Philips QT4040 Philishave Manual de usuario
QT4080
QT4060
QT4040
2
3
A
B
C
D
E
F
G
H
I
I
J
K
L
1
4
ENGLISH 6
DEUTSCH 16
FRANÇAIS 26
NEDERLANDS 36
ESPAÑOL 46
ITALIANO 56
PORTUGUÊS 66
76
TÜRKÇE 87
QT4080, QT4060, QT4040
Introduction
Dear customer, you have made the right choice!
Your new maintenance-free Philips vacuum beard trimmer combines
innovative technology and outstanding comfort of use.
The integrated vacuum mechanism absorbs cut-off hairs during use and
guarantees a clean washbasin after use.
The contour-following comb, the self-sharpening cutting element and
the adjustment ring for selecting hair lengths of 1.5 to 18 mm ensure
excellent cutting results and time-saving operation.The high-quality
precision trimmer guarantees a precise and defined cut and the
ergonomic shape of the appliance allows pleasant and comfortable
handling.
Your new Philips vacuum beard trimmer is excellently suited for cutting
and contouring your beard and sideburns.
General description (fig. 1)
Acomb attachment
Bdetachable cutting unit
Cflexible hair guide
Dhair-collection chamber
Efilter
Fadjustment ring (Precision Zoom Lock`)
Gon/off button
Hcharging & battery capacity lights
Isocket for appliance plug
Jpowerplug
Kcleaning brush
Lprecision trimmer (QT4080 only)
Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
◗Make sure that the appliance, the cord and the powerplug do not
get wet.
ENGLISH6
◗Check if the voltage indicated on the powerplug corresponds to
the local mains voltage before you connect the appliance.
◗Only use the powerplug supplied.
◗Keep the appliance out of the reach of children.
◗Charge, use and store the appliance at a temperature between
15cC and 35cC.
◗This appliance is only designed for trimming the human beard. Do
not use the appliance for any other purpose.
◗Do not use the appliance if the cutting unit is damaged or
broken, as this may cause injury.
◗If the powerplug is damaged, always have it replaced by one of the
original type in order to avoid a hazard.
Charging
Charge the appliance fully before you start using it for the first time or
after a long period of disuse.
Charge indications (QT4080 only)
Battery running low
◗When the battery capacity drops below its minimum level, the
red battery-low light starts blinking when you switch the trimmer
on or during trimming to indicate that the appliance needs to be
charged (fig. 2).
BWhen this happens, there is still enough energy in the battery for one
more trimming session.When the battery is completely empty, neither
the motor nor the lights will go on. In this case you can run the
appliance from the mains.
Charging
◗When you start charging, the green light starts blinking (fig. 3).
◗During charging the blinking green light indicates the level at
which the battery is currently charging.The battery capacity that
is already available is indicated by the green battery lights that
burn continuously (fig. 4).
ENGLISH 7
Battery fully charged
When the battery is fully charged, the bottom three green lights burn
continuously and the top green light blinks at a very high frequency.
Battery capacity indication
Your Philips beard trimmer is equipped with a battery capacity
indication.This indication becomes visible for 5 seconds every time the
appliance is switched on or off.The number of burning green lights
indicates the amount of battery capacity that is available.
Charging the appliance
BQT4080/QT4060 only:The appliance can also be run directly from the
mains (see chapter 'Using the appliance', section 'Corded trimming').
Charge the appliance fully before you start using it for the first time or
after a long period of disuse.
1Make sure the appliance is switched off before you start charging
it.
2Insert the appliance plug into the appliance and put the
powerplug in the wall socket.
QT4080 only:
◗It will take approx. 1 hour to fully charge the battery if it is
completely empty. If there is still battery capacity available, fully
charging the battery will take less time.
◗A fully charged appliance has a cordless trimming time of up to
50 minutes.
QT4060/QT4040 only:
◗The charging light goes on to indicate that the appliance is
charging (fig. 5).
The charging light will not go out when the battery is fully charged.
◗It will take approx. 10 hours to fully charge the battery if it is
completely empty. If there is still battery capacity available, fully
charging the battery will take less time.
ENGLISH8
◗A fully charged appliance has a cordless trimming time of up to
50 minutes.
◗For a single trimming session the appliance must be charged for
at least 90 minutes.
Optimising the lifetime of the rechargeable battery
- After the appliance has been charged for the first time, use it until
the battery is completely empty.
- Do not charge the appliance for more than 24 hours.
- Do not keep the powerplug plugged into the wall socket all the
time.
- Do not recharge the appliance between trimming sessions.
- Discharge the battery completely twice a year by letting the motor
run until it stops.Then fully recharge the battery.
- If the appliance has not been used for a long period of time, it must
be fully recharged.
Preparing for use
Always comb your beard or moustache with a fine comb before you
start trimming.
Using the appliance
Corded trimming (QT4080/QT4060 only)
Do not run the appliance from the mains when the battery is fully
charged.
BIf the battery is low, you can also use the appliance from the mains:
1Switch the trimmer off, connect it to the mains and wait a few
seconds before switching it on.
2If the battery is completely empty, wait a few minutes before
switching the appliance on.
ENGLISH 9
Absorbing cut hairs
The suction system is activated automatically as soon as you switch the
appliance on. It absorbs cut hairs during every kind of use, i.e. trimming
with and without comb attachment and contouring.The flexible hair
guide follows the contours of the face and directs cut hairs towards the
nozzle of the vacuum mechanism.
We advise you to empty the hair-collection chamber after each
trimming session.When trimming long, dense beards it may also be
necessary to empty the hair-collection chamber during the trimming
session in order to maintain optimal suction performance (also see
chapter 'Cleaning', section 'Hair-collection chamber').
BTo ensure optimal functioning of the vacuum system, do not cut off
more than approx. 7mm of your overall beard length at a time. If you
want to cut your beard shorter, repeat the process one or more times.
Trimming with comb attachment
1Turn the adjustment ring (Precision Zoom Lock`) to the desired
trimming length setting (see table) (fig. 6).
◗The setting will appear in the window below the adjustment ring
(Precision Zoom Lock`).
If you are trimming for the first time, start with the maximum
trimming length setting (9).
2To trim in the most effective way, move the trimmer against the
direction of hair growth. Do not move the trimmer too fast.
Make smooth and gentle movements and make sure the surface
of the comb always stays in contact with the skin (fig. 7).
ENGLISH10
Otros manuales para QT4040 Philishave
1
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Idiomas:
Otros manuales de Cortapelos de Philips
Philips
Philips QC5560 Manual de funcionamiento
Philips
Philips BRT381 Manual de usuario
Philips
Philips HC7460 Manual de usuario
Philips
Philips QG3340 Manual de usuario
Philips
Philips T800 Manual de usuario
Philips
Philips HC5450/83 Manual de usuario
Philips
Philips HC9490 Manual de usuario
Philips
Philips AC3259 Manual de usuario
Philips
Philips QC5090 Manual de usuario
Philips
Philips HC5440/80 Manual de usuario
Philips
Philips QT4045 Manual de usuario
Philips
Philips HC3420 Manual de usuario
Philips
Philips QC5530 Manual de usuario
Philips
Philips HC5100 Manual de usuario
Philips
Philips QC5170/60 Manual de usuario
Philips
Philips HQ-C485 Manual de usuario
Philips
Philips Essence 5000 Series Manual de usuario
Philips
Philips BT9295 Manual de usuario
Philips
Philips QC5570 Manual de usuario
Philips
Philips QC5530/40 Manual de usuario
