Philips HF3671/01 Manual de usuario
Philips SleepMapper app
HF367X series
Downloaded from www.vandenborre.be
3
4
2
1
14
13
1
12
8
6
5 39
10
11
7
Downloaded from www.vandenborre.be
English
Contents
Introduction ___________________________________________________________________________________________ 6
General description____________________________________________________________________________________ 7
Intended use___________________________________________________________________________________________ 7
The effects of the connected Sleep & Wake-Up Light________________________________________________ 7
Important safety information__________________________________________________________________________ 7
Safety and compliance________________________________________________________________________________ 9
Electromagnetic fields (EMF)__________________________________________________________________________ 9
Display icons___________________________________________________________________________________________ 9
Connecting your appliance to Wi-Fi__________________________________________________________________ 10
Navigating the menu___________________________________________________________________________________ 12
Setting wake-up profiles______________________________________________________________________________ 12
PowerBackUp+________________________________________________________________________________________ 13
Snoozing_______________________________________________________________________________________________ 13
Dismissing the alarm___________________________________________________________________________________ 13
Using the appliance as a reading light________________________________________________________________ 14
Midnight light__________________________________________________________________________________________ 14
Settings_________________________________________________________________________________________________ 14
Listening to radio or your own music_________________________________________________________________ 16
Wind-down programs_________________________________________________________________________________ 17
Sunset simulation______________________________________________________________________________________ 17
RelaxBreathe___________________________________________________________________________________________ 18
Bedtime function______________________________________________________________________________________ 19
Charging your mobile phone__________________________________________________________________________ 19
Cleaning and storage__________________________________________________________________________________ 19
Recycling_______________________________________________________________________________________________ 19
Accessories and spare parts___________________________________________________________________________ 20
Troubleshooting_______________________________________________________________________________________ 20
Specifications__________________________________________________________________________________________ 23
Introduction
The Philips connected Sleep & Wake-Up Light helps you wake up more
pleasantly. If the Sunrise simulation is active (default is 30 minutes), the light
intensity of the lamp gradually increases to the set level and the light color
changes from deep morning red to bright daylight. The light gently prepares
your body for waking up at the set time. To make waking up an even more
pleasant experience, you can use natural wake-up sounds or the FM radio
to wake up to.
The light-guided breathing function, personalized sun settings, bedroom
environment tracking and several other features make this Connected Sleep
& Wake-Up Light the perfect companion for your bedroom.
Tip: Using the Philips SleepMapper app will enable extra features. Any
information about these features is explained in the app.
6English
Downloaded from www.vandenborre.be
General description
1 Deco ring
2 Lamp housing
3 Display
4 Sound pressure sensor
5 USB charging port
6 Reset button
7 Radio antenna
8 AmbiTrack sensor: Humidity and temperature sensor
9 Auxiliary (AUX) inlet
10 Adapter DC-inlet
11 Speaker
12 Snooze/Midnight Light
13 Adapter
14 Small plug
Intended use
The Philips connected Sleep & Wake-Up Light is intended to give you a
more natural and refreshed wake-up and a relaxed feeling before falling
asleep.
This is not a general illumination product.
The effects of the connected Sleep & Wake-Up
Light
The Philips connected Sleep & Wake-Up Light gently prepares your body for
waking up during the last 5 to 40 minutes of your sleep, depending on the
Sunrise simulation time you set. In the early morning hours, our eyes are
more sensitive to light than when we are awake. During this period, the
relatively low light levels of a simulated natural sunrise prepare our body for
waking up and getting alert.
People who use the connected Sleep & Wake-Up Light report waking up
more easily, have a better overall mood in the morning and feel more
energetic. Because the sensitivity to light differs per person, you can set the
light intensity of your appliance to a level that matches your light sensitivity
for an optimal start of the day. For more information about the connected
Sleep & Wake-Up Light, see www.philips.com.
Important safety information
Read this important information carefully before you use the appliance and
save it for future reference.
Danger
-Water and electricity are a dangerous combination. Do not use this
appliance in wet surroundings (e.g. in the bathroom or near a shower or
swimming pool).
7
English
Downloaded from www.vandenborre.be
-Keep the adapter dry.
-This appliance is for indoor use only.
-Do not let water run into the appliance or spill water onto the appliance.
-Do not immerse the appliance in water or rinse under the tap.
-Do not place anything close to the appliance that could cause water or
any other liquid to drip or splash onto the appliance.
-The adapter contains a transformer, which converts an unsafe
100-240Vac mains voltage to a safe 24Vdc low voltage. Do not cut off the
adapter to replace it with another plug, as this causes a hazardous
situation.
Warning
-Never use the appliance if the lamp housing is damaged, broken or
missing.
-If the adapter, cord or appliance has been damaged in any way, liquid
has spilled or objects have fallen into and/or onto the appliance, the
appliance has been exposed to rain or moisture, does not operate
normally or has been dropped or damaged, it should not be operated.
-If you feel uncomfortable at any point while using RelaxBreathe in the
breathing exercise, just go back to breathing normally.
-Only use the appliance in combination with the adapter supplied.
-If the adapter (cord) is damaged, always have it replaced with one of the
original type in order to avoid a hazard.
-This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
-Consult your doctor before you start using the appliance if you have
suffered from or are suffering from depression.
-Do not use this appliance as a means to reduce your hours of sleep. The
purpose of this appliance is to help you wake up more easily. It does not
diminish your need for sleep.
Caution
-Check if the voltage indicated on the appliance corresponds to the local
voltage before you connect the appliance.
-Protect the power cord from being walked on or pinched, particularly at
plugs, outlet and point where they exit from lamp.
-Do not use the adapter in or near wall sockets that contain an electric air
freshener to prevent irreparable damage to the adapter.
-Do not drop the appliance on the floor, hit it hard or expose it to other
heavy shocks.
-Place the appliance on a stable, level and non-slippery surface.
-Do not impair the cooling of the appliance by covering the appliance with
items such as blankets, curtains, clothes, papers, etc.
-Do not use the appliance at room temperatures lower than 5°C or higher
than 35°C.
8English
Downloaded from www.vandenborre.be
-The appliance has no on/off switch. To disconnect the appliance, remove
the plug from the wall socket. The adapter must remain easily accessible
at all times.
-This appliance is only intended for household use, including similar use
for instance in hotels.
-No naked flame sources, such as lighted candles, should be placed on
the appliance.
General
-If you often wake up too early or with a headache reduce the set light
intensity level and/or the set Sunrise Simulation time.
-If you often wake up by the alarm sound, increase the set light intensity
level or the set Sunrise Simulation time.
-If you share a bedroom with someone else, this person may
unintentionally wake up from the light of the appliance, even though this
person is further removed from the appliance. This phenomenon is the
result of differences in light sensitivity between people.
-The power consumption of the appliance is lowest if no device is
connected to the USB port and the lamp, radio, display and Wi-Fi are
turned off.
Safety and compliance
This appliance meets the safety requirements in the EU for:
-IEC 60598: Luminaires.
-IEC 62471: Photobiological safety of lamps and lamp systems.
-IEC 62368: Audio/video, information and communication technology
equipment.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
Display icons
Wake-up profile / Alarm Light intensity and light on/off
Settings Radio or your own music
Wind-down program Wi-Fi
Wi-Fi disabled Audio feedback
9
English
Downloaded from www.vandenborre.be
Display brightness Enable automatic display on
Disable automatic display off Radio
AUX inlet Sunset simulation
RelaxBreathe RelaxBreathe rythms
Light or sound guidance Start bedtime
Snooze/Midnight Light
Connecting your appliance to Wi-Fi
The firmware of your appliance might be automatically updated when you
connect to Wi-Fi. If your appliance is updated, the information in this user
manual may not be up to date. Find the latest user manual online.
Easy Wi-Fi setup
Download the Philips SleepMapper app from Google play or the App store
on your smartphone. See the information in Google play or the App store to
check if your smartphone is compatible with the app. You can easily set up
the Wi-Fi connection to your connected Sleep & Wake-Up Light.
The setup to install your Sleep & Wake-Up Light and connect to your home
Wi-Fi network only needs to be done once. This setup will take
approximately 5-10 minutes.
Setup wizard of the connected Sleep & Wake-Up Light
1When you use your connected Sleep & Wake-Up Light for the first time, a
setup wizard starts on the appliance.
2After selecting your language on the display of the appliance, continue in
the app. Make sure that you have the app open on your smartphone.
10 English
Downloaded from www.vandenborre.be
3Follow the instructions in the app to connect your appliance to the Wi-Fi
network. If you have trouble connecting your appliance, check the items
mentioned in the troubleshooting section (see 'Troubleshooting').
-If you previously chose to set up your appliance without the app, but
now want to connect your appliance to the app you press and hold the
Wi-Fi icon for 8 seconds. The access point mode icon will be shown on
the display . Open the app on your smartphone to connect.
-If you have changed your Wi-Fi home network or changed your
password, you also need to press and hold the Wi-Fi icon for 8 seconds
. You will see the access point mode icon on the display .Open the
app on your smartphone to connect.
Note: Make sure your smartphone is connected to the Wi-Fi network you
use in your bedroom.
Note: The app on your smartphone and your connected Sleep & Wake-Up
Light can ONLY communicate with each other when both appliances are
connected to the same home Wi-Fi network.
Note: You cannot remotely control the device through the app (e.g. set an
alarm) if you are not connected to your home Wi-Fi network or if your
smartphone is connected to 4G.
This Wi-Fi connection issue icon might appear on the display if a connection
cannot be established. Check the troubleshooting section to solve the
problem.
AmbiTrack sensors
The connected Sleep & Wake-Up Light collects input from its surroundings
through the AmbiTrack sensors. AmbiTrack sensors measure light, humidity,
temperature and sound pressure. These factors can influence your sleep.
Only in the app you can see information on the recommended values for
ideal sleep conditions. The measurements of the sensors can be influenced
by the surroundings of the connected Sleep & Wake-Up Light.
For example, if you place the appliance next to a window or near a heating
source such as a radiator, the temperature and humidity sensors might not
represent the temperature / humidity of the entire room.
Setting up your appliance without the app
You can set up the Sleep & Wake-Up Light without the app. Before you can
use the appliance, a setup wizard on the appliance needs to be completed
first. You can connect the appliance to the app later (see 'Easy Wi-Fi setup').
We strongly recommend you to set up your appliance with the SleepMapper
app in order to enjoy all functionalities the app offers.
11
English
Downloaded from www.vandenborre.be
1Start the setup wizard by tapping on the start icon on the display of the
appliance.
2You will be guided through the setup wizard on the appliance, where you
set the desired settings, a wake-up profile and a winddown program.
Note: The wake-up profile and the wind-down program can be set later.
Skip these settings by tapping the arrow repeatedly. However, we advise
you to set your wake-up profile and your wind-down program during this
setup. This can help you explore the different functions of the appliance.
Navigating the menu
If you have set up your appliance with the help of the SleepMapper app (see
'Easy Wi-Fi setup') or through the setup wizard (see 'Setting up your
appliance without the app') on the appliance, you will see the menu as
described in the following sections.
On the display of the appliance you can select and set the wake-up profile,
reading light, settings, sound (source) or the unwind program.
Note: All your personalized settings and profiles will be permanently stored
in the memory, they will not be erased by removing the adapter from the
electrical outlet. You can change all settings at any time, the last setting will
be stored.
Note: If the display is blank, move your hand towards the lower part of the
Sleep & Wake-up Light to show the display menu. You will see the menu
icons.
Setting wake-up profiles
In your wake-up profile on the appliance you can set the alarm time, the
maximum light intensity and type of wake-up sound you prefer. With the
SleepMapper app, you can set more wake-up profiles.
Note: The main display of the appliance shows if the alarm has been set.
To disable the alarm, press on the disable alarm icon .
Note: Press and hold the alarm icon to deactivate all set alarms at once.
Set wake-up profile
You can set 2 different wake-up profiles on the appliance. For each profile,
you can set the time, light intensity, wake-up curve duration, type of sound
and volume. With the SleepMapper app you can set 16 alarms in total, giving
you more options to choose the time and day on which the alarm should go
off.
12 English
Downloaded from www.vandenborre.be
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Equipo de iluminación de Philips
Philips
Philips GreenPower TLED InstantFit Manual de usuario
Philips
Philips 57985/**/16 Manual de usuario
Philips
Philips 57949-17-16 Manual de usuario
Philips
Philips 3222 623 87451 Manual de usuario
Philips
Philips hue Flourish Manual de usuario
Philips
Philips Stylid Evo Compact Manual de usuario
Philips
Philips 56494-31-16 Manual de usuario
Philips
Philips TT150 Guía del usuario
Philips
Philips hue Manual de usuario
Philips
Philips 57947-17-16 Manual de usuario
Philips
Philips BN012C Guía del usuario
Philips
Philips HUE GO Manual de usuario
Philips
Philips PLFRESNEL1 Manual de usuario
Philips
Philips VU6 Instrucciones de instalación
Philips
Philips Ledalite Centris Wall Mount Joint 950 Manual de usuario
Philips
Philips GreenPower LED production module DR/B Manual de usuario
Philips
Philips EssentialWhite MR16 Manual de usuario
Philips
Philips VL440 Spot Manual de usuario
Philips
Philips hue 24 po Manual de usuario
Philips
Philips TrueLine RC530B ELP3 Manual de usuario
Manuales populares de Equipo de iluminación de otras marcas
Qazqa
Qazqa Suplux SL 3 Black 103062 Manual de usuario
Commercial Electric
Commercial Electric 54568141 Manual de usuario
CREE LIGHTING
CREE LIGHTING 304 Series Manual de usuario
Goobay
Goobay 49867 Manual de usuario
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manual de usuario
Alkalite
Alkalite Krypton KT-81 Manual de usuario
