Philips HTL1030 Manual de usuario
HTL1030
Soundbar
Content
General Information ................................................3
Safety Instructions
Warnings
Care & Safety Information
Installation
Speaker Placement ................................................4
Input Connections ................................................5
Remote Control ................................................6
Playing TV Audio ................................................7
Play from a USB Storage Device ................................................7
Play From Radio ................................................8
Playing through Bluetooth ................................................8
Trouble Shooting ................................................9
Specification ..............................................10
Warranty ..............................................11
Accessories
Qty.
1. 2 RCA to 2 RCA Cable 1
2. User Manual 1
3. Remote Control 1
4. Rowel Plug + Screw 2 Each
5. Wall Mounting Marker slip 1
2
Safety Instructions
Please read carefully the
Safety Mark on the Back side
This mark is intended to alert
the users from the non isolated
dangerous voltage within the
product that may be of sufficient
magnitude to constitute a risk of
electric shock to persons
This mark is intended to alert
the user for important operating
and servicing instruction
Warnings
*Avoid sustained periods on
high-volume use, and do not turn the
volume to maximum level while using
high output signal, such as Mobile Phone
or DVD, etc., as this will cause distortion
and may damage the loudspeaker cones.
*Please switch off the system from the wall
socket, when not in use.
*Please unplug the system from the
AC outlet when unused for a long time
*Do not open the cover or back panel to
avoid electronic shock or any other
accidents. No user-serviceable parts are
inside.
*Only for indoor use.
*Plug the system to the AC outlet with
the right voltage marked on the back
panel of the Sound Bar.
General Information
Care and safety information
Avoid high temperatures, moisture,
water and dust
– Apparatus should not be exposed to
dripping or splashing of liquid.
– Do not place any sources of danger on
the Bar (e.g. liquid filled
objects, lighted candles).
– Do not install near heat sources.
Do not block any ventilation
openings
– Place the apparatus in a location with
adequate ventilation to prevent
internal heat build up. Allow at least
100cm (4 inches) of free space all
around the apparatus for adequate
ventilation.
– At high volume the back cover of Bar
becomes hot. Do not touch it.
Care of the cabinet
– Use a soft cloth slightly moistened
to clean the cabinet. Do not use a
solution containing alcohol, spirits,
ammonia or abrasives.
!
33
Installation
Remote
*(Use AAA X 2 Battery)
*Battery not provided
4
Soundbar Placement
MARK HOLES WITH MARKING STRIP
DRILL HOLES & PUT ROWELS PLUGS
FIX SCREW AND HANG BAR UNIT
Wall Wall Wall
abc
• Place Speaker Bar on top of a table or mount it on the wall.
• Place it at a height that is closest to the listening ear-level.
• Position Speaker Bar so that it is directly parallel to the listening area.
A
B
Placement
Wall Mounting
Get ready with wall mounting arrangement using provided accessories.
SOUND BAR
Connect from USB
C
AUX
L
R
IN
FM ANTENNA
AUX
L
R
IN
Input Connections
AConnect audio from TV
USB
5
FM ANTENNA
LED TV
Audio Out
Note :
Do not attach soundbar with Earphone / Headphone jack of LED TV.
It may effect the sound and reliability of Soundbar.
AUX
L
R
IN
FM ANTENNA
LED TV
Headphone
Jack
BConnect audio from Satellite Receiver
AUX
L
R
IN
FM ANTENNA
LED TV
SATELLITE RECEIVER
Video
Audio Out
1.
Switches system ON or to STANDBY
2. MUTE
Mute or restore volume
3. VOL+ VOL-
Increase or decrease volume
4.
(a) Play previous file in USB
(b) Tuning down in radio mode
5.
Play and Pause USB / Bluetooth
6. NUMERIC KEYS
Press number key to play directly MP3 files
(Eg. To play 57th song press 5 then 7)
In radio mode key in station frequency
7. EQ
Select preset sound modes in USB / Bluetooth
8.
To rewind
9. SOURCE
To select desired input USB/FM/AUX IN/BT
10. REPEAT
Repeats a track or the entire USB
11.
(a) Play next file in USB
(b) Tuning up in radio mode
12. SOURCE KEYS
USB* - Switch to USB storage device
AUX - Select an audio input
FM - Switch to FM radio
BT - Play on bluetooth mode
13. SCAN
Auto Scan & store station in memory
14. TUN – /+
Up and Down preset channel on FM mode
15.
To forward
16.
Stop Play in USB mode
Remote Control
Note : Equalizer works in USB & Bluetooth mode only.
Recording not works in HTL1030. 6
1
2
3
5
411
6
7
10
9
13
14
815
16
12
* Available when connected.
You can enjoy a theatre experience, just attach TV output to your Sound Bar
AUX IN.
1. Select source from you source key on remote.
2. Display shown AUX.
Button Action
VOL– Volume Decrease
VOL+ Volume Increase
Mute To Mute / Unmute Sound
Play from a USB Storage Device
The Soundbar is fitted with a USB connector that allow you to listen music.
1. Connect the USB storage device to the Soundbar.
2. It auto shifts to USB mode.
3. Display shows USB.
4. Then song number will appear on display.
(eg. if you listening sixteenth songs 016 will appear)
5. Use number key to select song directly or +10 key.
Playing TV Audio
7
Button Action
Select previous or next track
Start, pause or resume Play
To rewind and fast forward
Numeric Buttons Select and song to play
Repeat Repeat track or the entire USB
EQ Select a predefined sound effect
Play from Radio
1. Press source key to select FM.
2. Display shows FM frequency (eg. 104.0).
3. Press following buttons to control play.
8
Play through Bluetooth
You can enjoy music wireless with Bluetooth.
1. Select Source.
2. Display Shown blue (Flashing).
3. Pair "your Bluetooth device with Soundbar name Philips HTL1030.
4. Display stops flashing, once Bluetooth device is paired.
Now your system is ready to play through Bluetooth. Control all
function from your device eg. , , .
Button Action
VOL– Volume Decrease
VOL+ Volume Increase
Mute To Mute / Unmute Sound
Button Action
Search for a radio station
– TUN + TUN Select a preset radio station
SCAN Press to auto scan the radio station
Numeric Keys Key in station frequency (i.e. for 104.6 press 1046)
Note - While autoscan turn off your TV/DVD or other radiation source.
For best reception, while listening to radio, turn off TV/DVD or other
radiation source.
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair.
If you are unable to remedy the problem by following these hints, consult your
dealer or PHILIPS for help.
Problem Solution
No power. — Check if the AC power cord is properly
inserted into the AC mains socket.
No sound or distorted sound. — Adjust the volume.
— Select the correct source
to choose the equipment that you want
to hear through the System.
The remote control does not function — Reduce the distance between the remote
Properly. control and the system.
— Replace the batteries with new ones.
— Point the remote control directly toward the
IR sensor (located on front panel of the
Soundbar).
— Check that the batteries are loaded correctly.
— Switch off system for 30 seconds
and then restart
Low hum or buzz sound. — Place the product as far away as possible
from electrical devices that may be
causing interference.
— Check power supply voltage and consult
electrician
The content of the USB flash drive — The USB flash drive format is not compatible
cannot be read with the system.
Drive is formatted with a different file system
which is not supported by this unit (e.g. NTFS)
Slow operation of the USB Flash — Large file size of high memory USB flash drive
drive takes longer time to read and play.
Cannot detect USB flash drive — Take out USB drive insert it again properly.
FM not properly tuned — Match with local frequency
FM reception not good — While listening radio turn off TV/DVD
or other radiation source.
— Extend antenna wire
Bluetooth — Reduce the distance between system and your
device.
— Re-Pair the device.
Troubleshooting
9
Product Specifications*
* Specification subject to change without prior notice.
Measured under specific conditions.
10
Total System Power 30W RMS
Speaker Bar Power 15W Per Channel
Separation >30db
SNR >60db
Audio Input Socket RCA Type
Power Consumption 13 W
Bluetooth Range Upto 10 Mtrs.
Speaker 1 Way, 2 Speakers
Speaker Size 3"
Impedance 4 Ohm
Frequency Range 150 Hz to 15 KHz
Dimension 715 x 110 x 92 (WXHXD)
Weight 3.3 Kg.
USB
Class Support UMS (USB Mass Storage Class)
Capacity upto 16 GB
File Format MP3
Tabla de contenidos
Otros manuales de Oradores de Philips
Philips
Philips HTS3111 Manual de usuario
Philips
Philips MX2600/77 Manual de usuario
Philips
Philips AD7000W/93 Manual de usuario
Philips
Philips HTL5120 Manual de usuario
Philips
Philips BT3500 Manual de usuario
Philips
Philips DS7650 Manual de usuario
Philips
Philips SPA7380 Manual de usuario
Philips
Philips HTL5160B Manual de usuario
Philips
Philips HTL9100/93 Manual de usuario
Philips
Philips SPA5200 Manual de usuario
Philips
Philips SBCBA105 Manual de usuario
Philips
Philips DS7510 Manual de usuario
Philips
Philips AW9000 Manual de usuario
Philips
Philips HTL2111A Manual de usuario
Philips
Philips Beolink 1000 Manual de usuario
Philips
Philips SBCBC8310 Manual de usuario
Philips
Philips BT4080B/98 Manual de usuario
Philips
Philips SPA2310/05 Manual de usuario
Philips
Philips CSS2113/12 Manual de usuario
Philips
Philips HTL6140B Manual de usuario
