Philips 28HFL5009D/12 Manual de usuario
Register your product and get support at
www.philips.com/welcome
Installation Manual for MediaSuite and Signature ranges
xxHFL5009D
xxHFL7009D
Status: Release
Version 1.2
Date: August 2014
Author: Marian Pufulete
1
Contents
1. Requirements before starting the installation .......................................................................................................... 3
2. Find out the state of the TV ...................................................................................................................................... 4
3. Re-install TV .............................................................................................................................................................. 5
4. Installation wizard ..................................................................................................................................................... 8
5. Channel options ...................................................................................................................................................... 20
6. Consumer Setup Menu ............................................................................................................................................ 24
7. Professional Settings ............................................................................................................................................... 25
8. Welcome Logo ........................................................................................................................................................ 52
7.1 SmartInfo ................................................................................................................................................................. 52
7.1.2 SmartInfo Show .............................................................................................................................................. 53
7.1.3 SmartInfo Browser ......................................................................................................................................... 53
9. Clone ....................................................................................................................................................................... 54
9. Feature settings ...................................................................................................................................................... 56
10. CSM (Consumer Setup menu) .................................................................................................................................. 61
2
Notice
2014 © TP Vision Netherlands B.V. All rights reserved. Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. TP Vision Netherlands
B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.
TP Vision Netherlands B.V. cannot be held responsible neither for any errors in the content of this document nor for
any problems as a result of the content in this document. Errors reported to Philips will be adapted and published on
the Philips support website as soon as possible.
Help and support
Visit the Philips support website at www.philips.com/support for:
-Leaflet and product documentation
-Download a printable PDF version of the user manual
-Contact details of the helpdesk.
Definitions, Acronyms and Abbreviations
Cold start: Unplug the TV from mains power. Connect TV again to the mains power.
Guest RC: Guest Remote control supplied with the TV
OSD: On Screen Display
CSM: Consumer Setup Menu
OOB: Out of the box state – The TV is unboxed and no option or features were configured
[ ]: The values between brackets are referring to a TV menu item
“”:The values between quotation marks are referring to a remote button
3
1. Requirements before starting the installation
Before starting the installation, make sure that you have everything you need at hand.
Master remote control 22AV8573 or Guest remote control 22AV1109C
And
USB stick
To access the [Professional Setup] menu with master remote control, press the “RC5SETUP” key and then press the
“Home/Menu” button. Using the guest remote control, press the following keys sequential: “3,1,9,7,5,3,MUTE”.
Note: The sequence: “3,1,9,7,5,3, MUTE” will not show the [Professional Setup Menu] if [High Security]
option is enabled.
For the best guest experience it is highly recommended to use the latest software version available.
Go to: http://www.support.philips.com/support
Enter the model number and download the latest software version available. Unzip the software and follow the
instructions how to upgrade the software on the TV. The USB flash drive used for software upgrade must be
formatted as FAT32 and preferably empty to avoid and accidental upload of wrong setting and software. It
recommended first to upgrade the TV and afterwards to perform the installation.
The latest software version and cloning data can be stored on the same USB drive for a 2 in 1 action: software
upgrade and cloning during the instant initial cloning.
4
2. Find out the state of the TV
ItisimportanttoknowifaTVisin‘virginmode’(out of the box) or installed before.
Ifyoucanseethisscreenbelow,youknowthattheTVisin‘out of the box’ state and you can install the set by using
procedure described in chapter 4 of this manual.
Ifyoupoweronthesetandthenpressthe‘Home’ button on the guest remote, you will see this screen appear if the
TV already has been installed or the wizard was already skipped.
Professional Settings ON
Professional Settings OFF
You can start the installation wizard again by reinstalling the TV as explained in chapter 3 of this manual.
Disable the Professional Settings
Access the setup menu press the “RC5 SETUP” key, and then press the “Home/Menu” button. With the guest
remote control, press the following keys in sequence: “3,1,9,7,5,3, MUTE”.
Go to [Professional Mode] and select the [OFF] optionandconfirmwith“OK”.Press “HOME” and select the option
Store and Restart Now, Confirmwith“OK”.Afterrestarting the TV the PROFESSIONAL SETTINGS mode will be set to
OFF.
5
3. Re-install TV
If you want to start an installation from scratch you can always re-install the TV. This can be done by using the
option: Re-install TV set. The Guest menu is offering access to options like subtitle, picture settings, audio settings,
alarm, source and TV guide is displayed below:
If the Professional mode is active you can access the setup menu by pressing the “RC5SETUP” key and then press
the “Home/Menu” button. For the guest remote control, press the following keys in sequence: “3,1,9,7,5,3, MUTE”.
This menu provides access to Consumer Setup Menu and Professional Setup Menu.
Select the option [TV settings] and press “OK” to access the submenu.
6
The [TV settings] menu contains [Picture] settings, [Sound] setting and [General settings].
Using the arrow key to navigate to [General Settings]. To access the items from the right menu use the “right
arrow” key.
Navigate with the “down arrow” key to the [Reinstall TV] option.
Press “OK” to start the reinstallation procedure. To avoid any potential mistakes the TV will request a confirmation
to start the Reinstall procedure.
7
After this operation the TV will power off and on and display the installation wizard.
Note: All settings are at default values and no channel plan is available.
8
4. Installation wizard
When you turn on the TV for the first time, or you have reinstalled the TV, you should see the following screen.
The TV is indicating that a searching process for cloning data on USB key is taking place. If there is no cloning data
available the process can be skipped. If the TV does not find data for cloning will continue to the next step, the
installation wizard
Here you will need to select your preferred language. The language selected will be used for the Consumer Setup
menu and for subtitle and audio language preferences. The language can be change at any moment from the [TV
settings] menu. Please select with the “Up and Down arrow” keys and confirm with “OK” or press the “left arrow”
key.
After this, you will need to select the country. Depending on the country selection, some pre-defined settings will be
activated, because of local broadcast requirements. Example: digital/analog channels could be disabled; reordering
and deleting channels can in some cases not be possible.
Note:Ifyouareexperiencingsomeissuesafterselectingyourcountry,pleaseselect‘Others’inthemenu.
9
The next step is to select the placement of the TV, “Hung on the wall” or “OnaTVstand”. This option will affect
image and sound settings based on the selection.
The next step is to choose between the options [Shop] and [Home]. Please select [Home] option for installation, if
you select [SHOP] a commercial banner will be displayed on the TV. This is for commercial purpose only on shops.
Now you can select the visual and hearing impaired options. If you select [On], your TV will automatically turn on
settings to help visual and hearing impaired people. THE MOST COMMON OPTION IS TO TURN THIS FUNCTION OFF.
Tabla de contenidos
Otros manuales de TELEVISOR de Philips
Philips
Philips 27HT4000D/27 Manual de usuario
Philips
Philips 28PT7120/12 Manual de usuario
Philips
Philips 55PUS9109 Manual de usuario
Philips
Philips TPS2.1E LA Manual de usuario
Philips
Philips 33CE7536 Manual de usuario
Philips
Philips 27PT563S Manual de usuario
Philips
Philips TV 34PT9421 /93 Manual de usuario
Philips
Philips 48PFS8209 Manual de usuario
Philips
Philips 19PFL3205H/12 Manual de usuario
Philips
Philips 32PFL4556/V7 Manual de usuario
Philips
Philips 39PFL1707 Manual de usuario
Philips
Philips 65PFT6520/12 Manual de usuario
Philips
Philips 32PS55S Manual de usuario
Philips
Philips 32RF82S Manual de usuario
Philips
Philips 25PT825B Manual de usuario
Philips
Philips 26HF5335D Manual
Philips
Philips 28PT4404 Manual de usuario
Philips
Philips 32HFL4663S Manual técnico
Philips
Philips 42 PW 9962 Manual de usuario
Philips
Philips 37PF7320/93 Manual de usuario
