Philips 6000 Series Manual de usuario
User manual
Register your product and get support at
www.philips.com/support
Soundbar
6000 series
TAB6405
English
1
Contents
1 Important 2
Help and support 2
Safety 2
Care for your product 3
Care of the environment 3
Caution FCC and IC statement for
Users (USA and Canada only) 4
Compliance 4
What’s in the Box 5
2 Your Soundbar 6
Main unit 6
Connectors 6
Wireless subwoofer 7
Remote control 7
Prepare the Remote Control 8
Placement 8
3 Connect 9
Connect to HDMI ARC Socket 9
Connect to Optical Socket 9
Connect to AUX Socket 9
Connect the IR pass-through cable 10
Connect to Power 10
Pair up with the subwoofer 11
4 Use your Soundbar 12
Turn ON and OFF 12
Select Modes 12
Select Equalizer (EQ) Eect 12
Adjust the Volume 13
Bluetooth Operation 13
AUX / OPTICAL / HDMI ARC Operation 14
USB Operation 14
5 Wall mount 15
6 Product specications 16
7
Troubleshooting 17
2
1 Important
Read and understand all instructions before
you use your product. If damage is caused
by failure to follow instructions, the warranty
does not apply.
Help and support
For extensive online support, visit
www.philips.com/support to:
ͻ download the user manual and the
quick start guide
ͻ watch video tutorials (available only for
selected models)
ͻ nd answers to frequently answered
questions (FAQs)
ͻ email us a question
ͻ chat with our support representative.
Follow the instructions on the website to
select your language, and then enter your
product model number.
Alternatively, you can contact Consumer
Care in your country. Before you contact,
note down the model number and serial
number of your product. You can nd this
information on the back or bottom of your
product.
Safety
Risk of electric shock or re!
ͻ Before you make or change any
connections, make sure that all devices
are disconnected from the power outlet.
ͻ Never expose the product and
accessories to rain or water. Never
place liquid containers, such as vases,
near the product. If liquids are spilt on
or into the product, disconnect it from
the power outlet immediately. Contact
Consumer Care to have the product
checked before use.
ͻ Never place the product and
accessories near naked ames or other
heat sources, including direct sunlight.
ͻ Never insert objects into the ventilation
slots or other openings on the product.
ͻ Where the mains plug or an appliance
coupler is used as the disconnect
device, the disconnect device shall
remain readily operable.
ͻ Battery (battery pack or batteries
installed) shall not be exposed to
excessive heat such as sunshine, re or
the like.
ͻ Disconnect the product from the power
outlet before lightning storms.
ͻ When you disconnect the power cord,
always pull the plug, never the cable.
Risk of short circuit or re!
ͻ For identication and supply ratings, see
the type plate at the back or bottom of
the product.
ͻ Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on
the back or bottom of the product.
Never connect the product to the power
outlet if the voltage is dierent.
Risk of injury or damage to this product!
ͻ For wall mounting, this product must
be securely attached to the wall
in accordance with the installation
instructions. Use only the supplied wall
mount bracket (if available). Improper
wall mounting may result in accident,
injury or damage. If you have any query,
contact Consumer Care in your country.
ͻ Never place the product or any objects
on power cords or on other electrical
equipment.
ͻ If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
ͻ Parts of this product can be made of
glass. Handle with care to avoid injury
and damage.
English
3
Risk of overheating!
ͻ Never install this product in a conned
space. Always leave a space of at least
four inches around the product for
ventilation. Ensure curtains or other
objects never cover the ventilation slots
on the product.
Risk of contamination!
ͻ Do not mix batteries (old and new or
carbon and alkaine, etc.).
ͻ CAUTION: Danger of explosion if
batteries are incorrectly replaced.
Replace only with the same or
equivalent type.
ͻ Remove batteries if they are exhausted
or if the remote control is not to be used
for a long time.
ͻ Batteries contain chemical substances,
they should be disposed of properly.
Risk of swallowing batteries!
ͻ The product/remote control may
contain a coin/button type battery,
which can be swallowed. Keep the
battery out of reach of children at all
times! If swallowed, the battery can
cause serious injury or death. Severe
internal burns can occur within two
hours of ingestion.
ͻ If you suspect that a battery has been
swallowed or placed inside any part
of the body, seek immediate medical
attention.
ͻ When you change the batteries, always
keep all new and used batteries out
of reach of children. Ensure that the
battery compartment is completely
secure after you replace the battery.
ͻ If the battery compartment cannot be
completely secured, discontinue use
of the product. Keep out of reach of
children and contact the manufacturer.
This is CLASS II apparatus with double
insulation, and no protective earth provided.
Care for your product
Use only microber cloth to clean the
product.
Care of the environment
Disposal of your old product and battery
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This symbol on a product means that the
product is covered by European Directive
2012/19/EU.
This symbol means that the product contains
batteries covered by European Directive
2013/56/EU which cannot be disposed of
with normal household waste.
Inform yourself about the local separate
collection system for electrical and
electronic products and batteries. Follow
local rules and never dispose of the product
and batteries with normal household
waste. Correct disposal of old products
and batteries helps prevent negative
consequences for the environment and
human health.
Removing the disposable batteries
To remove the disposable batteries, see
battery installation section.
4
Caution FCC and IC
statement for Users (USA and
Canada only)
FCC INFORMATION
Warning:
ͻ This equipment should be installed and
operated with minimum distance 20cm
between the radiator & your body.
ͻ Changes or modications to this unit
not expressly approved by the party
responsible for compliance could void
the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment o and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
ͻ Reorient or relocate the receiving
antenna.
ͻ Increase the separation between the
equipment and receiver.
ͻ Connect the equipment into an outlet
on a circuit dierent from that to
which the receiver is connected.
ͻ Consult the dealer or an experienced
radio / TV technician for help.
This device contains licence-exempt
transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic
Development Canada’s licence-exempt
RSS(s). Operation is subject to the following
two conditions:
1. This device may not cause interference.
2. This device must accept any
interference, including interference that
may cause undesired operation of the
device.
Compliance
This product complies with the radio
interference requirements of the European
Community.
Hereby, TP Vision Europe B.V. declares
that this product is in compliance with the
essential requirements and other relevant
provisions of Directive 2014/53/EU.
You can nd the Declaration of Conformity
on www.p4c.philips.com.
English
5
What’s in the Box
Check and identify the items in the package:
ijŦ Soundbar x 1
ijŦ Wireless Subwoofer x 1
ijŦ Remote Control x 1
ijŦ Power Cord (for Subwoofer) * x 2
ijŦ DC Adapter (for Soundbar) * x 2
ijŦ IR pass-through Cable x 1
ijŦ IR Bracket x 1
ijŦ Wall Mount kit x 1
(Wall Brackets x2, Screws x2, Dowels x2)
ijŦ Quick Start Guide / Warranty Card /
Safety Sheet x 1
* Power cord quantity and plug type vary by regions.
Wireless Subwoofer
IR pass-through
Cable
Remote Control
IR Bracket
2 X
2 X
DC adapter *
Quick start guide
Warranty Card
Safety Sheet
Power Cord *
(for subwoofer)
Wall Bracket
Gum Cover
Screws (for wall)
6
2 Your Soundbar
Congratulations on your purchase, and
welcome to Philips! To fully benet from
the support that Philips oers, register your
Soundbar at www.philips.com/support.
Main unit
This section includes an overview of the
main unit.
Remote Control Sensor
Soundbar’s LED indicator
Switch the playback source and the
front indicator lights up accordingly. You
may refer to the text on the right for the
corresponding source.
Status LED State
Standby [Standby] Solid red
AUX [AUX/USB] Solid white
USB [AUX/USB] Blinking white
BT (Bluetooth)
ijŦý½Ý
ijŦý½Ý¨Ã½
[BT] Solid white
[BT] Blinking white
OPTICAL [OPTICAL] Solid white
HDMI ARC [HDMI ARC] Solid white
(Standby-On)
Switch the Soundbar On or to Standby.
(Source)
Select an input source for the Soundbar.
+/- (Volume)
Increase or decrease volume.
Connectors
This section includes an overview of the
connectors available on your Soundbar.
DC 24V
Connect to adapter.
USB
ͻ Audio input from a USB storage
device.
ͻ Upgrade software of this product.
AUX
Audio input from, for example, an
MP3 player (3.5mm jack).
IR OUT
IR pass-through cable connector.
OPTICAL
Connect to an optical audio output on
the TV or a digital device.
HDMI ARC
Connect to the HDMI input on the TV.
Wall Bracket Screws
English
7
Wireless subwoofer
This section includes an overview of the
Wireless subwoofer.
AC~ Socket
Connect to the power supply.
Pair button
Press and hold to enter the pairing
mode for the subwoofer.
Subwoofer indicator
Determine the status based on the
wireless subwoofer indicator.
LED State Status
Fast blink Subwoofer in pairing mode
Constant on Connected / Pairing successful
Slow blink Connection / Pairing Failed
Remote control
This section includes an overview of the
remote control.
(Standby-On)
Switch the Soundbar on or to standby.
(Mute)
Mute or restore volume.
Source buttons
Aux: Switch your audio source to the
AUX connection (3.5mm jack).
BT / Pair: Switch to Bluetooth mode.
Press and hold to activate the pairing
function in Bluetooth mode or
disconnect the existing paired Bluetooth
device.
Optical: Switch your audio source to the
optical connection.
HDMI ARC: Switch your source to HDMI
ARC connection.
USB: Switch to USB mode.
EQ
Select Equalizer (EQ) eect.
/ (Previous/Next)
Skip to the previous or next track in
USB/BT mode.
(Play/Pause)
Start, pause or resume play in USB/BT
mode.
+/- (Soundbar’s Volume)
Increase / decrease the soundbar’s
volume.
+/- (Subwoofer’s Volume)
Increase / decrease the subwoofer’s
volume.
8
Prepare the Remote Control
ͻ The provided Remote Control allows the
unit to be operated from a distance.
ͻ Even if the Remote Control is operated
within the eective range 19.7 feet
(6m), remote control operation may be
impossible if there are any obstacles
between the unit and the remote control.
ͻ If the Remote Control is operated near
other products which generate infrared
rays, or if other remote control devices
using infra-red rays are used near
the unit, it may operate incorrectly.
Conversely, the other products may
operate incorrectly.
First-time use:
The unit has a pre-
installed lithium
CR2025 battery.
Remove the
protective tab to
activate the remote
control battery.
Replace the Remote Control Battery
The remote control requires a CR2025, 3V
Lithium battery.
1 Use tools (such as coin batteries/coins)
to catch the groove of the battery box
cover and turn counter-clockwise to
(unlock).
2 Remove the old battery, which is
located in the lid, place the new
CR2025 battery and pay attention to
the correct polarity (+/-).
3 Use the tools to catch the groove of the
battery compartment cover and turn
clockwise to (lock), secure it into the
remote control.
1 2 3
Precautions Concerning Batteries
ͻ When the Remote Control is not to
be used for a long time (more than a
month), remove the battery from the
Remote Control to prevent it from
leaking.
ͻ If the batteries leak, wipe away the
leakage inside the battery compartment
and replace the batteries with new ones.
ͻ Do not use any batteries other than
those specied.
ͻ Do not heat or disassemble batteries.
ͻ Never throw them in re or water.
ͻ Do not carry or store batteries with other
metallic objects. Doing so could cause
batteries to short circuit, leak or explode.
ͻ Never recharge a battery unless it is
conrmed to be a rechargeable type.
Placement
Place the subwoofer at least 1 meter
(3 feet) away from your Soundbar, and ten
centimeters away from the wall.
For best results, place your subwoofer as
shown below.
1m/3ft
10cm/4"
Otros manuales para 6000 Series
20
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Sistema de altavoces de Philips
Philips
Philips HTL3140B Manual de usuario
Philips
Philips MMS260 Manual de usuario
Philips
Philips htl1193b Manual de usuario
Philips
Philips HTL2153B Manual de usuario
Philips
Philips DS7550 Manual de usuario
Philips
Philips AZP6/12 Manual de usuario
Philips
Philips TAB7908 Manual de usuario
Philips
Philips FB 206W Manual de usuario
Philips
Philips SPA4270BT Manual de usuario
Philips
Philips TAB8405 Manual de usuario
Philips
Philips HTL6140B Manual de usuario
Philips
Philips 4000 series Manual de usuario
Philips
Philips HTL2160 Manual de usuario
Philips
Philips FB209W Manual de usuario
Philips
Philips AECS7000 Hoja de información del producto
Philips
Philips HTL3140B Manual de usuario
Philips
Philips OST690 Manual de usuario
Philips
Philips SBA220 Manual de usuario
Philips
Philips amBX SGC6101BD Manual de usuario
Philips
Philips NTX400 Manual de usuario
Manuales populares de Sistema de altavoces de otras marcas
Sondpex
Sondpex Active Speaker System and Digital Music... Manual de usuario
JVC
JVC NX-PN7 Manual de usuario
Marshall Amplification
Marshall Amplification AR-DM61-BT Manual de usuario
Yamaha
Yamaha NX-A01 - Speaker Sys Manual de usuario
SE Audiotechnik
SE Audiotechnik I-LINE Manual de usuario
Gemini
Gemini WRX-843 Series Manual de usuario