Philips TAT3215 Manual de usuario

User manual

www.philips.com/support

3000 Series

TAT3215

TAT3255

Headphones

1 Important safety instructions 2

Hearing Safety 2

General information 2

2 Your Bluetooth wireless

3tesdaeh

What's in the box 3

Other devices 3

Overview of your Bluetooth

wireless headset 4

3 Get started 5

Charge the battery 5

Pair the headset with your

Bluetooth device at the Ėrst

6emit

Pair the headset with another

Bluetooth device 6

4 Use your headset 7

Reconnect the headset to your

Bluetooth device 7

Manage your calls and music 7

LED indicator status 8

How to wear 8

5 Factory reset the headset 9

6 Technical data 10

11ecitoN7

Declaration of conformity 11

Disposal of your old product

and battery 11

Compliance with EMF 12

Environmental information 12

Notice of complianc 12

8 Frequently asked questions 13

Contents

1 Important

safety instruc-

tions

Hearing Safety

Danger

•To avoid hearing damage, limit the time you

use headset at high volume and set the

volume to a safe level. The louder the

volume the shorter the safe listening time is.

Be sure to observe the following

guidelines when using your

headset.

• Listen at reasonable volumes for

reasonable periods of time.

•

Be careful not to adjust the volume

continuously upwards as your hearing

adapts.

• Do not turn up the volume so high

that you can't hear what's around

you.

• You should use caution or

temporarily discontinue use in

potentially hazardous situations.

• Excessive sound pressure from

earphones and headset can cause

hearing loss.

• Using headset with both ears

covered while driving is not

recommended and may be illegal in

some areas while driving.

• For your safety, avoid distractions

from music or phone calls while in

environments.

General information

To avoid damage or malfunction:

Caution

• Do not expose headset to excessive

heat.

• Do not drop your headset.

• Headset shall not be exposed to

dripping or splashing.

• Do not allow your headset to be

submerged in water.

• Do not use any cleaning agents

containing alcohol, ammonia, benzene,

or abrasives.

• If cleaning is required use a soft cloth, if

necessary dampened with a minimum

amount of water or diluted mild soap, to

clean the product.

• The integrated battery shall not be

exposed to excessive heat such as

• Danger of explosion if battery is

incorrectly replaced. Replace only with

the same or equivalent type.

About operating and storage

temperatures and humidity

•

The storage temperature is between

-10°C to 65 °C. The operation

temperature is 45°C (max.) (up to

90% relative humidity).

• Battery life may be shorter in high

or low temperature conditions.

2 Your Bluetooth

wireless

headset

What's in the box

Philips True Wireless headset

Philips TAT3215, TAT3255

Replaceable rubber ear caps x 2 pairs

Charging case

Quick start guide

Other devices

A mobile phone or device (e.g. note-

book, Bluetooth adapters, MP3 players

etc) which supports Bluetooth and is

compatible to the headset (see 'Tech-

nical data" on page 10).

Congratulations on your purchase, and

welcome to Philips! To fully beneĖt from the

product at www.philips. com/welcome.

With this Philips wireless headset, you can:

•enjoy convenient wireless handsfree

calls;

•

enjoy and control wireless music；

•

switch between calls and music.

USB Type-C charging cable (for

charging only)

Overview of your

Bluetooth wireless

headset

1. Microphone

2. Multi-function buttons

3. LED indicator (headset)

4. USB-C charging slot

5. LED indicator (charging case)

3 Get started

Charge the battery

Charging case

Headset

Note

•

place the headsets in the charging case and

charge the battery for 3 hours for optimum

battery capacity and lifetime.

•Use only the original USB charging cable to

avoid any damage.

•Finish your call before charging the headset,

as connecting the headset for charging will

Connect one end of the USB cable into

the charging case, and another end into

the power source.

• Charging process is veriĖed by the

blue LED light on the front panel.

• When the charging case is fully

charged, the blue light goes on.

• Charging process is veriĖed by

white LED lights on the earpieces.

• When the headset is fully charged,

Tip

•

The charging case serves as a portable backup

battery for charging the headset. When the

charging case is fully charged, it supports 3 full

recharge cycle for the headset.

•Normally, a full charge takes 2 hours (for the

headset or charging case).

Pair the headset with

your Bluetooth device at

the Ėrst time

Place the headset in the charging case.

The headset start charging.

Make sure that the headset is fully

charged.

Take both headsets from the

charging case, the headset will

power on automatically, entering

pairing model and Right & Left

headset connected.

here will be a voice "Power on" and a

voice "Pairing". Then, there will be a

voice" Right channel"on right headset

and "Left Channel"on left headset

after paring each other.

The charging case starts charging.

If you have another Bluetooth device

that you want to pair with the headset

make sure the Bluetooth function in any

other previously paired or connected

steps in 'Pair the headset with your

Bluetooth device at the Ėrst time'. 'Pair

the headset with your Bluetooth device

at the Ėrst time'.

Note

•Only Turn the "Left headset channel power on,

it cannot connect to Bluetooth device, need to

turn on "Right Channel" to pair each other.

•Only Turn the "Left headset channel power on,

it cannot connect to Bluetooth device, need to

turn on "Right Channel" to pair each other.

•

The headset stores 1 device in the memory. If you

try to pair more than 2 devices the earliest

paired device is replaced by the new one.

Single headset pairing

(Mono mode)

Pair the headset with

another Bluetooth device

In right headset, it has voice

"Pairing" and LED Ęashes in

white and blue.

The headset is now in pairing

mode and is ready to pair with a

Bluetooth device (e.g. a mobile

phone).

In right headset, it has voice

"Connected" and LED stays on

for 5 seconds on both headsets.

You can use your device to play

music or make a call.

Turn on the Bluetooth function

of your Bluetooth device, select

Philips TAT3215, TAT3255

Enter the headset password

“0000” (4 zeros) if prompted.

For those Bluetooth devices

featuring Bluetooth 3.0 or higher,

no need to enter a password.

Turn on the Bluetooth function of

your Bluetooth device.

Take the right headset ("Master

device" ) from the charging case, the

earpiece will power on automatically.

There will be a voice "Power on" from

right headset.

Turn on the Bluetooth function on

your device, search for “Philips

TAT3215, TAT3255” tap to connect.

( Please refer to P.6 )

Once the pairing succeed, you will

hear a voice" connected" And the

Pair the headset with your

Bluetooth device. Refer to the user

manual of your Bluetooth device.

The following example shows you

how to pair the headset with your

Bluetooth device.

TAT3215

TAT3255

TAT3215, TAT3255

Tip

Note

•

The headset cannot connect to more than 1

device at the same time. If you have two paired

Bluetooth devices, only turn on the Bluetooth

function of the device that you want to connect.

•

If you turn on the Bluetooth function of your

Bluetooth device after turning on the headset,

you have to go to the Bluetooth menu of the

device and connect the headset to the device

manually

•

If the headset fails to connect to any Bluetooth

automatically to save the battery life.

•

In some Bluetooth devices, connection may not

be automatic. In this case, you have to go to the

Bluetooth menu of your device and connect the

headset to the Bluetooth device manually.

If no device is connected, the

headset will automatically

Both headsets are now

powered on and are paired

with each other automatically.

The headset will search the last

connected Bluetooth device and

reconnect to it automatically.

If the last connected one is

not available, the headset will

search and reconnect to the

second last connected device.

4 Use your

headset

Turn on the Bluetooth function of

your Bluetooth device.

Task

Music control

Turn the

headset on.

Headsets

Right/Left

headset

Take both

headsets

from the

charging

case.

Place both

headsets in

charging

case.

Press and

hold for 5

seconds.

The

white

LED

Ęashes

3 times.

Turn the

Play or

pause music.

Skip forward. Right

headset

Press and

hold 2

seconds.

Skip

backward. Left

headset

Press and

hold 2

seconds.

Right/Left

headset

Press once.

Take both headsets from the

charging case, the headset will

power on and reconnect

automatically.

Reconnect the headset to

your Bluetooth device

Manage your calls and

music

Multi-

function

button

Operation

Task Multi-

function

button

Operation

LED indicator status

Battery LED indicator on

headset status

Call control

Pick up/hang

up a call.

Reject an

incoming

call.

Right/Left

headset

Press and

hold for 2

seconds.

Switch caller

during a call.

Right/Left

headset

Right/Left

headset Press twice

Siri/Google

The headset is

connected to a

Bluetooth device.

The headset is

powered on.

The headset is

in pairing mode.

The headset

is on but not

connected to a

Bluetooth device.

The blue and white

LED will Ęashes.

If no connection

can be made, the

headset will turn

minutes.

The white LED

Ęashes 2 times.

The blue and

white LED Ęashes.

Low battery level

(headset).

Battery is fully

charged

You will hear

'battery low' on

the headset.

The white LED

Ęash twice for

every 3 min

The white LED

light stays on for 5

seconds.

Press and

hold for 2

seconds.

Right/Left

headset

Press once.

Task Multi-

function

button

Operation

Voice control

Task

Headset status Indicator

Multi-

function

button

Operation It will show a battery indicator on

Bluetooth device after connected to

headset.

While charging headset, Blue LED will

light on

4 blue LED lights stay on for 75-100% power

3 blue LED lights stay on for 50-75% power

2 blue LED lights stay on for 25-50% power

1 blue LED lights stay on for 0-25% power

Battery LED indicator on

Charging case

5 Factory reset

the headset

How to wear

While charging headset, Blue LED

status as below:

If you encounter any pairing or connection

issue, you can follow the following

procedure to factory reset

your headset.

On your Bluetooth device, go to the

Bluetooth menu and remove Philips

TAT3215 from the device list.

Put both headset back to charging

case. Hold and press left & right

headsets function button for 5

seconds.

To pair the headset with a Bluetooth-

device, turn on the Bluetooth function

of your Bluetooth device, select

Philips TAT3215, TAT3255.

4 blue LED stay on for 70-100% power

2 blue LED stay on and 3rd LED Ęashes

every second for 50-75% power

1 blue LED stays on and 2nd LED Ęash-

es every second for 25-50% power

1 blue LED Ęashes every second for

0-25% power

Bluetooth device.

Take both headsets from the charging

case, the headset will power on

automatically.

There will be a voice "Power on" and a

voice " Pairing".

Then, there will be a voice" Right

channel" on right headset and

"Left Channel" on left headset after

paring each other. The LED on Right

headset Ęashes in white and blue

for 3 mins.

There will be a voice "Connected"

from Right Channel.

Then, the right headset LED

earpiece Ęashes in white and blue

for 3 mins.

Battery LED indicator

on Charging case with

USB Type-C cable

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Auriculares de Philips

Philips

Philips 1000 Series Manual de usuario

Philips

Philips SHN2600 Manual de usuario

Philips

Philips SBCHP890 Manual de usuario

Philips

Philips SHS420 Manual de usuario

Philips

Philips 2000 series Manual de usuario

Philips

Philips HS380 series Manual de usuario

Philips

Philips SHE3624 Manual de usuario

Philips

Philips HC650 Manual de usuario

Philips

Philips 8000 Series Manual de usuario

Philips

Philips SHS850 Manual de usuario

Philips

Philips SBCHC300/00 Manual de usuario

Philips

Philips SHE2646 Manual de usuario

Philips

Philips Swarovski SPACE SWS4200/00 Manual de usuario

Philips

Philips SHC5100 Manual de usuario

Philips

Philips SBCHC8430/05 Guía de configuración

Philips

Philips SBCHE240/00 Manual de usuario

Philips

Philips Push SHB3075 Manual de usuario

Philips

Philips SHC1300/ Series Manual de usuario

Philips

Philips SHN2600/10 Manual de usuario

Philips

Philips SHH9700 Manual de usuario

Philips

Philips SHL3750NC Manual de usuario

Philips

Philips SHN9500 Manual de usuario

Philips

Philips Fidelio L4 Manual de usuario

Philips

Philips Nike Sport Motion SHJ047 Manual de usuario

Manuales populares de Auriculares de otras marcas

Sony

Sony MDR-NC8 Manual de usuario

AUSounds

AUSounds AU-Stream Manual de usuario

ENERGY SISTEM

ENERGY SISTEM Style 7 Manual de usuario

Insignia

Insignia NS-CAHBTSPORT Manual de usuario

Movie Vision

Movie Vision HP-400 Manual de usuario

MobiFren

MobiFren SM Pro Manual de usuario

Motorola solutions

Motorola solutions PMLN8120 Manual de usuario

Jaybird

Jaybird freedom Guía de instalación

Sony

Sony MDR-ED12LP Manual de usuario

HiFuture

HiFuture Tidy Buds Pro Manual de usuario

Creative

Creative CB2530 Manual de usuario

Renkforce

Renkforce RF FTVK-100 Manual de usuario

Sennheiser

Sennheiser 500371 Manual de usuario

Califone

Califone 2924AV Manual de usuario

Technics

Technics EAH-AZ80 Manual de usuario

Bose

Bose On-Ear Headphone Manual de uso y mantenimiento

Aluratek

Aluratek ABH02F Manual de usuario

Waterfi

Waterfi swimQ Manual de usuario