Philips MCD139B/05 Manual de usuario
MCD139B
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
1
4
7
2
5
8
0
3
6
9
PROG
GOTO
VOL
+
ZOOM
DSC
DBB
SUBTIT LE
1
Quick Start Guide
2
Composite Video Cable DIN cable Remote control with one
CR2025 battery loaded
FM wire antenna Quick start guide User manual
MCD139B QSG_12_Eng 2007.5.23, 15:581
Important!
–This set can only be operated after the
supplied DIN cable has been connected.
Tips
–For connecting to a Progressive Scan
TV, refer to the user manual for proper
connections and detailed setup.
1
3
4
5
Connect the speaker wires of the right speaker and subwoofer to the
left speaker.
Connect the left speaker and the DVD player by using the supplied
DIN cable.
Connect the DVD player to your TV using the supplied composite video
cable.
Connect the VCR or cable/satellite box to the TV system. Connect AUX
IN 1 jacks to the AUDIO OUT jacks on theVCR or cable/satellite box.
2
Connect the supplied FM wire antenna.
Setting up the TV
Press SOURCE on the set (or DISC on the remote) to select disc source.
Turn on the TV and set it to the correct Video In channel.
1
2
ATo listen to TV channels through this system, use the
audio cable (white/red, not supplied) to connect
AUX IN 1 (L/R) jacks to the corresponding AUDIO
OUT jacks on the TV set.
BTo listen to TV channels through this system, use the
audio cable (white/red, not supplied) to connect
AUX IN 1 (L/R) jacks to the HEADPHONE jack on
the TV set.
●Before starting operation, press AUX1/2/TV on
the remote control to select “AUX 1” to activate
the input source.
●See the User Manual for other TV connection options.
AC Power Cord
8
6
6
Connect the AC power cord to the wall socket.
OUT
IN
MCD139B QSG_12_Eng 2007.5.23, 15:582
Tip
See chapters "Getting Started" and "DVD menu operations" in the
User Manual for detailed descriptions.
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connectedTV does not support
progressive signals or the video cables are not connected accordingly, see the user
manual for proper progressive scan setup or deactivate the progressive scan
feature as below:
1)Turn off your TV progressive scan mode then turn on to interlaced mode.
2) Select “OFF” in PROGRESSIVE menu of the system setup menu to turn off
progressive scan, then press SYSTEM MENU on the remote to exit the system
menu.
Or To turn off progressive scan, you may also first press OPEN/CLOSE open the
disc door, then press
1
on the remote control, and press AUDIO on the remote.
Setting the clock
1
2
3
4
ETUMOIDU
+
In standby or any source mode, press and hold CLOCK on the remote control.
The clock digits will be lighted on the display.
Press ¡/ ™on the set repeatedly to set the hours.
Press à/ áon the set repeatedly to set the minutes.
I
VOL
+
Press CLOCK again to store the setting.
PHILIPS PHILIPS
PHILIPS
MCD139B QSG_12_Eng 2007.5.23, 15:583
Playing a disc
1
2
3
4
Push OPEN /CLOSEçto open the disc door.
Load in a disc with the label side facing up, then close the disc door.
Playback will start automatically. If not, pressÉÅ.
To stop playback, press 9.
PDCC-JS/JW-0719
CRoyal Philips Electronics N.V. 2007
All rights reserved.
http://www.philips.com
Tip
Detailed playback features and
additional functions are described in the
accompanied user manual.
Programming and tuning to radio stations
1
2
3
Press SOURCE (or TUNER on the remote) to select tuner source (FM).
Press and hold PROG on the set (or on the remote control) until “ START ” appears on
the display panel. The system starts to program all available stations in order of waveband.
Press ¡/ ™until the desired preset station is displayed.
To s witch on the system,
press STANDBY ONBor
SOURCE on the set, or
DISC,AUX1/2/TV or
TUNER on the remote.
Notes for the remote control:
–First, select the source you wish to
control by pressing one of the source
select keys on the remote control
(DISC or AUX1/2/TV, for example).
–Then select the desired function
(2;, í, ëfor example).
TUNING
MCD139B QSG_12_Eng 2007.5.23, 15:584
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Sistema de cine en casa de Philips
Philips
Philips MCD 728 Manual de usuario
Philips
Philips HTS3548W/93 Manual de usuario
Philips
Philips HTS6500 - DivX Ultra Home Theater System Manual de usuario
Philips
Philips MCD759 Manual de usuario
Philips
Philips HTS6500/98 Manual de usuario
Philips
Philips MX2500 Manual de usuario
Philips
Philips MCD802/98 Manual de usuario
Philips
Philips LSBS3700/00 Manual de usuario
Philips
Philips HTS3541 Manual de usuario
Philips
Philips MCD137/93 Manual de usuario
Philips
Philips Immersive 3000 series Manual de usuario
Philips
Philips HTS3276/98 Manual de usuario
Philips
Philips HTS8150/12 Manual de usuario
Philips
Philips LX3900SA/05 Manual de usuario
Philips
Philips HTS3180 Manual de usuario
Philips
Philips HTS6520 Manual de usuario
Philips
Philips HTS3455/51 Manual de usuario
Philips
Philips HTS3371D Manual de usuario
Philips
Philips HTS7140/12 Manual de usuario
Philips
Philips HTS3568 Manual de usuario
