Philips BT4100 Manual de usuario
Register your product and get support at
www.philips.com/support
Always there to help you
Question?
Contact
Philips
User manual
BT4100
1EN
Contents
1 Important 2
Safety 2
2 Your Bluetooth speaker 3
Introduction 3
What's in the box 3
Overview of the speaker 4
3 Get started 5
Connect power 5
Set time 5
Switch to standby mode 5
4 Play from Bluetooth-enabled devices 6
Connect a device 6
Play from Bluetooth device 6
Disconnect the Bluetooth-enabled device 6
Reconnect the Bluetooth device 7
Connect another Bluetooth-enabled
device 7
5 Other features 8
Listen to an external device 8
Charge your mobile devices 8
Adjust volume 8
6 Product information 9
Specications 9
7 Troubleshooting 10
General 10
About Bluetooth device 10
8 Notice 11
Compliance 11
Care of the environment 11
Trademark notice 11
2EN
1 Important
Safety
Warning
• Never remove the casing of this speaker.
• Never lubricate any part of this speaker.
• Never place this speaker on other electrical equipment.
• Keep this speaker away from direct sunlight, naked
amesorheat.
• Make sure that you always have easy access to the
power cord, plug, or adaptor to disconnect the speaker
from the power.
• Make sure that there is enough free space
around the speaker for ventilation.
• Only use attachments or accessories
speciedbythemanufacturer.
• Use only power supplies listed in the user
manual.
• The speaker shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on
thespeaker(e.g.liquidlledobjects,lighted
candles).
• Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
Note
• The type plate is located on the bottom of the
apparatus.
3EN
2 Your Bluetooth
speaker
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this speaker, you can
• play audio from Bluetooth-enabled devices
or other external devices;
• view time; and
• charge your mobile devices.
What's in the box
Check and identify the contents of your
package:
• Speaker
• Short user manual
4EN
Overview of the speaker
a Display panel
• Display time and Bluetooth connection
status.
b - VOL +/SET TIME knob
• Adjust volume.
• Set time.
c
• Enter Bluetooth pairing mode.
• Disconnect Bluetooth connection.
d 5V 1A
• Charge mobile devices with a USB
cable.
e AUDIO IN
• Connect an external audio device.
a
b
c
d
e
5EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
• Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the speaker.
• Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Connect the power adapter to the wall outlet.
» TheBluetoothindicatorashesonthe
display.
Set time
1 Press and hold the SET TIME knob for two
seconds.
» [12HR] or [24HR] blinks on the
display.
2 Rotate the knob to select 12 or 24 hour
format.
3 Presstheknobtoconrm.
» The hour digits blink.
4 Rotate the knob to set the hour.
5 Presstheknobtoconrm.
» The minute digits blink.
6 Repeat steps 4-5 to set the minute.
Switch to standby mode
The speaker switches to standby mode
automatically in the following situations:
• The connection with Bluetooth devices
or other external devices is invalid for 15
minutes; or
• Music playback is stopped for 15 minutes.
6EN
4 Play from
Bluetooth-
enabled devices
With this speaker, you can listen to audio from
Bluetooth-enabled devices.
Connect a device
Note
• Make sure that your Bluetooth device is compatible
with this speaker.
• Before pairing a device with this speaker, read its user
manual for Bluetooth compatibility.
• The speaker can memorize a maximum of 4 paired
devices.Thefthpaireddevicewillreplacetherstone.
• Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
• Any obstacle between this speaker and a Bluetooth
device can reduce the operational range.
• Keep away from any other electronic device that may
cause interference.
• The operational range between this speaker and a
Bluetooth device is approximately 10 meters (30 feet).
1 Make sure that the speaker is in Bluetooth
pairing mode.
» TheBluetoothindicatorashesonthe
display.
2 On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
(see the user manual of the device).
3 Select [Philips BT4100] displayed on your
device for pairing. If necessary, enter default
password “0000”.
» If connection is successful, the speaker
beeps twice, and the Bluetooth
indicator turns solid blue.
» Ifyoufailtond[Philips BT4100]
for pairing, press and hold for two
seconds to enter pairing mode, and
then try again.
LED indicator Description
Flashing blue Connecting;
Waiting for pairing
Solid blue Connected
Play from Bluetooth device
After successful Bluetooth connection, play
audio on the Bluetooth device.
» Audio streams from your Bluetooth
device to the speaker.
Disconnect the Bluetooth-
enabled device
• Press and hold for two seconds;
• Disable Bluetooth on your device; or
• Move the device beyond the
communication range.
» The speaker beeps twice, and the
Bluetoothindicatorashes.
7EN
Reconnect the Bluetooth
device
• When you turn on the speaker, it
reconnects the last connected device
automatically;
• If not, manually select "Philips BT4100"
on your Bluetooth device to start
reconnection.
Connect another Bluetooth-
enabled device
1 Press and hold for two seconds to
disconnect the current connection.
» The speaker enters Bluetooth pairing
mode.
2 Connect another Bluetooth device.
8EN
5 Other features
Listen to an external device
With this speaker, you can also listen to an
external audio device such as an MP3 player.
Note
• Make sure that music playback through Bluetooth is
stopped.
1 Connect an audio input cable (not
supplied) with a 3.5 mm connector on
both ends to
• the AUDIO IN socket on this speaker,
and
• the headphone socket on the external
device.
2 Play audio on the external device (refer to
its user manual).
Charge your mobile devices
You can charge your mobile devices through
the USB socket.
Note
• The USB socket is for charging only.
1 Connect this speaker to AC power.
2 Connect this speaker to your mobile
device with a USB cable (not supplied).
» Once the device is recognized, the
charging starts.
Adjust volume
During play, rotate the - VOL + knob to
increase or decrease volume.
Otros manuales para BT4100
1
Tabla de contenidos
Otros manuales de Oradores de Philips
Philips
Philips HTL1180B Manual de usuario
Philips
Philips MMS8080B Manual de usuario
Philips
Philips BT4200 Manual de usuario
Philips
Philips AD7000W/37 Manual de usuario
Philips
Philips Soundmachine AZ3067 Manual de usuario
Philips
Philips HTL2163B Manual de usuario
Philips
Philips HTL1030 Manual de usuario
Philips
Philips HTL2153B Manual de usuario
Philips
Philips SPA1260 Manual de usuario
Philips
Philips DS8500 Manual de usuario
Philips
Philips NX20 Manual de usuario
Philips
Philips HTL2151/F7 Manual de usuario
Philips
Philips AJT4400B/37 Manual de usuario
Philips
Philips TANX50 Manual de usuario
Philips
Philips HTL4110B Manual de usuario
Philips
Philips FB 830 Manual de usuario
Philips
Philips HTL2111A Manual de usuario
Philips
Philips SBT75RED/37 Manual de usuario
Philips
Philips HTL2163B Manual de usuario
Philips
Philips FB 698 Manual de usuario
