Philips CE600N Manual de usuario

CE600N

Car Audio/

Video System

www.philips.com/support

User manual

1EN

Contents

1 Safety 2

2 Your car entertainment system 2

What's in the box 2

Overview 3

3 Setup 4

Connect wires 4

Mount into the dashboard 7

4 Basics 8

Switch on or o 8

Use the touch screen 8

Set the date and time 9

Adjust the screen 9

5 Radio 9

Tune in to radio stations 9

6 Play with RDS 10

Turn on RDS 10

Select program type 10

Select alternate frequencies 11

Receive trac announcement 11

Set RDS clock 12

7 USB 12

Play music 12

Play videos 13

8 Navigation system 14

Insert the map data card 14

Navigate your road trip 14

9 Bluetooth 14

Connect your Bluetooth device 14

Enjoy music from your

Bluetooth device 15

Make phone calls 15

Voice Control 16

Answer phone calls 16

Use the Phonebook 16

10 AV-IN 17

11 Additional devices 17

Connect additional devices 17

12 Sound 18

Select the equalizer settings 18

Select the channel settings 18

Select the Bass settings 19

Select the Subwoofer settings 19

Select the crossover settings 19

13 Settings 20

System settings 20

Bluetooth settings 20

System information 20

14 Reset 21

15 Product information 21

16 Troubleshooting 22

General 22

Bluetooth 23

17 Notice 24

Care of the environment 24

Trademark notice 24

2EN

2 Your car

entertainment

system

What's in the box

Check and identify the contents of the

package:

g h

a Main unit with Sleeve

b ISO male connector

c Nut

d Screw

e Hexagon head screw

f GPS Antenna

1 Safety

Read and understand all instructions

before you use the device. If damage is

caused by failure to follow instructions,

the warranty does not apply.

• The device is designed for negative

ground (earth) 12 V DC operation

only.

• Risk of car accidents! Never watch

video or operate this system while

driving.

• To ensure safe driving, adjust the

volume to a safe and comfortable

level.

• Improper fuses can cause damage

or re. When you need to change

the fuse, consult a professional.

• Use only the supplied mounting

hardware for a safe and secure

installation.

• To avoid short circuits, do not

expose the device, remote control

or remote control batteries to rain

or water.

• The device shall not be exposed to

dripping or splashing.

• Do not place any sources of danger

on the device (e.g. liquid lled

objects, lighted candles).

• Never insert objects into the

ventilation slots or other openings

on the device.

• Risk of damage to the screen! Never

touch, push, rub or strike the screen

with any object.

• Clean the device with soft, damp

cloth. Never use substances such

as alcohol, chemicals or household

cleaners on the device.

3EN

g Trim Plate

h Printed materials

Overview

Main unit

gf ab cde

• Press to switch on.

• Press and hold to switch o.

• Press to mute or unmute.

b +/-

• Press to increase or decrease

the volume.

c / DISP

• Press to display the set clock.

• Press and hold to turn o

display.

d RES

• Press to reset the system.

e MIC

• Microphone

f Touch screen

• Press to enter the Home screen.

Home screen

Tap the icons to select functions:

• : Tune to FM/AM radio stations.

• : Play music/videos from the

connected USB storage device.

• : Make/ answer phone calls from

the connected mobile phone.

• : Stream music from the connected

Bluetooth device.

• : Enter GPS navigation system or

exit.

• : Play music/videos from the

external media player that is

connected through audio/video

cables.

• : Enter the settings menu.

• : Enter the DVR operation

function.

Note

•The DVR icon appears only when a DVR

device connects to the DVR interface.

Please check with your distributor to get a

proper DVR for this unit.

4EN

3 Setup

Always follow the instructions in this

chapter in sequence.

These instructions are for a typical

installation. However, if your car has

dierent requirements, make the

adjustment accordingly. If you have

any question regarding installation kits,

consult your local retailer.

Note

•This system is designed for negative

ground (earth) 12V DC operation only.

•Always install this system in the car

dashboard. Other locations can be

dangerous as the rear of the system heats

up during use.

•To avoid short-circuit: before you connect,

make sure that the ignition is o.

•Make sure that you connect the yellow and

red power supply leads after all other leads

are connected.

•Make sure that all loose leads are insulated

with electrical tape.

•Make sure that the leads do not get caught

under screws iron parts that will move (e.g.

seat rail).

•Make sure that all ground (earth) leads are

run to a common ground (earth) point.

•Use only the supplied mounting hardware

for a safe and secure installation.

•Improper fuses can cause damage or re.

When you need to change the fuse, consult

a professional.

•When you connect other devices to this

system, make sure that the rating of the car

circuit is higher than the total fuse value of

all the connected devices.

•Never connect speaker wires to the metal

body or chassis of the car.

•Never connect speaker wires with stripes to

one another.

Connect wires

Note

•Make sure that all loose leads are insulated

with electrical tape.

•Consult a professional to connect wires as

instructed below.

•Before connection, check the car's wiring

carefully.

1 Connect the ISO male connectors.

ISO male

connectors

Connect to

a Green strip,

black-edged

green strip

Rear left speaker

bWhite strip,

black-edged

white strip

Front left

speaker

c Gray strip, black-

edged gray strip

Front right

speaker

dPurple strip,

black-edged

purple strip

Rear right

speaker

e Red strip Ignition key +12V

DC when ON/

ACC

f Blue strip Motor/electric

antenna relay

control lead

5EN

ISO male

connectors

Connect to

gBlue strip, white

strip

Amplier relay

control lead

h Black strip Ground

i Yellow strip The +12V car

battery which is

energized at all

times

2 Connect other wires if necessary.

Connectors

and sockets on

rear panel

External sockets

or connectors

1 For ISO male

connectors

As indicated

above

(White socket)

Rear left speaker

(Red socket)

Rear right

speaker

(White socket)

Left audio

output of the

external player

(Red socket)

Right audio

output of the

external player

(Yellow socket)

Video output

of the external

player

5CAMERA IN

(Yellow socket)

Video output

socket of an

external camera

(Yellow socket)

Video input of

the external

display device

(Black

connector)

GPS smart

antenna

(White socket)

Front left

speaker

(Red socket)

Front right

speaker

Connectors

and sockets on

rear panel

External sockets

or connectors

(Black/ brown

wire)

SWC (Steering

Wheel Control)

(Purple wire)

Reverse camera

(B+)

(Pink wire)

Parking brake (-)

(Black socket)

External

microphone

(Black socket)

DVR In

(Black socket)

Radio antenna

(Black socket)

Subwoofer

(Black socket)

USB connector

of the external

USB storage

device

Tip

•The pin arrangement for the ISO

connectors depends on the type of your

vehicle. To avoid damage to the system,

connect properly.

6EN

/5/5

*36$17(11$

b cd

e f gh

Remark: The device supports

DVR Video In function. Contact

the dealer for detailed operation!

7EN

Mount into the

dashboard

Note

•Make sure that wires are correctly

connected before you mount the main unit

into a car.

•If preset radio stations are lost when the

ignition key is turned OFF and then back

ON, reconnect the red leads crosswise to

the yellow ones.

1 If the car does not have an on-

board drive or navigation computer,

disconnect the negative terminal of

the car battery.

• If you disconnect the car battery

in a car that has an on-board

drive or navigation computer, the

computer may lose its memory.

• If the car battery is not

disconnected, to avoid short-

circuit, make sure that bare wires

do not touch each other.

2 Make sure that the car dashboard

opening is within these

measurements:

182 mm

112 mm

5 mm

• Since the unit cannot be used if

the dashboard opening's slant

angle is above 20 degrees, make

sure that the horizontal slant of

the car dashboard opening is

between 0 and 20 degrees.

3 Remove the mounting sleeve with

the supplied disassembly tools.

4 Install the sleeve into the

dashboard and bend the tabs

outward to x the sleeve.

5 Slide the unit into the sleeve until

you hear a “click”.

8EN

6 Attach the trim plate. 4 Basics

Switch on or o

1 Press to switch on.

• For the rst-time use, follow

the onscreen instructions to

complete the setup.

2 To switch o, press and hold

until the screen dims.

Use the touch screen

1 Press to enter the Home screen.

2 Tap the icon or menu item to select

or enter the functional or options

menu.

3 Tap to return to the previous

screen.

9EN

5 Radio

Press to enter the Home screen. Tap

Tune in to radio stations

Auto tune

The rst time you tune in to the radio,

start

Auto tune to search for stations.

1 Tap FM or AM to select a band.

FM bands: FM1, FM2, FM3

AM band: AM

2 Tap to start Auto Store.

» For each band, up to 6 stations

are stored as presets.

» The preset stations are listed at

the bottom of the screen.

3 Tap to select a preset station.

Tip

•When you move to a new place (such as a

new city or country), restart auto tune for

better reception.

Manual tune

Use Manual tune to search for a

frequency or station.

Set the date and time

1 On the Home screen, tap >

2 In and , tap

, , , to select your options.

Adjust the screen

Adjust the screen brightness

1 On the Home screen, tap >

2 In , tap , to select your

options.

Calibrate the touch panel

1 On the Home screen, tap >

2 In ,tap to calibrate

the positioning of your taps on the

screen.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de vídeo para coche de Philips

Philips

Philips PAC132 Manual de usuario

Philips

Philips PV7002I Manual de usuario

Philips

Philips CED1500BT Manual de usuario

Philips

Philips CID3693/00 Manual de usuario

Philips

Philips CED1700/51 Manual de usuario

Philips

Philips CED1900BT Instrucciones de instalación y funcionamiento

Philips

Philips PAC131/00 Manual de usuario

Philips

Philips PAC130 Manual de usuario

Philips

Philips CID3286/93 Manual de usuario

Philips

Philips CID3292 Manual de usuario

Philips

Philips CE120X/78CE120/55 Manual de usuario

Philips

Philips CED1900 Manual de usuario

Philips

Philips CID3750 Manual de usuario

Philips

Philips CID3695/00 Manual de usuario

Philips

Philips CE600BT Manual de usuario

Philips

Philips CID3693/00 Manual de usuario

Philips

Philips CED232 Manual de usuario

Philips

Philips CED1700/51 Manual de usuario

Philips

Philips CID2280 Manual de usuario

Philips

Philips CID2680/51 Manual de usuario

Philips

Philips CED229/51 Manual de usuario

Philips

Philips CID3286/93 Manual de usuario

Philips

Philips CED1700 Manual de usuario

Philips

Philips CID3695/00 Manual de usuario

Manuales populares de Sistema de vídeo para coche de otras marcas

Stinger

Stinger HEIGH10 RB10RAM13B Manual de usuario

Eonon

Eonon E1057 Manual de usuario

Milion

Milion D2223 Manual de usuario

Metra Electronics

Metra Electronics 99-8153 Manual de usuario

Voxx Electronics

Voxx Electronics HR8MA1 Manual de usuario

Axxera

Axxera AV604Bi Manual de usuario

Clarion

Clarion NX706E Manual de usuario

Pyle view

Pyle view PLDN74BTi Manual de usuario

Clarion

Clarion NX602 Manual de usuario

PowerAcoustik

PowerAcoustik PTID-5850N Manual de usuario

RCA

RCA DRC6296 - Twin 9" Mobile DVD System Guía del usuario

Lanzar

Lanzar SVDVD5 Manual de usuario

Kia

Kia MTXM100YPPE Manual de usuario

Eonon

Eonon E1060 Manual de usuario

Macrom

Macrom M-AN900 Manual de usuario

Hyundai

Hyundai BAPE-L3000N Manual de usuario

r.LiNK

r.LiNK RL2-UCON8-SM Manual de usuario

Blaupunkt

Blaupunkt DVP 01C Manual de usuario