Philips BT6600 Manual de usuario

BT6600

www.philips.com/support

User manual

1EN

Contents

1 Important 1

2 Your Bluetooth speaker 2

Introduction 2

What's in the box 2

Overview of the speaker 3

3 Get started 4

Power supply 4

Turn on/o 5

4 Use Bluetooth devices 6

Connect a device 6

Connect three Bluetooth

devices simultaneously 7

Play from Bluetooth device 7

Control your phone call 7

Clear pairing information 7

5 Other features 8

Listen to an external device 8

Charge your device 8

Adjust volume 8

6 Specications 9

7 Troubleshooting 10

General 10

About Bluetooth device 10

8 Notice 11

Care of the environment 11

Trademark notice 11

1EN

1 Important

Warning

•Never remove the casing of this speaker.

•Never place this speaker on other electrical

equipment.

•Keep this speaker away from direct

sunlight, naked ames or heat.

•Make sure that you always have easy

access to the power cord, plug, or adaptor

to disconnect the speaker from the power.

• Make sure that there is enough

free space around the speaker for

ventilation.

• After use under humid

circumstance, immediately clean

the product with a soft dry cloth.

• The battery shall not be exposed

to excessive heat such as sunshine,

re or the like.

• The adapter shall not be exposed

to dripping or splashing.

• No objects lled with liquids shall

be placed on the adapter.

• Use only power supplies listed in

the user manual.

• Where the plug of the Direct Plug-in

Adapter is used as the disconnect

device, the disconnect device shall

remain readily operable.

Note

• The type plate is located on the bottom of

the apparatus.

2EN

2 Your

Bluetooth

speaker

Congratulations on your purchase, and

welcome to Philips! To fully benet from

the support that Philips oers, register

your product at www.philips.com/

welcome.

Introduction

This speaker has passed splash-proof

test (IPX4) and can be used near water.

With this speaker, you can enjoy audio

from Bluetooth-enabled devices or

other external devices.

What's in the box

Check and identify the contents of your

package:

• Speaker

• USB adapter head

• USB cable for charging (X 2)

• Charging base

• Printed materials

Quick Start Guide

3EN

Overview of the speaker

a /MULTIPAIR

• Enter Bluetooth pairing mode.

• Disconnect Bluetooth

connection.

• Clear Bluetooth pairing

information.

• Answer or reject an incoming

call.

• End the current phone call.

• Transfer the call to your mobile

device.

b NFC

• Connect a NFC compatible

device through Bluetooth.

c LED indicator

• Indicate battery or Bluetooth

connection status.

d Volume knob ( )

• Turn the speaker on or o.

• Adjust volume.

e DC IN

• Charge the built-in battery.

f AUDIO IN

• Connect an external audio

device.

g CHARGING (5 V 2.1 A)

• Charge your mobile device.

4EN

3 Get started

Always follow the instructions in this

chapter in sequence.

Power supply

Either AC power or battery can be used

as power supply of this product.

Option 1: Battery power

The speaker can operate on the built-in

rechargeable battery.

Note

•Rechargeable battery has a limited number

of charge cycles. Battery life and number of

charge cycles vary by use and settings.

•It takes approximately four hours to fully

charge the battery.

•The LED indicator ashes red when the

battery is low.

To recharge the built-in battery:

• Dock the speaker into the charging

base, then connect the speaker to

AC power by using the supplied

adaptor; or

• Connect the speaker to AC power

by using the supplied adaptor

directly.

Battery status LED indicator

Under charging Solid red（in

power-o mode）;

Flashing red for

three seconds,

then turn blue (in

power-on mode)

Fully charged O（in power-o

mode）

Option 2: AC power

Caution

•Risk of product damage! Make sure that the

power voltage corresponds to the voltage

printed on the back or underside of the

speaker.

•Risk of electric shock! When you unplug the

AC adapter, always pull the plug from the

socket. Never pull the cord.

Connect the adapter to:

• the DC IN socket on the speaker or

on the charging base;

• the power outlet.

5EN

Turn on/o

To turn the speaker on or o, rotate the

knob clockwise or anticlockwise until

you hear a click.

» When the speaker is turned on, the

blue LED indicator ashes.

» When the speaker is turned o, the

blue LED indicator lights o.

OFF

Note

•If the battery is low, the red LED indicator

ashes.

Switch to standby mode

When there is no operation and

audio ouput for 15 minutes, the

speaker switches to standby mode

automatically.

Note

•To wake up the speaker from standby

mode, press or tap the NFC tag on the

top of the speaker with your Bluetooth

device.

6EN

4 Use

Bluetooth

devices

With this speaker, you can listen to

audio from Bluetooth-enabled devices

and control the incoming call through

Bluetooth.

Connect a device

Note

•Make sure that Bluetooth function is

enabled on your device, and your device is

set as visible to all other Bluetooth devices.

•Any obstacle between this speaker

and a Bluetooth device can reduce the

operational range.

•Keep away from any other electronic

device that may cause interference.

•The operational range between this

speaker and a Bluetooth device is

approximately 10 meters (30 feet).

Option 1: Connect a device

through NFC

Near Field Communication (NFC) is a

technology that enables short-range

wireless communication between

various NFC compatible devices, such

as mobile phones and IC tags.

If your Bluetooth device supports NFC,

you can connect it with this speaker

easily.

1 Enable NFC on your Bluetooth

device (refer to its user manual).

2 Turn on the speaker.

» The blue LED indicator ashes.

3 Tap the NFC tag on the top of the

speaker with the NFC area of your

Bluetooth device.

4 Follow the on-screen instructions

to complete the pairing and

connection.

» After successful connection, the

speaker beeps twice, and the

LED indicator turns solid blue.

Option 2: Connect a device

manually

1 On your Bluetooth device, enable

Bluetooth and search for Bluetooth

devices that can be paired (see the

user manual of the device).

2 Turn on the speaker.

» The blue LED indicator ashes.

3 Select [Philips BT6600] displayed

on your device for pairing. If

necessary, input “0000” as the

pairing password.

» After successful connection, the

speaker beeps twice, and the

LED indicator turns solid blue.

Tip

•If the speaker is playing audio from a

connected Bluetooth device, it will not

beep after connected to another device.

7EN

LED indicator Description

Flashing blue

quickly

Ready for pairing

Flashing blue slowly Connecting

Solid blue Connected

Connect three Bluetooth

devices simultaneously

The speaker can connect to three

Bluetooth devices at the same time.

• If the speaker is connected to one

device, repeat the above steps to

connect to the second and third

device (see the above section

“Connect a device”).

• If the speaker is connected to three

devices, press and hold for two

seconds.

» The speaker disconnects the

earliest device which is not

playing music, and gets ready to

pair with another device.

2 sec.

Play from Bluetooth

device

Note

•If there is an incoming call on the

connected mobile phone, music play

pauses.

• After successful Bluetooth

connection, play audio on the

Bluetooth device.

» Audio streams from your

Bluetooth device to the speaker.

• If more than one device is

connected with the speaker, play

audio from any connected devices,

and the music playback through the

other device is paused.

Control your phone call

After Bluetooth connection, you can

control an incoming call with this

speaker.

Button Function

Press to answer an incoming

call.

Press and hold for two

seconds to reject an

incoming call.

During a call, press to end

the current call.

During a call, press and hold

for two seconds to transfer

the call to your mobile device.

Clear pairing information

Press and hold for 7 seconds to clear

Bluetooth pairing information.

Otros manuales para BT6600

Tabla de contenidos

Otros manuales de Altavoces portátiles de Philips

Philips

Philips SBA3000/37 Manual de usuario

Philips

Philips SBA3011ORG/37 Manual de usuario

Philips

Philips BT100 Manual de usuario

Philips

Philips AEM120BLU Manual de usuario

Philips

Philips BT2200 Hoja de información del producto

Philips

Philips SBM100 Manual de usuario

Philips

Philips SBT30/00 Manual de usuario

Philips

Philips SBA1610PNK/37 Manual de usuario

Philips

Philips SBM110BLE Manual de usuario

Philips

Philips BT7700 Manual de usuario

Philips

Philips SB2000 Manual de usuario

Philips

Philips SBM120 Manual de usuario

Philips

Philips P8 Manual de usuario

Philips

Philips EverPlay BT7900 Manual de usuario

Philips

Philips SBA1700/00 Manual de usuario

Philips

Philips P8 Manual de usuario

Philips

Philips AT11/94 Manual de usuario

Philips

Philips SBA3000 Manual de usuario

Philips

Philips SBA290/05 Manual de usuario

Philips

Philips SBA3110/37 Manual de usuario

Philips

Philips SBT300/12 Manual de usuario

Philips

Philips SBD4000/27 Manual de usuario

Philips

Philips P8/10 Manual de usuario

Philips

Philips SBA3010/85 Manual de usuario

Manuales populares de Altavoces portátiles de otras marcas

Monster

Monster Rockin Roller 2 Manual de usuario

Blueant

Blueant BLUESONIC Manual de usuario

Altec

Altec 730C Manual de usuario

Aiwa

Aiwa BST-330 Manual de usuario

Prestigio

Prestigio PIS1 Manual de usuario

Akai

Akai AWS08BK Manual de usuario

Wren

Wren V5BT Manual de usuario

Sven

Sven PS-320 Manual de usuario

Urban revolt

Urban revolt Streetbox Manual de usuario

Gembird

Gembird TD-SPKBT-04 Series Manual de usuario

Panacom

Panacom monsoon Manual de usuario

Lenovo

Lenovo speaker M0520 Manual de usuario

Mackie

Mackie THUMP GO Manual de usuario

Trevi

Trevi XR 400 APP Manual de usuario

Trevi

Trevi XF 4200 DJ Manual de usuario

ION

ION PARTY POWER iPA19C Manual de usuario

Excalibur

Excalibur 180 Manual de usuario

Trevi

Trevi XF 550 APP Manual de usuario