Philips AZ2020 Manual de usuario

CD Radio Cassette Recorder AZ 2025

AZ 2020

SHUFFLE

REPEAT

STOP

VOLUME

SHUFFLE

REPEAT

STOP

VOLUME

igital

emote

ontrol

igital

emote

ontrol

BATT

LOW

23 54 61 7 8

%#@!09 ^&$

SHUFFLE

REPEAT

TUNING

PRESET

STOP

VOLUME

igital

emote

ontrol

(

)

(for AZ 2025 model only)

CONTROLS

TOP AND FRONT PANELS

1p- 3.5 mm stereo headphone socket

Note: Connecting headphones will switch off

the speakers.

2DIGITAL DYNAMIC BASS BOOST -

selects a more vivid bass response

3ULTRA HIGH CLARITY - adjusts the treble

tones

4INCREDIBLE SURROUND - creates a

super-enhanced stereo effect

5VOLUME - to adjust volume level

6POWER slider - selects the sound source

for CD/ TUNER / TAPE and also the POWER

OFF switch

7OPEN•CLOSE - opens/ closes the CD door

8CASSETTE RECORDER keys

RECORD 0- starts recording

PLAY 1 - starts playback

SEARCH 5/ 6

- fast winds/rewinds the tape

STOP•OPEN 9/ - stops the tape;

- opens the cassette

compartment

PAUSE ; - pauses recording or playback

9BATT LOW - indicates when battery power

is running low

0PROGRAM -

CD: programmes tracks and reviews the

programme;

Tuner: programmes preset radio stations

!PLAY PAUSE 2; - starts or pauses CD

playback

@STOP 9- stops CD playback; erases a CD

programme

#PRESET 4,3- selects a preset tuner

station (down, up)

$CD MODE - selects different play modes:

REPEAT or SHUFFLE (random) order

%SEARCH ∞/ §

Tuner: - (down, up) tunes to radio stations;

CD: - searches back and forward within a

track;

- skips to the beginning of a current

track/ previous/ later track

^REMOTE SENSOR (for AZ 2025 model only)-

infrared sensor for remote control

&BAND - selects waveband

BACK PANEL

*Telescopic aerial - improves FM reception

(AC MAINS - inlet for mains lead

)Battery compartment - for eight batteries,

type R-20, UM-1 or D-cells

REMOTE CONTROL (for AZ 2025 model only)

VOLUME 3,4–adjusts volume level

PRESET 3,4(up, down) –selects a preset

radio station

TUNING ∞, §(down, up) –tunes to radio

stations

SHUFFLE –to play CD tracks in random order

REPEAT –repeats a track/ CD programme/

entire CD

2; –starts and pauses CD playback/

interrupts CD playback

¡, ™–skips to the beginning of a current

track/ previous/ later track

STOP 9–stops CD playback or erases a

CD programme

SEARCH 5, 6–searches backwards or

forwards within a track/CD

English

POWER SUPPLY

Whenever convenient, use the mains supply if you want to

conserve battery life. Make sure you remove the mains plug from

the set and wall socket before inserting batteries.

BATTERIES (NOT INCLUDED)

1. Open the battery compartment and insert 8 batteries,

type R-20, UM-1 or D-cells, (preferably alkaline) with the

correct polarity as indicated by the "+" and "–" symbols inside

the compartment.

Remote control (supplied for AZ2025 model only)

Open the battery compartment and insert two batteries,

type AAA, R03 or UM4 (preferably alkaline).

2. Replace the compartment door, making sure the batteries are

firmly and correctly in place. The set is now ready to operate.

–If BATT LOW lights up, battery power is running low.

–The BATT LOW indicator eventually goes out if the

batteries are too weak.

Incorrect use of batteries can cause electrolyte leakage and will

corrode the compartment or cause the batteries to burst.

Therefore:

•Do not mix battery types: e.g. alkaline with carbon zinc.

Only use batteries of the same type for the set.

•When inserting new batteries, do not try to mix old batteries

with the new ones.

•Remove the batteries if the set is not to be used for a long

time.

•Batteries contain chemical substances, so they should

be disposed of properly.

Using AC POWER

1. Check if the mains supply, as shown on the type plate

located on the bottom of the set, corresponds to your local

mains supply. If it does not, consult your dealer or service

centre.

2. If your set is equipped with a voltage selector, adjust the

selector so that it matches with the local mains.

3. Connect the mains lead to the wall socket and the set is now

ready for use.

4. To disconnect the set from the mains supply completely,

remove the mains plug from the wall socket.

AZ 2025/00 page 5

8 x R20 • UM-1 • D-CELLS

MAINS ~

English

BASIC FUNCTIONS

Switching on and off

•Adjust the POWER slider to the desired sound source: CD,

TUNER or TAPE.

•The set is switched off when the POWER slider is in the

TAPE/OFF position and the keys on the tape deck are

released.

™The volume, tone, sound settings and tuner presets will be

retained in the set's memory.

™When switching off, may show briefly in the display

if you have been using the CD or tuner function.

PHILIPS demo mode

1. On the set, press the CD STOP 9button for 5 seconds.

™PH..IL ..IPS and demo mode messages scroll across the

display continuously.

2. To return to the current display you can either:

•press any function button on the front panel. This interrupts

the demo mode for 30 seconds;

•press the CD STOP 9button for 5 seconds. PH..IL ..IPS

scrolls across the display once before the demo mode is

cancelled.

Adjusting volume and sound

1. Turn the VOLUME control clockwise to increase or anti-

clockwise to decrease volume on the set.

For AZ 2025 model only:

Press VOLUME 3or 4on the remote control.

™Display shows the volume level VoL and a number from 0-32.

2. Press DIGITAL DYNAMIC BASS BOOST once or more to

switch on or off.

™If on, indicator 1 lights up. Press again if you want extra bass

and indicator 2 lights up.

3. To adjust the treble tone level, press ULTRA HIGH CLARITY

once or more to switch on or off.

™If on, the indicator lights up.

4. Press INCREDIBLE SURROUND once or more to switch the

surround sound effect on or off.

™If on, the indicator lights up.

Note: The effect of INCREDIBLE SURROUND may vary with

different types of music.

AZ 2025 /00 page 6

BATT

LOW

English

DIGITAL TUNER

GENERAL INFORMATION

General maintenance

•Do not expose the set, batteries, CDs or cassettes to humidity,

rain, sand or excessive heat caused by heating equipment or

direct sunlight.

•To clean the set, use a soft, slightly dampened chamois

leather. Do not use any cleaning agents containing alcohol,

ammonia, benzene or abrasives as these may harm the

housing.

Safety information

•Place the set on a hard and flat surface so that the system

does not tilt. Make sure there is adequate ventilation to

prevent the system from overheating.

•The mechanical parts of the set contain self-lubricating

bearings and must not be oiled or lubricated.

TUNING TO RADIO STATIONS

1. Select TUNER source.

™is displayed briefly and then the radio station

frequency is shown.

2. Press BAND once or more to select your waveband.

3. Press SEARCH ∞or §(for AZ 2025 model only: on the

remote control, TUNING ∞or §) and release when the

frequency in the display starts running.

™The tuner automatically tunes to a station of sufficient

reception. Display shows during automatic tuning.

™If a FM station is received in stereo, STEREO is shown.

4. Repeat step 3 if necessary until you find the desired station.

•To tune to a weak station, press SEARCH ∞or §briefly and

repeatedly until you have found optimal reception.

To improve radio reception

–For FM, pull out the telescopic aerial. Incline and turn the

aerial. Reduce its length if the signal is too strong (very close

to a transmitter).

–For MW (LW), the set is provided with a built-in aerial so the

telescopic aerial is not needed. Direct the aerial by turning the

whole set.

AZ 2025/00 page 7

English

DIGITAL TUNER CD PLAYER

Programming radio stations

You can store up to a total of 30 radio stations in the memory.

1. Tune to your desired station (see Tuning to radio stations).

2. Press PROGRAM to activate programming.

–Display: PROGRAM flashes.

3. Press PRESET 4or 3once or more to allocate a number from

1 to 30 to this station.

4. Press PROGRAM again to confirm the setting.

–Display: PROGRAM disappears, the preset number and the

frequency of the preset station are shown.

5. Repeat the above four steps to store other stations.

•You can overwrite a preset station by storing another

frequency in its place.

Tuning to preset stations

Press PRESET 4or 3until the desired preset station is displayed.

PLAYING A CD

This CD player plays Audio Discs including CD-Recordables and

CD-Rewritables.

1. Select CD source.

™is displayed briefly.

2. Press OPEN•CLOSE to open the CD compartment.

™Display: when you open the CD compartment.

3. Insert a CD with the printed side facing up and press

OPEN•CLOSE to close the CD compartment.

™Display: the CD player scans the contents of a CD, and then

the total number of tracks and playing time are shown.

Display: is shown if you have inserted a

non-finalized CD-R(W).

4. Press PLAY•PAUSE 2; (for AZ 2025 model only: on the

remote control 2;) to start playback.

™Display: Current track number and elapsed playing time of the

track during CD playback.

5. To pause playback press PLAY•PAUSE 2;.

Press PLAY•PAUSE 2; again to resume play.

™Display: the elapsed playing time flashes when playback is on

pause.

6. To stop CD playback, press STOP 9.

Note: CD play will also stop when:

– the CD door is opened;

– the CD has reached the end

(unless you have selected REPEAT or REPEAT ALL);

– you select another source: TAPE / TUNER.

AZ 2025 /00 page 8

BATT

LOW

BATT

LOW

English

CD PLAYER

Selecting a different track

•Press SEARCH ∞or §on the set, (for AZ 2025 model only:

on the remote control ¡or ™) once or repeatedly until the

desired track number appears in the display.

•If you have selected a track number shortly after loading a CD or

in the PAUSE position, you will need to press

PLAY•PAUSE 2; (on the remote control 2;) to start playback.

Finding a passage within a track

1. Press and hold down SEARCH ∞or §

(for AZ 2025 model only: on the remote control 5or 6).

™The CD is played at high speed and low volume.

2. When you recognize the passage you want,

release SEARCH ∞or §.

–Normal playback continues.

Note: During a CD programme or if SHUFFLE/ REPEAT is active,

searching is only possible within a track.

Different play modes: SHUFFLE and REPEAT

You can select and change the various play modes before or during

playback. The play modes can also be combined with PROGRAM.

SHUFFLE - tracks of the entire CD/ programme are played in

random order

SHUFFLE and REPEAT ALL - to repeat the entire CD/ programme

continuously in random order

REPEAT ALL - to repeat the entire CD/ programme

REPEAT - to play the current track continuously

1. To select your play mode, press CD MODE on the set (or for

AZ 2025 model only: press SHUFFLE or REPEAT on the remote

control) before or during playback until the display shows the

desired function.

2. Press PLAY•PAUSE 2; to start playback if in the STOP

position.

3. To return to normal playback, press the respective SHUFFLE or

REPEAT button until the various SHUFFLE/ REPEAT modes are

no longer displayed.

– You can also press STOP 9to cancel your play mode.

Note: In SHUFFLE mode, the display shows rapid patterns e.g.

, when the CD player selects a random track number.

AZ 2025/00 page 9

BATT

LOW

BATT

LOW

English

Programming track numbers

In the STOP position, select and store your CD tracks in the desired

sequence. If you like, store any track more than once. Up to

20 tracks can be stored in the memory.

1. Use the SEARCH ∞or §on the set, (for AZ 2025 model only:

on the remote control

¡or ™

) to select your desired track number.

2. Press PROGRAM.

™Display: PROGRAM and the selected track number Prog

appears briefly.

™If you attempt to programme without first selecting a track

number, no SEL or no Prog scrolls across the display.

3. Repeat steps 1-2 to select and store all desired tracks.

™FULL is displayed if you attempt to programme more than

20 tracks.

4. To start playback of your CD programme, press

PLAY•PAUSE 2; (for AZ 2025 model only: on the remote

control 2;).

Reviewing the programme

In the STOP position or during playback, press and hold down

PROGRAM for a while until the display shows all your stored track

numbers in sequence.

Erasing a programme

You can erase the programme by:

–pressing STOP 9once in the STOP position or twice during

playback.

•no Progscrolls across the display briefly and PROGRAM

disappears.

–you select another source: TAPE / TUNER.

CD PLAYER

AZ 2025 /00 page 10

BATT

LOW

BATT

LOW

English

CD PLAYER CASSETTE RECORDER

CD player and CD handling

•If the CD player cannot read CDs correctly, use a commonly

available cleaning CD to clean the lens before taking the set to

repair. Other cleaning methods may destroy the lens.

•The lens of the CD player should never be touched!

•Sudden changes in the surrounding temperature can cause

condensation to cloud over on the lens of your CD player.

Playing a CD is then not possible. Do not attempt to clean the

lens but leave the set in a warm environment until the moisture

evaporates.

•Always keep the CD compartment closed to avoid dust on the

lens.

•To take a CD out of its box, press the centre spindle while

lifting the CD. Always pick up the CD by the edge and return

the CD to its box after use to avoid scratching and dust.

•To clean the CD, wipe in a straight line from the centre

towards the edge using a soft, lint-free cloth. Do not use

cleaning agents as they may damage the disc.

•Never write on a CD or attach any stickers to it.

CASSETTE PLAYBACK

1. Select TAPE source.

™The display shows tAPE throughout tape operation.

2. Press STOP•OPEN 9/ to open the cassette door.

3. Insert a recorded cassette and close the cassette door.

4. Press PLAY 1to start playback.

5. To interrupt playback, press PAUSE ;. To resume, press this

key again.

6. By pressing SEARCH 5or 6on the set,fast winding of the

tape is possible in both directions.

7. To stop the tape, press STOP•OPEN 9/.

– The keys are automatically released at the end of the tape and

the tAPE indication goes out, except if PAUSE ;has been

activated.

AZ 2025/00 page 11

BATT

LOW

English

Otros manuales para AZ2020

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Reproductor de CD de Philips

Philips

Philips AZ 1005 Manual de usuario

Philips

Philips ACT7585 Manual de usuario

Philips

Philips AZ3300/37 Manual de usuario

Philips

Philips EXP2581 Manual de usuario

Philips

Philips AZ1119/10 Manual de usuario

Philips

Philips psa[cd ACT500 Manual de usuario

Philips

Philips CDI 360 Manual de usuario

Philips

Philips AZ1836/98 Manual de usuario

Philips

Philips AZ6831 - Cd Portable Manual de usuario

Philips

Philips AX2500 Manual de usuario

Philips

Philips AZ8075 - Portable Radio Cass Rec Manual de usuario

Philips

Philips AZ9355 Manual de usuario

Philips

Philips AZ215 Hoja de información del producto

Philips

Philips AZ 7275 Manual de usuario

Philips

Philips AX2500/00 Manual de usuario

Philips

Philips AZ6840 Manual de usuario

Philips

Philips AZ1080 Manual de usuario

Philips

Philips AX6301 Manual de usuario

Philips

Philips TK 996 Manual de usuario

Philips

Philips CD 582 Manual de usuario

Philips

Philips AX2460 Manual de usuario

Philips

Philips AZ1307 - Portable Radio Cass Rec Manual de usuario

Philips

Philips AX3202 Manual de usuario

Philips

Philips AZ 7260 Manual de usuario

Manuales populares de Reproductor de CD de otras marcas

RCA

RCA RP-7923 Manual de usuario

Pioneer

Pioneer DEH-P3550MP XM Manual de usuario

Lasonic

Lasonic MSU-2020 Manual de usuario

THOMSON

THOMSON RCD150 Manual de usuario

Denon

Denon DCD-1420 Manual de usuario

Panasonic

Panasonic SJ-MR100 Manual de usuario

Onkyo

Onkyo DX-7210 Manual de usuario

Sony

Sony MZ-R3 Manual de usuario

Denon

Denon DVM-4800 Manual de usuario

JBL

JBL MR-32 Manual de usuario

RCA

RCA RCD152 Manual de usuario

Technics

Technics SL-PS770A Manual de usuario

Clarion

Clarion compact disc Manual de usuario

Sony

Sony MZ-M10 Manual de usuario

Rotel

Rotel RCD 975 Manual de usuario

Pioneer

Pioneer CLD-D790 Manual de usuario

Optimus

Optimus CD-8250 Manual de usuario

Audiovox

Audiovox CE101A - annexe 1 Manual de usuario