Philips Essence 5000 Series Manual de usuario

TAB5706

5000 Series

www.philips.com/support

User manual

Contents

1 Important 3

Safety 3

Care for your product 4

Care of the environment 4

Compliance 5

Help and support 5

2 Your Soundbar 5

What’s in the Box 5

Main unit 6

Connectors 6

Remote control 7

Prepare the Remote Control 7

Placement 8

Wall mount 9

3 Connect 10

Connect to HDMI Socket 10

Connect to Optical Socket 10

Connect to AUX Socket 11

Connect to Power 11

4 Use your Soundbar 12

Turn ON and OFF 12

Select Source 12

Select Equalizer (EQ) Eect 12

Adjust the Volume 13

Factory Reset 13

Bluetooth Operation 14

USB Operation 15

AUX / OPTICAL / HDMI ARC

Operation 15

5 Product specications 16

6 Troubleshooting 17

Trademarks: 18

English

1 Important

Read and understand all instructions

before you use your product. If damage

is caused by failure to follow instructions,

the warranty does not apply.

Safety

Risk of electric shock or re!

• Before you make or change any

connections, make sure that all

devices are disconnected from the

power outlet.

• Never expose the product and

accessories to rain or water. Never

place liquid containers, such as vases,

near the product. If liquids are spilt

on or into the product, disconnect it

from the power outlet immediately.

Contact Consumer Care to have the

product checked before use.

• Never place the product and

accessories near naked ames or

other heat sources, including direct

sunlight.

• Never insert objects into the

ventilation slots or other openings

on the product.

• Where the mains plug or an

appliance coupler is used as the

disconnect device, the disconnect

device shall remain readily

operable.

• Battery (battery pack or batteries

installed) shall not be exposed to

excessive heat such as sunshine,

re or the like.

• Disconnect the product from the

power outlet before lightning storms.

• When you disconnect the power cord,

always pull the plug, never the cable.

• Use the product in tropical and/or

moderate climates.

Risk of short circuit or re!

• For identication and supply ratings,

see the type plate at the back or

bottom of the product.

• Before you connect the product to

the power outlet, ensure that the

power voltage matches the value

printed on the back or bottom of

the product. Never connect the

product to the power outlet if the

voltage is dierent.

Risk of injury or damage to this product!

• For wall mounting, this product must

be securely attached to the wall

in accordance with the installation

instructions. Use only the supplied

wall mount bracket (if available).

Improper wall mounting may result

in accident, injury or damage. If you

have any query, contact Consumer

Care in your country.

• Never place the product or any

objects on power cords or on other

electrical equipment.

• If the product is transported in

temperatures below 5°C, unpack

the product and wait until its

temperature matches room

temperature before connecting it to

the power outlet.

• Parts of this product can be made

of glass. Handle with care to avoid

injury and damage.

Risk of overheating!

• Never install this product in a

conned space. Always leave a

space of at least four inches around

the product for ventilation. Ensure

curtains or other objects never cover

the ventilation slots on the product.

Risk of contamination!

• Do not mix batteries (old and new

or carbon and alkaine, etc.).

• CAUTION: Danger of explosion if

batteries are incorrectly replaced.

Replace only with the same or

equivalent type.

• Remove batteries if they are

exhausted or if the remote control is

not to be used for a long time.

• Batteries contain chemical

substances, they should be

disposed of properly.

Risk of swallowing batteries!

• The product/remote control may

contain a coin/button type battery,

which can be swallowed. Keep the

battery out of reach of children at

all times! If swallowed, the battery

can cause serious injury or death.

Severe internal burns can occur

within two hours of ingestion.

• If you suspect that a battery

has been swallowed or placed

inside any part of the body, seek

immediate medical attention.

• When you change the batteries,

always keep all new and

used batteries out of reach of

children. Ensure that the battery

compartment is completely secure

after you replace the battery.

• If the battery compartment cannot

be completely secured, discontinue

use of the product. Keep out of

reach of children and contact the

manufacturer.

This is CLASS II apparatus with

double insulation, and no

protective earth provided.

AC voltage

Follow the instructions in the

user manual!

WARNING!

Warning: risk of electric shock!

The exclamatory mark is intended

to alert the user to the presence of

important operating instructions.

Care for your product

Use only microber cloth to clean the

product.

Care of the environment

Disposal of your old product and

battery

Your product is designed and

manufactured with high quality

materials and components, which

can be recycled and reused.

This symbol on a product means

that the product is covered by

European Directive 2012/19/EU.

This symbol means that the product

contains batteries covered by

European Directive 2013/56/EU

which cannot be disposed of with

normal household waste. Inform

yourself about the local separate

collection system for electrical and

electronic products and batteries.

Follow local rules and never

dispose of the product and

batteries with normal household

waste. Correct disposal of old

products and batteries helps

prevent negative consequences for

the environment and human health.

Removing the disposable batteries

To remove the disposable batteries, see

battery installation section.

English

Compliance

This product complies with the radio

interference requirements of the

European Community.

Hereby, TP Vision Europe B.V. declares

that this product is in compliance with the

essential requirements and other relevant

provisions of Directive 2014/53/EU.

You can nd the Declaration of

Conformity on www.p4c.philips.com.

Help and support

For extensive online support, visit

www.philips.com/support to:

• download the user manual and the

quick start guide

• watch video tutorials (available only

for selected models)

• nd answers to frequently answered

questions (FAQs)

• email us a question

• chat with our support

representative.

Follow the instructions on the website

to select your language, and then enter

your product model number.

Alternatively, you can contact Consumer

Care in your country. Before you

contact, note down the model number

and serial number of your product. You

can nd this information on the back or

bottom of your product.

•

2 Your Soundbar

Congratulations on your purchase, and

welcome to Philips! To fully benet from

the support that Philips oers, register

your Soundbar at

www.philips.com/support.

What’s in the Box

Check and identify the items in the

package:

• Soundbar x 1

• Remote Control x 1

• AAA Batteries x 2

• Power Cord * x 3

• Wall Mount kit x 1

(Wall Brackets x2, Screws x2, Dowels x2)

• Safety Sheet / Quick Start Guide

Warranty Card x 1

* The attached items and images may vary by region.

2 X

TAB5706/98 TAB5706/74

Quick start guide

TAB5706/96

* The attached items and images may vary by

region.

• Images, illustrations and drawings shown

on this User Manual are for reference only,

actual product may vary in appearance.

* The attached items and images may vary by region.

2 X

TAB5706/98 TAB5706/74

Quick start guide

TAB5706/96

Main unit

This section includes an overview of the

main unit.

123

1 +/- (Volume)

Increase or decrease volume.

2 (Source)

Select an input source for the

Soundbar.

3 (Standby-On)

Switch the Soundbar On or to

Standby.

4 Soundbar’s LED indicator

Switch the playback source and the

front indicator lights up accordingly.

The indicator light on the front of

the main unit will show which mode

is currently in use.

Status LED State

AUX [AUX/USB] Solid white

USB [AUX/USB] Blinking white

Standby [Standby] Solid red

BT (Bluetooth)

• Connected

• Connection

[BT] Solid white

[BT] Blinking white

OPTICAL [OPTICAL] Solid white

HDMI ARC [HDMI ARC] Solid white

5 Remote Control Sensor

6 Built-in Subwoofer

Connectors

This section includes an overview of the

connectors available on your Soundbar.

1 2 3 4 5

1 AC~

Connect to the power supply.

2 OPTICAL IN

Connect to an optical audio output

on the TV or a digital device.

3 USB

• Audio input from a USB storage

device.

4 AUX IN

Audio input from, for example, an

MP3 player (3.5mm jack).

5 HDMI ARC

The port supports the HDMI ARC

feature, Connect to the HDMI ARC

on the TV.

6 Wall Bracket Screws

English

Remote control

This section includes an overview of the

remote control.

1 (Standby-On)

Switch the Soundbar on or to

standby.

2 Source buttons

AUX: Switch your audio source to

the AUX connection (3.5mm jack).

BT / Pair: Switch to Bluetooth

mode.

Press and hold to activate the

pairing function in Bluetooth mode

or disconnect the existing paired

Bluetooth device.

HDMI ARC: Switch your source to

HDMI ARC connection.

OPTICAL: Switch your audio source

to the optical connection.

USB: Switch to USB mode.

3 +/- (Soundbar’s Volume)

Increase / decrease the soundbar’s

volume.

4 EQ

Select Equalizer (EQ) eect.

5 / (Previous/Next)

Skip to the previous or next track in

USB/BT mode.

• (Play/Pause)

Start, pause or resume play in USB/

BT mode.

6 (Mute)

Mute or restore volume.

7 +/- (Subwoofer’s Volume)

Increase / decrease the built-in

Subwoofer’s volume.

Prepare the Remote

Control

• The provided Remote Control

allows the unit to be operated from

a distance.

• Even if the Remote Control is

operated within the eective range

19.7 feet (6m), remote control

operation may be impossible if

there are any obstacles between

the unit and the remote control.

• If the Remote Control is operated

near other products which generate

infrared rays, or if other remote

control devices using infra-red

rays are used near the unit, it may

operate incorrectly. Conversely,

the other products may operate

incorrectly.

Replace the Remote Control

Battery

1 Press and slide the back cover to

open the battery compartment of

the remote control.

2 Insert two AAA size batteries

(included). Make sure the (+) and

(–) ends of the batteries match the

(+) and (–) ends indicated in the

battery compartment.

3 Close the battery compartment

cover.

Precautions Concerning

Batteries

• Be sure to insert the batteries with

correct positive “” and negative

“” polarities.

• Use batteries of the same type.

Never use different types of

batteries together.

• Either rechargeable or non-

rechargeable batteries can be used.

Refer to the precautions on their

labels.

• Be aware of your fingernails when

removing the battery cover and the

battery.

• Do not drop the remote control.

• Do not allow anything to impact the

remote control.

• Do not spill water or any liquid on

the remote control.

• Do not place the remote control on

a wet object.

• Do not place the remote control

under direct sunlight or near

sources of excessive heat.

• Remove the battery from the

remote control when not in use for

a long period of time, as corrosion

or battery leakage may occur and

result in physical injury, and/or

property damage, and/or fire.

• Do not use any batteries other than

those specified.

• Do not mix new batteries with old

ones.

• Never recharge a battery unless it

is confirmed to be a rechargeable

type.

Placement

For best results, place your Soundbar as

shown

below.

English

Wall mount

Note

• Improper wall mounting may result in accident,

injury or damage. If you have any query,

contact Consumer Care in your country.

• Before wall mounting, make sure the wall can

support the weight of your Soundbar.

• Before wall mount, you need not remove the

rubber feet at the bottom of the Soundbar,

otherwise the rubber feet cannot be xed back.

• Depending on the type of wall mounting your

Soundbar, make sure that you use screws of a

suitable length and diameter.

• Please check whether the USB port on the

back of the Soundbar is connected to a USB

device. If it is found that the connected USB

device aects the wall-mount, you need to use

another USB device of the appropriate size.

Screw length/diameter

Suggested wall mounting height

You are recommended to install the TV

rst before wall mounting the soundbar.

With a TV preinstalled, wall mount the

soundbar 50mm/2.0’’ in distance from

the bottom of the TV.

> 25mm

3.5-4mm

4mm

1 Drill 2 parallel holes (diameter

3-8mm each according to wall

type) on the wall. The distance

between the holes should be

646mm / 25.4”.

» Secure the dowels and screws in

the holes.

2 Remove the screws (x4) from the

main unit.

» Attach the wall brackets (x2) to

the main unit with the screws

removed from the main unit.

3 Hang the Soundbar on the

fastening screws.

646 mm / 25.4"

~50mm/2.0"

3.5-4mm/0.14”-0.16”

4mm/

0.16”

>25mm/0.98”

• The HDMI ARC connector on the

TV might be labeled dierently.

For details, see the TV user

manual.

2 Using a High Speed HDMI cable,

connect the HDMI ARC connector

on your Soundbar to the HDMI ARC

connector on the TV.

Note

• Your TV must support the HDMI-CEC and ARC

function. HDMI-CEC and ARC must be set to

On.

• The setting method of HDMI-CEC and ARC

may dier depending on the TV. For details

about ARC function, please refer to your TV

owner’s manual.

• Make sure to use the HDMI cables can support

the ARC function.

Connect to Optical

Socket

OPTICAL OUT

OPTICAL IN

1 Using an optical cable, connect

the OPTICAL connector on your

Soundbar to the OPTICAL OUT

connector on the TV or other device.

• The digital optical connector

might be labeled SPDIF or

SPDIF OUT.

3 Connect

This section helps you connect your

Soundbar to a TV and other devices,

and then set it up.

For information about the basic

connections of your Soundbar and

accessories, see the quick start guide.

Note

• For identication and supply ratings, see

the type plate at the back or bottom of the

product.

• Before you make or change any connections,

make sure that all devices are disconnected

from the power outlet.

Connect to HDMI Socket

ARC (Audio Return Channel)

Your Soundbar supports HDMI with

Audio Return Channel (ARC). If your TV

is HDMI ARC compliant, you can hear

the TV audio through your Soundbar by

using a single HDMI cable.

HDMI (ARC)

HDMI ARC

1 On your TV, turn on HDMI-CEC

operations. For details, see the TV

user manual.

Otros manuales para Essence 5000 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de altavoces de Philips

Philips

Philips Fidelio B97 Manual de usuario

Philips

Philips HTL2183B/12 Manual de usuario

Philips

Philips CSS2133B/F7 Manual de usuario

Philips

Philips 2000 series Manual de usuario

Philips

Philips MMS171/17 Manual de usuario

Philips

Philips OST690 Manual de usuario

Philips

Philips SS-GNX60 Manual de usuario

Philips

Philips DS8900 Hoja de información del producto

Philips

Philips HTL1190B Manual de usuario

Philips

Philips 6000 Series Manual de usuario

Philips

Philips HTL6140S Manual de usuario

Philips

Philips FWD876 Manual de usuario

Philips

Philips 1000 Series Manual de usuario

Philips

Philips HTL3140B Manual de usuario

Philips

Philips MMS206 Manual de usuario

Philips

Philips Fidelio HTL9100 Manual de usuario

Philips

Philips MMS3031799 Manual de usuario

Philips

Philips MMS222/00 Guía de referencia

Philips

Philips LBC 2502/10 Manual de usuario

Philips

Philips HTL2111A Manual de usuario

Philips

Philips CSS2123/05 Manual de usuario

Philips

Philips MMS460 Manual de usuario

Philips

Philips HTL2101B Manual de usuario

Philips

Philips HTS7111/12 Manual de usuario

Manuales populares de Sistema de altavoces de otras marcas

JVC

JVC CA-MXK5R Manual de usuario

LG NB4532B Manual de usuario

JVC

JVC CA-FSH100 Manual de usuario

5Core

5Core Pro Series Manual de usuario

EAW

EAW MQV1394e Manual de usuario

Lynx

Lynx GXR-LA10A Manual de usuario

iLive

iLive ITB066B Manual de usuario

RDX

RDX QuickStation 4 Manual de usuario

Electro-Voice

Electro-Voice S-122 Manual de usuario

Sven

Sven SPS-619 GOLD Manual de usuario

Pioneer

Pioneer CS-7070 Manual de usuario

EAW

EAW UB82e Manual de usuario

Sondpex

Sondpex Active Speaker System and Digital Music... Manual de usuario

JVC

JVC NX-PN7 Manual de usuario

Marshall Amplification

Marshall Amplification AR-DM61-BT Manual de usuario

Yamaha

Yamaha NX-A01 - Speaker Sys Manual de usuario

SE Audiotechnik

SE Audiotechnik I-LINE Manual de usuario

Gemini

Gemini WRX-843 Series Manual de usuario