Philips Perfect replacement SRP2003 Manual de usuario

SRP2003/27

and get support at

www.philips.com/welcome

EN User Manual 3

ES Instrucciones de manejo 15

FR Mode d’emploi 29

SRP2003_27__Manual_80_210.indd 1 25-09-09 11:06

SRP2003_27__Manual_80_210.indd 2 25-09-09 11:06

3EN

 Tableofcontents

1 YourSRP2003......................................... 3

2 Gettingstarted....................................4-9

2.1 Inserting the batteries ........................... 4

2.2 Testing the universal remote

control ........................................................4-5

2.3 Setting up the universal remote

control ........................................................5-9

3 Usingtheuniversalremote

 control................................................ 9-11

3.1 Keys and functions ...........................9-11

3.2 Resetting a key to its original

function ........................................................11

4 Serviceandsupport......................12-14

4.1 Frequently asked questions ......12-13

4.2 Need help? ................................................14

FCC Compliancy ....................................14

Notice for Canada ................................14

Helpline .......................................................43

Brand list .............................................44-55

YourSRP2003

Congratulations on your purchase of the Philips

SRP2003 universal remote control. After setting

up the remote control you can operate up to 3

different devices with it.

SimpleSetup

Improved with Philips patented (pending)

Simple Setup technology, the SRP2003 can be

set up easily for TV, DVD player / recorder and

all common Cable, Satellite and other set top

boxes, such as DirecTV, Comcast, AT&T, Verizon,

Time Warner, Scientific Atlanta, Tivo and many

more.

Simply follow the instructions in chapter 2.3 to

set up the remote control for your devices.

To fully benefit from the support that Philips

offers, register your product at

www.philips.com/welcome.

YourSRP2003 English

SRP2003_27__Manual_80_210.indd 3 25-09-09 11:06

4EN

Gettingstarted

2.1 Insertingthebatteries

• Insert 2 AAA type

batteries, noting the

+ and -

configuration in the

battery

compartment.

Note

When replacing the batteries, all user settings

will be retained in the remote control

memory for 5 minutes.

2.2 Testingtheuniversalremote

control

It is advised to test whether your device(s)

already respond(s) to the SRP2003 before

setting it up (see chapter 2.3). The example

below instructs you how to do this for your

TV. You can repeat the same steps for other

devices (DVD player/recorder and Cable/

Satellite box) which you want to operate using

the SRP2003.

Example:testingtheuniversalremotecontrol

onyourTV:

1 SwitchON your TV manually or use the

original remote control for this. Tune to

channel 1.

2 Press the

device selection key

to select TV.

• The red Setup

light lights up.

• If the light does not

light up, check whether the batteries are

properly inserted (see chapter 2.1).

SRP2003_27__Manual_80_210.indd 4 25-09-09 11:06

5EN

3 Check whether the

keys that you need

for operating your

TV are working. For

an overview of the

keys and their

functions see chapter 3.1.

• If the TV responds as it should to all

of the key commands, the SRP2003 is

ready for use.

• Ifthedevicedoesnotrespondatallor

nottoallofthekeycommands,followthe

instructionsinchapter2.3.

2.3 Settinguptheuniversalremote

control

This is only necessary if your device does not

respond to the SRP2003. If that is the case, the

SRP2003 does not recognize the brand and / or

model of your device and you need to set up

the remote control to do so.

The example below instructs you how to do this

for your TV. You can repeat the same steps for

other devices (

DVD player/recorder and Cable/

Satellite box

) which you want to operate, using

the SRP2003.

The remote control can be set up to operate

any 3 of the following devices:

Devicename Description

TV Traditional TV, at screen

TV and projection TV, TV

part of TV / VCR, TV / VCR

/ DVD and TV / DVD

combos

DVD DVD player / recorder

(DVDR), DVD / Hard

Disk Drive combination

(DVDR-HDD), Blu-Ray

player, High Denition

DVD player (HD-DVD),

DVD part of TV / DVD, TV

/ VCR / DVD and VCR /

DVD combos

Gettingstarted English

SRP2003_27__Manual_80_210.indd 5 25-09-09 11:06

6EN

CBL/SAT Cable box, satellite

receiver, Internet Protocol

TV (IPTV), Free To Air TV,

High Denition Television

decoder (HDTV) and Tivo

Example:settinguptheuniversalremote

controltooperateyourTV:

1 SwitchON the TV manually or use the

original remote control for this. Tune to

channel 1.

2 Pressandholdthe

device selection

key for5seconds

until the red Setup

light remains lit .

The remote control

is now in setup mode.

3 Look up the 4-digit

code for your brand

in the

brand list

the back of this user

manual.

A 4-digit code is

shown for each brand.

Use the digit keys

to enter the code

for your brand

(e.g. Philips,

• If the red Setup

light turns off, an invalid code was

entered. In this case, try again.

4 Aim the remote

control at the TV.

Pressandhold the

key. Release it

immediately as soon

the TV switches off.

• This step normally takes between

5 and 60 seconds. In extreme

circumstances this step can take up to

15 minutes.

5sec.

5-60sec.

5-60 SEC

SRP2003_27__Manual_80_210.indd 6 25-09-09 11:06

7EN

5 SwitchON the TV.

Try out the keys

you need for

operating it. Try, for

example, if the - CH

+ and digit keys

function properly.

• If a key does not work as expected, press

andhold that key. Release it immediatelyas

soon as it works. For more information, see

chapter 2.3.2.

6 Press the

device selection key

twice to finish setup.

• When no key

is pressed for

5 minutes or

more, the remote control will exit setup

mode, automatically saving all your

settings.

Important

If you made a mistake:

• Press the device selection key twice to exit

setup. The red Setup light turns off.

•

Restart from the beginning.

• Ifthedevicedoesnotrespondatallornotto

allofthekeycommandsorifyoucannotfind

thecodeforyourbrand,enter‘9,9,9,9’instep

3andcontinuewithstep4.Theremotecontrol

willnowsearchitsfulldatabaseforacode

thatworkswithyourTV.Fulldatabasesearch

maytakeupto15minutes.

2.3.1 Settinguptheremotecontrolfor

otherdevices(

DVD player/recorder

and Cable/Satellite box

)

1 Make sure the device is turned on, fully

operational and able to respond to remote

control commands. E.g. insert a disc in the

DVD player / recorder or a video cassette in

the VCR.

2 Then follow steps 2 to 6 of ‘Setting up the

remote control for your TV’. Make sure to

use the correct device selection key: or

Gettingstarted

2x

English

SRP2003_27__Manual_80_210.indd 7 25-09-09 11:06

8EN

2.3.2 Improvingkeys

When correctly set up, the remote control

should be able to operate all your devices.

However, when using the remote control for the

first time it might occur that some keys do not

yet function as expected.

In this case you can have the remote control

search for alternatives.

Note

Improving keys is not possible when the code

was found during full database search (with

code ‘9, 9, 9, 9’).

Duringinitialsetup

1 Make sure the receiving device is able to

respond. E.g. when you try to repair the Play

key for your DVD player, make sure to insert

a DVD into the DVD player otherwise the

Play key is not able to function.

2 Press the key that does not function, keep it

pressed and immediately release it when the

device responds. Repeat this for every key

that does not function.

• If the key still does not function as expected,

try pressing it again for a longer period of

time.

Afterinitialsetup

1 Make sure the receiving device is able to

respond. E.g. when you try to repair the Play

key for your DVD player, make sure to insert

a DVD into the DVD player otherwise the

Play key is not able to function.

2 Select the device

that you wish to

operate

(e.g. DVD).

Press the device

selection key to

select DVD.

3 Keep keys

and



pressed

simultaneouslyfor5

seconds.

• The red Setup

light lights

up. The remote control is now in setup

mode.

5sec.

SRP2003_27__Manual_80_210.indd 8 25-09-09 11:06

9EN

English

Pressandhold the key that does not

function and immediately release it when

the device responds.

• If the key still does not function as expected,

try pressing it again for a longer period of

time.

5 Press the device

selection key twice

to save your settings

and exit setup

mode.

• When no key

is pressed for 5 minutes or more, the

remote control will exit setup mode,

automatically saving all your settings.

3Usingtheuniversal

remotecontrol

3.1 Keysandfunctions

The illustration on page 2 gives an overview of

all keys on the remote control. Try out the keys

you need for operating your devices.

Notes

• Keys having the same functions as the

keys on your original remote control may

have different namings on the SRP2003

(e.g. Info / Display).

• Only functions that are available on your

original remote control can be used for

operating your devices with the SRP2003.

1 .................................... Setup light.

• lights up red when the

remote control is in

setup mode.

• lights up red when

a remote control

command is being sent.

2 ............................... selects available source

inputs (antenna, cable,

etc.).

3 .................. device selection keys.

Select the device to be

operated.

Usingtheuniversalremotecontrol

2x

SRP2003_27__Manual_80_210.indd 9 25-09-09 11:06

10 EN



GUIDE ....................... electronic program guide.

 MENU ........................ menu on / off.

INFO........................... on-screen channel

information.

EXIT ............................ exits / clears on-screen

menu displays.

3 4 1 2 ............... cursor up, down, left,

right in a menu.

OK ............................... confirms your selection.

A,B,C,D ..................

Context sensitivity keys,

ordered following the

requirements for cable

boxes.

A - Yellow, B - Blue, C - Red,

D - Green.



+VOL- ...................... adjusts TV volume.

 ................................ mutes TV sound.

 ................................ previous program / Last.

+CH- ....................... previous / next channel.



5 .................................. rewind.

2 .................................... play.

6 .................................. fast forward.

9 .................................... stop.

0 ................................... record.

; ..................................... pause.

4P3P ........................ previous (4P) / next

(3P) page / track in

various modes.

/ ....................... set your Thumb ratings.

7 ................................ used after direct channel

selection. Some devices

require ENTER to be

pressed after channel

selection.

..........................selects between one

and two-figure channel

numbers.

SRP2003_27__Manual_80_210.indd 10 25-09-09 11:06

Otros manuales para Perfect replacement SRP2003

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Mando a distancia de Philips

Philips

Philips SRU 538/86 Manual de usuario

Philips

Philips SRP5004/53 Manual de usuario

Philips

Philips SRP4004 Manual de usuario

Philips

Philips Prestigo SRT8215/10 Manual de usuario

Philips

Philips SpeechMike LFH3500 Manual de usuario

Philips

Philips Trilingual Front CoverArt PH5DSS Manual de usuario

Philips

Philips SRU2103S Manual de usuario

Philips

Philips 22AV1105 Manual de usuario

Philips

Philips RC9800I Manual de usuario

Philips

Philips Pronto SBC RU 950 Manual del sistema

Philips

Philips SBCRU440/P00 Manual de usuario

Philips

Philips Prestigo SRU8015/34 Manual de usuario

Philips

Philips SRU5130/53 Manual de usuario

Philips

Philips SRP2002/10 Manual de usuario

Philips

Philips SBC RU 220/00 Manual de usuario

Philips

Philips Universal SBC RU 151 Manual del sistema

Philips

Philips SRP6219G/27 Manual de usuario

Philips

Philips SBC RU 510 Manual de usuario

Philips

Philips SBCRU610/00 Manual de usuario

Philips

Philips ipronto TSi6400 Manual de usuario

Philips

Philips 22AV1106B Manual de usuario

Philips

Philips SBC RU 930 Instrucciones de uso

Philips

Philips SRU3003/27 Manual de usuario

Philips

Philips Pronto SBCRU930 Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación