sony XBR-100Z9D Manual de usuario

Samsung

Samsung 55S9 B Series Manual de usuario

Sharp

Sharp LC-40FI5012E Manual de usuario

Loewe

Loewe Table Stand Reference 55 Manual de usuario

Sylvania

Sylvania 6427FB Manual de usuario

Sanyo

Sanyo CE19LD90N-B Manual de usuario

North State

North State TV2GO Manual de usuario

RCA

RCA RTU7877 Manual de usuario

Sharp

Sharp 21K-FG1RU Manual de usuario

Sony

Sony Esprit TAV-L1 Manual de usuario

Grundig

Grundig 43 VLE 4820 Manual de usuario

Samsung

Samsung LN26C350D1D Manual de usuario