Philips MCM7000/12 Manual de usuario

Published by Sophie-KM 1114 AVM Printed in the Netherlands

MCM7000/12

Subject to modi cation EN

Micro System

egaPstnetnoC Contents Page

retrieval system or transmitted, in any form or by any means, electronic,

mechanical, photocopying, or otherwise without the prior permission of Philips.

Version 1.0

1 Technical Specification and Connection Facilities

2 Laser Beam Safety Precautions......................................... 2-1

3 Important Safety Precautions .................................. 3-1 to 3-2

4 Safety Check After Servicing ............................................. 4-1

6 Standard Notes For Servicing,Lead Free Requirements

& Handling Flat Pack IC .......................................... 6-1 to 6-4

5 Safety Information General Notes & Lead Free

7 Direction of Use ....................................................... 7-1 to 7-3

8 Cabinet Disassembly Instructions ........................... 8-1 to 8-2

12 AMP Board

9 Troubleshooting ....................................................... 9-1 to 9-2

10 Block Diagram .................................................................10-1

11 Wiring Diagram ...............................................................11-1

13 Display Board

14 Headphone & MP3 Link and USB、LED Board

Layout Diagram.................................................12-5

15 Key Board

17 Decoder Board

18 Exploded View....................................................................13-1

19 Revision List .......................................................................14-1

16 Power Board

Circuit Diagram .................................................12-6

Circuit Diagram ........................................12-8 to 12-9

Layout Diagram ................................................12-7

Layout Diagram ..............................................12-10

Circuit Diagram .................................12-11 to 12-13

Layout Diagram ..............................................12-14

...................................................1-1 to 1-9

Circuit Diagram ....................................................12-1

Layout Diagram ...................................................12-2

Circuit Diagram ................................................12-3

Circuit Diagram .................................................12-5

Layout Diagram ...............................................12-4

Requirements .................................................................... 5-1

Features

RDS

Voltage Selector

ECO Standby

DTS

Feature

Different /12

Location of PC Boards

Version Variations

Type /Versions:

Features

Board in used:

MCM7000

Service policy

LED Board

Headphone & MP3 Link Board

Power Board

USB Board

Key Board

Decoder Board

AMP Board

Display Board

* TIPS : C -- Component Lever Repair.

M -- Module Lever Repair

-- Used

/55

/58

/61

/79

/93

/94

/96

/98

/51

/37

/12

/05

Feature diffrence

RDS

DTS

VOLTAGE SELECTOR

ECO STANDBY - DARK

Type /Versions

MCM7000

Technical Specification and Connection Facilities

Power Board

LED Board

Display Board

Headphone/MP3 Link Board

Decoder Board

AMP Board

DVD Loader

Key Board

USB Board

1-1

Technical Specification

Technical Specification and Connection Facilities

1-2

1. General Information and Requirement

1.1 Product Family Features

1.1.1 Identity and Key Features

MCM7000 series are Heritage Range Micro Audio System

CD/MP3 player with USB and Tuner FM(20presets)

Elements to include as generic requirements:

1. Detachable mains cord

2. Safety certification (cUL/FCC and CB/EMC/CE)

Following is a list of key features:

1. USB true source

a) MSC & MTP

b) USB High Speed

2. iPod/iPhone docking – Integrated, support iPad

3. MP3 Link (via headphones jack from PC or MP3 player)

4. Headphone Out (Front of the set TBC)

5. Tuner FM

6. Total output power 2x30Wrms

2.1.2 Styling, Forms and Functions

MCM7000 appearances are defined in their respective MUS. MUS is the leading document where product

appearance is applicable..

Features Products MCM7000

Stroke versions All

Design Refer to MUS[3] for

details

Optical Drive Loading Tray

wolebnoitacoLyarT

Tray Orientation HORIZONTAL

Front

PUDFV

mm3tee

Main Unit

Speaker Box

ffothgieH

Dimension

W x D x H (mm)

250X92X285mm

174X260X240mm

Weight With packaging 10kg

roloC

Cosmetics Silver

Silver

snottuB

Technical Specification and Connection Facilities

1-3

2.1.3 External I/O Connections

Model

Stroke Version

MCM7000

All

USB

MP3 Link

(3.5mm audio jack)

Aux In

(RCA cinch)

Tuner Socket

(for FM)

Headphone Out

(3.5mm audio jack)

2.1.4 Controls, Local Display and LED Indications(tbc)

Control keys on the set are:

MCM7000

Standby

Model

Source(Disc/USB/FM/Aux/MP3_link)

Eject

Play/Pause

Volume Rotator

DSC N

DBB N

Treble Rotator

Bass Rotator

There is local display VFD. Standby LED colour: Blue in Standby mode

Technical Specification and Connection Facilities

1-4

2.1.5. ACCESSORIES (tbc)

Model MCM7000

Stroke Version 12

eporuEnoigeR

Power Cord 1.8M

AV cable 1.5M

Audio cable

(3.5mm audio) 0.5M

Tuner Antenna 1.5M 75ohm

Speaker cable 3M

USB cable NA

Remote Control 44keys

Battery AAAx2

Quickly guide 1

IFU 1

3.Mechanical General Information

The product appearances and functions are defined in their respective MUS.Product management

approves the MUS and it is a leading document where product appearance is applicable.

Please refer to Sh560 for mechanical information.

3.1.Safety Standards

Where applicable:

For /12 (EU), /05 (UK), /51 (Russia) EN/IEC 60065 7th

Edition

56006LU)adanaC,SU(73/roF

756006CEI)lizarB(87/,)MATAL(55/roF th

Edition

For /98 (AP), /69 (Singapore), /75 (Australia) IEC 60065 7 th

Edition

756006CEI(8988BG)anihC(39/roF thEdition)

656

006K)aeroK(16/roF th

Edition

6006CEI(80441SNC)nawiaT(69/roF thEdition)

3.2.EMC Requirements

Where applicable:

For /12 (EU), /05 (UK), /51 (Russia) EN55013: 2001, EN55020: 2002

51CCF)adanaC,SU(73/roF

31RPSIC)lizarB(87/,)MATAL(55/roF

For /98 (AP), /69 (Singapore), /75 (Australia) CISPR13

02/31RPSIC)aeroK(16/roF

)31RPSIC(73831BG)anih

C(39/roF

)31RPSIC(93431SNC)nawiaT(69/roF

Technical Specification and Connection Facilities

1-5

3.3.ESD Requirements

The product shall withstand electro static discharges on all user accessible parts of the product.

Reference: IEC61000-4-2.

For contact discharges:

For air discharge:

General requirement:

1. 10 arcs for positive and negative polarity for unit “on” and “off” for 1kV incremental steps.

2. Component or mechanical damage is not allowed. No loss of fixed stored data (stored in EEPROMs).

3. Hang-ups and malfunctions are allowed, as long as the customer can “recover” from the hang-up by

pressing the Standby or ON/OFF button of the set.

4. Failures that disappear only by unplugging the AC mains cord and/or power sources are not acceptable.

3.4.Environmental Condition

The environmental condition requirements and test method is according to UAN-D1590.

Ambient temperature : max. 40 㷄- all climates

Apparatus acc. to spec. : +5 to + 35㷄

Vibration test (acc. IEC 60 068/2/6) : operational vibration test to be proceeded in operating position of the

set.

Level

2 >2-4 >3-4

3 >4-5 >4-5

4 >5-7 >5-7

5 - >7-8

Short perceptible deviations allowed

Normal recallable functions functon changes allowed.

3 >8-10 >8-10 Normal recallable functions functon changes allowed.

Control recallable functions function changes allowed.

4 >10-15 >10-15 Control recallable functions function changes allowed.

No loss of stored data allowed.

5 - >15-18 No loss of stored data allowed.

0-2 0-3 No deviations allowed.

1 0-4 0-6 No deviations allowed.

2 >4-8 >6-8

General(kV) USA(kV) Requirement

Level General(kV) USA(kV) Requirement

3.5.Quality

PQR-class: class 2 according to BLC A&MA PQR handbook V2.1 (2006-10-02)

Lifetime: 7 years

Tested According to: General Test Instruction UAN-D 1591

Measured According to: UAN_L 1059 unless otherwise stated

Technical Specification and Connection Facilities

1-6

4. Technical Specifications

Power Supply

4.1.1 Type and versions

Build-inSMPS will be used for all models and stroke versions.

All using figure '8' socket, will cater for all versions:

Versions Region/Country SMPS Detachable mains cords

EUROPE/UK

37 NAFTA

/12

UL flat pin (non-polarized)

INMETRO certified round 2-pin

EU(/12)round 2-pin & UK(/05) 3-pin

LATAM

APAC

India

1) 100 ~240Vac nom. (wide

range from 90V~264Vac limit)

used in all versions except

India.

Frequency: 47~63Hz. EU round 2-pin

2) 100 ~310Vac limit (India

compatible with up cost) used

only for India.

Frequency: 47~63Hz.

EU (/12) round 2-pin

All requirements per defined for each country should be met with sufficient testing.

4.1.2 Surge Immunity (Lightning Test)

The product shall withstand mains interference’s of:

Differential mode:

2kV/2 ohm criteria C for Europe.

6kV/12 ohm criteria C for NAFTA.

Parameters:

Bi-wave

Open circuit voltage: 2/50us

Short circuit current: 8/20us

From +/1kV to +/-2kV (for Europe) or +/-6kV (for Nafta) in steps of 1kV.

10 shots per combination.

One shot per minute.

Serial impedance: 2 Ohm for Europe, 12Ohm for Nafta.

Polarity and phase: Positive (phase 90º) & Negative (phase 270º)

Common mode:

6kV/2 ohm criteria C for Europe.

6kV/12 ohm criteria C for Nafta.

Parameters:

Ring-wave (100kHz)

From +/3kV to +/-6kV in steps of 1 kV.

10 shots per combination.

One shot per minute.

Serial impedance: 2 Ohm for Europe, 12Ohm for Nafta

Polarity and phase: Positive (phase 90º) & Negative (phase 270º)

Reference: IEC61000-4-5 and for USA: 3135 019 8029 Reliability evaluation.

Requirements:

Apparatus should fulfil the leakage current requirements of IEC60065 point 9.1.1 (UAN-D1631)

Defects or permanent deviations are not allowed.

Technical Specification and Connection Facilities

1-7

4.1.3 Mains Drop-out Immunity

The product shall withstand mains failures of:

Variation 0% (=100% dip) at T-event = 50 mSec. Performance criterion B

Variation 40% (=60% dip) at T-event = 100 mSec. Performance criterion B

Variation 0% (=100% dip) at T-event = 5 Sec. Performance criterion C

Additional for USA apparatus: See 3135 019 8029 Reliability evaluation.

Variation 0% (=100% dip) at T-event = 100 mSec in standby mode. Performance criterion B

Requirement:

No misoperation and no interference of user in order to guarantee continuation of performed function.

Reference: IEC61000-4-11 For measuring method refer to UAN-D1724, as far as applicable.

Performance criterions according to IEC61000-4-4 Amendment 1

Performance Requirement

Criterion A - No any degradation of specification.

Criterion B - Temporary degradation / self recoverable.

Criterion C - No damage, resolvable hang-up.

Criterion D - Not recoverable loss of function.

4.1.4 Power Consumption

Power consumption at nominal AC input:

1. CD play mode at 1/8 P-rated output power MCM7000: 40 W

2. Low Power Standby Mode : 0.5 W

Technical Specification and Connection Facilities

1-8

traPlarenreG

Output Stage Protection: NA Temperature : Yes Short Circuit: Yes

srotacidnI

evitcAyalpsiDkcolC:rotacidnIedoMybdnatS

ffOsnruTDEL:edoMybdnatSrewoP

Electrical Data

:ecnereffiDlennahCAN:CSD 3dB

loV(muHAN:BBD min --- Volmax-20dB) 150nW

Wn04)muminiMemuloV(esioNlaudiseRY:ssaB

Bd53/Bd04zHk01/zHk1:noitarepeSlennahCY:elberT

%8.0<lamixaM,DHTY:ssenduoL

Signal to Noise Ratio(A-weighted): 82dB

:klatssorC 55dB

Audio Inputputs

Audio Input Sensitivity( 3dB) rated output power at 1kHz Audio Output(*1)

Tuner FM 67.5kHz, Modulation (Limit:-6dB) Line Out(Left/Right) NA

CD/MP3 0dB track (Audio Disc 1, Track 1) Headphone 15mW ± 2 dB, RL = 32

)SH0.2(evaweniszHK1Bd0BSU

AUX1(back) 1000mV 100mV; Rin 22k

MP3_link(front) 500mV 100mV; Rin 22k

IPOD Docking 800mV 100mV Rin 22k

Output Power(*1) At THD=10%, 1kHz sinewave MCM7000

Main Operation for / all version (rms) 30W 1dB ( At Cold Condition with 10% THD )

Tuner output power(rms) 30W 1dB ( At Cold Condition with 10% THD )

Frequency Response( 3dB) 30Hz-20kHZ

Loudspeaker(Boxes): Separable speaker box Refer to package document of Speaker Box Assy

Speaker driver Impedance: Right/Left: 4 30 Hz ~ 20kHz(-3db)

:refoowbuS

REMARKS:

Electrical Parameters are to be measured at Speaker Terminals across rated impedance Load(6ohm) with

Rated Input Signal in CD Mode setting in DBB/Loudness Off and Pre-eq at Flat unless specified otherwise.

Technical Specification and Connection Facilities

1-9

5.TUNER

FM use Silicon Lab Si4704/4705(w/RDS)

GENARAL PART

WAVE RANGE VERSION TOLERANCE TUNING GRID

FM 87.5 – 108.00 MHz /05/12 QUARTZ PRECISION 50kHz

AERIAL

FM : PIG TAIL ANT WIR(ȍ

ELECTRICAL DATA

tinUtimiLmoNMF

fBd6202tnioPgnitimiLBd3-

)edomoeretsta(ytivitisneSgninuThcraeS3541

Search time digital tuning

system. -60S

zHM7.01FI

Bd1584gniteiuQBd64-oeretS

5405muHnoitaludoM

5405oitaRN/S

Bd4-0esreveRnoitacifilpmA

%32)zHk57.veDqrF,Vm1FR(noitrotsiD

Overall Frequency Response: 63Hz –

12.5KHz -±3dB

Channel separation:400 / 1000 / 5000 Hz.

RF input: 68 dBf

26/30/

20/26/

18 dB

Frequency (MHz) Noise Limited

Sensitivity 26 dB

Image

Rejection IF Rejection Large Signal

Handling

Selectivity

S9/300 kHz

FM Nom. 18 30 64 1000 22

88.0 Lim. 22 25 45 500 18 (*1)

FM Nom. 18 30 64 1000 22

98.0 Lim. 22 25 45 500 18 (*1)

FM Nom. 18 30 60 116 dBf 45

107.0 Lim. 22 25 65 108 dBf 25

Units dBf DB dB mV/m dB

Limited(d

Normal

(dB) Remark

Susceptibility to unwanted signals(CPU,SMPS,AMP,DSP …):

-15dB -20dB Refer to selfpollution curve

Otros manuales para MCM7000/12

Tabla de contenidos

Otros manuales de Microsistema de Philips

Philips

Philips MCM 275 Manual de usuario

Philips

Philips MCM298/37 Manual de usuario

Manuales populares de Microsistema de otras marcas

JVC

JVC EX-D5 Manual de usuario

JVC

JVC EX-D1 Manual de usuario