Philips DS3120 Manual de usuario

www.philips.com/welcome

DS3120

EN User manual

2EN

Contents

1 Important 3

2 Your Docking Speaker 4

Introduction 4

What’s in the box 4

Overview of the main unit 4

3 Get started 5

Connect power 5

Turn on 6

4 Play 6

Play from iPod/iPhone 6

Play from an external device 8

Adjust volume 9

  

 

General information 9

6 Troubleshooting 10

7 Notice 10

3EN

1 Important

 Read these instructions.

 Heed all warnings.

 Follow all instructions.

 Do not use this apparatus near water.

 Do not block any ventilation openings.

Install in accordance with the

manufacturer’s instructions.

 Do not install near any heat sources such

as radiators, heat registers, stoves, or



produce heat.

 Protect the power cord from being

walked on or pinched, particularly at plugs,

convenience receptacles, and the point

where they exit from the apparatus.

 

by the manufacturer.

 Unplug this apparatus during lightning

storms or when unused for long periods

of time.

 

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

 The battery shall not be exposed to



like.

 Apparatus shall not be exposed to

dripping or splashing.

 Do not place any sources of danger on the





 The USB socket is for data transmission

only.

 Where the plug of the Direct Plug-in

Adapter is used as the disconnect device,

the disconnect device shall remain readily

operable.

Warning

 Never remove the casing of this apparatus.

 Never place this apparatus on other electrical

equipment.

 Ensure that you always have easy access to the power

cord, plug or adaptor to disconnect the apparatus from

the power.

Always bring your product to a professional to

remove the built-in battery.

4EN

2 Your Docking

Speaker

Congratulations on your purchase, and



support that Philips offers, register your product

at www.philips.com/welcome.

Introduction

With this docking speaker, you can

 enjoy audio from the iPod/iPhone, and

other external audio devices; and

 synchronize the iPod/iPhone with your

computer through USB socket.

What’s in the box

Check and identify the contents of your

package:

 Main unit

 AC power adaptor

 Quick start guide

Overview of the main unit

a Dock for the iPod/iPhone

b /

 Adjust volume.

 As LED indicators, show system status.

 Turn the docking speaker on or off.

d Power supply socket

 Connect AC power.

 Connect a computer with a USB cable.

f MP3-LINK

 Connect an external audio device.

5EN

3 Get started

Always follow the instructions in this chapter in

sequence.

Connect power

Caution

 Risk of product damage! Make sure that the power

supply voltage matches the voltage printed on the

bottom of the unit.

 Risk of electric shock! When you unplug the AC

adaptor, always pull the plug from the socket. Never

pull the cord.

Note

 The type plate is located at the back of the unit.

Connect the AC power adaptor to:

 the power socket at the back of the

docking speaker.

 the wall socket.

Built-in Battery

Caution

 Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

The docking speaker can also operate on the

built-in rechargeable battery.

Battery power LED indicator

Low Flashing

Full Steadily on

Empty Off

To recharge the built-in battery:

 Connect the docking speaker to the power

supply.

» In standby mode, the LED indicators

are off.

Note

 Use the supplied AC adapter only to charge the

battery.

6EN

Turn on

Press to turn the docking speaker on.

» The / LED indicators light up.

Switch to standby mode

The docking speaker switches to standby mode

in the following situation:

 Press again;

 In AC power supply, the speaker is idle for

15 minutes; or

 In battery power supply, the iPod/iPhone

or external audio device is disconnected

from the speaker.

» In standby mode, the / LED indicators

are off.

4 Play

Play from iPod/iPhone

You can enjoy audio from your iPod/iPhone

through this docking speaker.

Compatible iPod/iPhone

The docking speaker supports the following

iPod and iPhone models:

Made for.

 iPod touch (1st, 2nd, 3rd, and 4th



 iPod classic

 iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th



 iPhone 4S

 iPhone 4

 iPhone 3GS

 iPhone 3G

 iPhone

Listen to the iPod/iPhone

To enjoy more features, you are recommended

to install the free DockStudio app.

1 Press to turn the docking speaker on.

» The LED indicators light up.

2 Insert the iPod/iPhone into the dock.

7EN

3 

install DockStudio app on your iPod/

iPhone.

4 Tap [Yes] 

request.

5 Follow the on-screen instructions to

complete the installation.

6 Launch the app after the installation.

7 Play audio on your iPod/iPhone.

» Audio comes out through this docking

speaker.

Note

 With the DockStudio app, you can enjoy music, set

clock and alarm, adjust sound settings, and update





DockStudio

app will search for it automatically and ask you

to download it.

Note

 Make sure that your iPod/iPhone is inserted in the

docking speaker and connected to the Internet.

1 OK.

2 Follow the on-screen instructions to



8EN

Note

 Do not disconnect power or undock the iPod/iPhone

during the updating process.

Charge the iPod/iPhone

Note

 If the docking speaker is operated on the batteries, you

cannot charge your iPod/iPhone.

When the docking speaker is connected to

AC power, the docked iPod/iPhone begins to

charge.

Tip

 For certain iPod models, it may take up to a minute

before the charging indication appears.

Sync iPod/iPhone with PC

Note

 

in your PC.

1 Insert the iPod/iPhone in the dock.

2 Press to switch to standby mode.

» The LED indicators light off.

3 Connect your docking speaker and PC

with a USB cable.

4 Launch iTunes to synchronize your docking

speaker with PC.

» The docked iPod/iPhone is

synchronized with PC successfully

through the iTunes.

Note

 Due to different materials and product techniques,

some USB cables may not work with this device.

Play from an external device

With this docking speaker, you can also enjoy

audio from an external device such as an MP3

player.

Note

 Make sure that no iPod/iPhone is docked in the speaker.

1 Press to turn the docking speaker on.

2 

to:

 the MP3-LINK socket at the back of

the docking speaker.

 the headphone socket on an external

device.

» The docking speaker switches to MP3

link mode automatically.

3 Play audio on the device (see the device’s



9EN

Adjust volume

To adjust volume:

 Press +/- on your docking speaker; or

 Adjust the volume control of your iPod/

iPhone or external device.

Tip

 If the docking speaker is powered by batteries, the

volume is lower than that by AC supply.

5 Specifications

Note

 Product information is subject to change without prior

notice.



Rated Output Power 2 X 5 W RMS

General information

Power supply

- AC Power

- Battery

Model: AS190-090-



Input: 100-240 V ~,

50/60Hz, 0.7A;

Output: 9 V 1.9 A

Li-ion battery

Operation Power

Consumption

<10 W

Standby Power

Consumption

<0.5 W

Max. load for iPod/

iPhone

5 V 1 A

Dimensions

- Main Unit



224 x 162 x 120 mm

Weight

- Main Unit

- With Packing

1.1 kg

1.6 kg

10EN

6 Troubleshooting

Warning

 Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair

the system yourself.

If you encounter problems when using this

apparatus, check the following points before

requesting service. If the problem remains

unsolved, go to the Philips web site



Philips, ensure that the apparatus is nearby

and the model number and serial number are

available.

No power

Make sure that the AC power adaptor of

the device is connected properly.

Make sure that there is power at the AC

outlet.

No sound or poor sound

Adjust the volume of your docking speaker.

Adjust the volume of your iPod/iPhone or

external audio device.

No response from the unit

Disconnect and reconnect the AC power

plug, and then switch on the device again.

Cannot sync with PC

Switch the docking speaker to standby

mode.

Try another USB cable.

Install iTunes in PC properly.

7 Notice



device that are not expressly approved by

Philips Consumer Lifestyle may void the user’s

authority to operate the equipment.

“Made for iPod” and “Made for iPhone”

mean that an electronic accessory has been





the developer to meet Apple performance

standards. Apple is not responsible for the

operation of this device or its compliance with

safety and regulatory standards. Please note that

the use of this accessory with iPod or iPhone

may affect wireless performance.

iPod and iPhone are trademarks of Apple Inc.,

registered in the U.S. and other countries.

This product complies with the radio

interference requirements of the European

Community.

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

When this crossed-out wheeled bin symbol is

attached to a product it means that the product

Otros manuales para DS3120

Tabla de contenidos

Otros manuales de Altavoces de acoplamiento de Philips

Philips

Philips AS351/12 Manual de usuario

Philips

Philips DS9000 Manual de usuario

Philips

Philips AD420 Manual de usuario

Philips

Philips DS6600/37 Manual de usuario

Philips

Philips DS8530/37 Manual de usuario

Philips

Philips DS3510/98 Manual de usuario

Philips

Philips DS7700/98 Manual de usuario

Philips

Philips AD752 Manual de usuario

Philips

Philips Fidelio Primo DS9 Manual de usuario

Philips

Philips DS 3100 Manual de usuario

Philips

Philips DS8550/10 Manual de usuario

Philips

Philips AD305 Manual de usuario

Philips

Philips DTM9030 Manual de usuario

Philips

Philips AS141/12 Manual de usuario

Philips

Philips DS 3100 Manual de usuario

Philips

Philips DS7880/37 Manual de usuario

Philips

Philips DS9800W/37 Manual de usuario

Philips

Philips DS3020/05 Manual de usuario

Philips

Philips DS-700 Manual de operación y mantenimiento

Philips

Philips DS7550/93 Manual de usuario

Philips

Philips DS8550 Manual de usuario

Philips

Philips DS7510/93 Manual de usuario

Philips

Philips DS3110/05 Manual de usuario

Philips

Philips AS111/12 Manual de usuario

Manuales populares de Altavoces de acoplamiento de otras marcas

LG PA36 Manual de usuario

PURE

PURE Contour Manual de usuario

LG ND8520 Manual de usuario

Maxell

Maxell BT3100 Manual de usuario

Boston

Boston i-DS3 plus Manual de usuario

aqprox!

aqprox! APPSP06X Manual de usuario

iLive

iLive ISD291B Manual de usuario

JBL

JBL on stager III WM Manual de usuario

JAMO

JAMO i200 FM Manual de usuario

AUVIO

AUVIO Auvio 40-294 Manual de usuario

Insignia

Insignia NS-IPSD1 Guía de inicio rápido

Pioneer

Pioneer XW-NAS3 Manual de usuario

Amethyst

Amethyst A9 iExecutive Manual de usuario

Memorex

Memorex Mi2032 - Portable Speakers With Digital Player... Manual de usuario

Dok

Dok CR11 Manual de usuario

LENCO

LENCO IPD-4100/2 Series Manual de usuario

LG ND5520 Manual de usuario

Boston

Boston i-DS3 plus Manual de usuario