Philips AVENT SCD711 Manual de usuario

FR-NL

SCD710/SCD711

SCD713/SCD715

English 6

Español 17

Nederlands 29

Português 41

English

1 2 3 4

98765

6English

Introduction

Go to www.philips.com/welcome to register your product and to read the

detailed user manual.

Display of the parent unit (Fig. 1)

1 Signal strength indicator

2 Eco Max indicator

3 Mute symbol

4 Battery status indicator

5 Microphone sensitivity indicator

6 Lullaby symbol

7 Nightlight symbol

8 Timer symbol

9 Temperature symbol

10 Navigation arrow

Preparing for use

IMPORTANT: Read the safety instructions carefully before you use the

baby monitor and keep them for future reference.

Baby unit

We advise you to use the baby unit connected to the mains. To guarantee

automatic power backup in case of mains failure, you can insert four 1.5V AA

alkaline batteries (not included).

Do not use rechargeable batteries. The baby unit does not have a charging

function and rechargeable batteries discharge slowly when they are not in

use.

Parent unit

The parent unit runs on two rechargeable batteries that are supplied with

the baby monitor. Charge the parent unit before you use it for the first time

and when the batteries are low.

Please note that for the SCD710/SCD711/SCD713, you have to charge the

parent unit for the full 10 hours to have a cordless operating time of 18

hours. (For the SCD715: the charging time is 14 hours and the operating

time is 25 hours.

Note: When you start using the baby monitor, it takes 4 charge and

discharge cycles before the rechargeable batteries reach their full capacity.

English

Using the baby monitor

Positioning the baby monitor

Keep the baby unit out of the reach of the baby. Never place the

baby unit inside the baby’s bed or playpen.

-Because the cord of the baby unit presents a potential strangulation

hazard, make sure that the baby unit and its cord are at least 1 metre/3.5

feet away from your baby.

-To prevent a high-pitched sound from one or both units, make sure that

the parent unit is at least 1 metre/3.5 feet away from the baby unit.

Linking parent unit and baby unit

1Press and hold the button on the baby unit for 2 seconds until the

power-on light goes on.

2Press and hold the button on the parent unit for 2 seconds until the

display lights up. The 'link' light on the parent unit starts flashing red and

the message 'LINKING' appears on the display.

When the parent unit and baby unit are linked, the 'link' light turns solid

green. The signal strength indicator and the message 'LINKED' appear on

the display.

If no connection is established, the message 'NOT LINKED' is displayed

and the parent unit starts and the parent unit starts to beep.

What to do if no link is established

-If the parent unit is out of range, place it closer to the baby unit, but not

closer than 1 metre/3.5 feet.

-If the baby or parent unit is too close, <2m/6.5 ft away from another

DECT appliance (e.g. a cordless phone), switch off this appliance or move

the unit away from this appliance.

-If the baby unit is switched off, switch it on.

Operating range

-The operating range is 330 metres/1000 feet outdoors and up to 50

metres/150 feet indoors.

-The operating range of the baby monitor varies depending on the

surroundings and factors that cause interference. Wet and moist

materials cause so much interference that the range loss is up to 100%.

For interference from dry materials, see the table below.

Dry materials Material thickness Loss of range

Wood, plaster, cardboard,

glass (without metal, wires

or lead)

< 30cm (12in) 0-10%

Brick, plywood < 30cm (12in) 5-35%

Reinforced concrete < 30cm (12in) 30-100%

8English

Dry materials Material thickness Loss of range

Metal grilles or bars < 1cm (0.4in) 90-100%

Metal or aluminium sheets < 1cm (0.4in) 100%



Functions and feedback on the baby unit

Nightlight

The nightlight produces a soft glow that comforts your baby.

1Press the button on the baby unit to switch the nightlight on or off.

Lullaby function

1Press the button on the baby unit to play the last selected lullaby. The

selected lullaby repeats for 15 minutes.

2Press the button to select another lullaby from the list.

3To adjust the sound level of the lullaby, press the volume + or the volume

– button the baby unit.

Note: You can only set the loudspeaker volume on the baby unit when a

lullaby is playing. If you set the volume for the lullaby higher, the sound

will also be louder when you use the talk function on the parent unit.

4To stop lullaby playing, press the button on the baby unit.

Paging the parent unit

If you have lost the parent unit, you can use the FIND button on the baby

unit to locate the parent unit. This function only works when the parent unit

is switched on and within range.

English

1Press FIND on the baby unit. The parent unit produces a paging alert

tone.

2To stop the paging alert tone, press FIND on the baby unit again or press

any button on the parent unit. The paging alert tone stops automatically

after 2 minutes.

Battery status light

1The battery status light is solid green when the baby unit is operating on

battery power and the batteries contain enough energy.

2The battery status light flashes red quickly when the batteries run low

while the baby unit is operating on battery power. Replace the batteries

when they run low.

Functions and feedback on the parent unit

Volume

The volume can be set if the menu is not active. There are seven volume

levels and a 'volume off' setting.

Setting the volume level

1Press the + button or the - button once.

The current volume level appears on the display.

2Press the + button to increase the volume or press the - button to

decrease the volume.

If no button is pressed for more than 2 seconds, the volume level

indication disappears from the display and the volume setting is saved.

Volume off

Below the lowest volume setting, there is a 'volume off' setting.

1Press the + button or the - button once.

The current volume level appears on the display.

2Press and hold the - button for more than 2 seconds to set the volume to

off.

The message 'MUTE' and the mute symbol appear on the display. Only

the sound level lights show that the baby produces sounds.

10 English

Talk function

1If you want to comfort your baby, press TALK on the parent unit and talk

clearly into the microphone on the front from a distance of 15-30cm

(0.5-1ft).

The 'link' light starts flashing green and 'TALK' appears on the display.

Note: If you have set the volume of the lullaby higher on the baby unit,

the sound will also be louder when you use the talk function on the

parent unit.

2Release TALK when you have finished talking.

Battery status indications

Battery low

When the rechargeable batteries are low, 'BATTERY LOW' appears on the

display, the status indicator is empty and flashes, and the parent unit beeps.

The remaining operating time is at least 30 minutes.

Battery empty

1If the rechargeable batteries are almost empty, the battery status light

flashes red quickly.

2If you do not connect the parent unit to the mains, it switches off.

Menu of the parent unit

Navigating the menu

Note: Some menu functions only work when the baby unit and the parent

unit are linked.

1Press the MENU button to open the menu and to make the first menu

option appear.

English

2Use the + button to go to the next option or the - button to go to the

previous option. The arrow on the display indicates in which direction

you can navigate.

3Press OK to confirm your selection.

Note: Press the MENU button if you want to leave the menu without making

any changes. If there is no input in the menu for more than 20 seconds, the

menu closes automatically.

Sensitivity

This option in the parent unit menu allows you to set the microphone

sensitivity of the baby unit.

The microphone sensitivity determines what noise level the baby unit picks

up, e.g. you will want to hear when your baby cries, but you may be less

interested in its babbling.

1Select ‘Sensitivity’ in the menu with the + and - buttons and press OK to

confirm.

2Use the + and - buttons to increase or decrease the microphone

sensitivity. The number of filled segments shows the sensitivity level

selected. Press OK to confirm the setting.

Sensitivity levels and indications

Icon Sensitivity Description

highest Hear everything from your baby.

The speaker of the parent unit is

continuously on.

high Hear all sounds from soft

babbling and louder. If your

baby does not make any sound,

the speaker of the parent unit is

off.

medium Hear sounds from soft cries and

louder. If your baby makes softer

sounds, the speaker of the

parent unit does not go on.

12 English

low The speaker of the parent unit

only goes on if the baby makes

loud sounds, for instance

because it is crying.

Eco Max mode

Smart Eco is a standard feature on this baby monitor. It automatically

reduces the DECT signal from the baby unit to save energy. To save even

more energy, activate the Eco Max mode. In this mode, the DECT signal of

the baby unit is switched off as long as the baby does not make a sound.

Caution: In Eco Max mode, the parent unit receives feedback from the

baby unit with a delay. When your baby makes a sound, the baby unit first

has to reactivate radio transmission before it can send feedback to the

parent unit.

Please note the following:

-In Eco Max mode you do not receive feedback when the parent unit is

out of range of the baby unit. You can check the link by pressing any

button on the parent unit.

-The Eco Max mode cannot be activated if the microphone sensitivity is

set to the highest level.

Activating Eco Max mode

1Select 'Eco Max' in the menu with the + and - buttons and press OK to

confirm.

2When the display shows 'Turn On', press OK to switch on the Eco Max

mode.

3The warning message 'No alert if out of range, OK' appears on the

display. Press OK to confirm.

Note: The warning message scrolls across the display twice. If you do not

press OK, the parent unit leaves the menu and the Eco Max mode

remains off.

4The Eco Max indication flashes on the display. The 'link' light flashes

green slowly when the baby unit does not transmit any signals to the

parent unit.

5When the parent unit receives a signal from the baby unit because radio

transmission has been reactivated, the 'link' light turns solid green.

Deactivating Eco Max mode

1Press the MENU button.

2Use the + and - buttons to select ‘Eco Max’ and press OK to confirm.

3When the display shows ‘Turn Off’, press OK to confirm.

Nightlight

1To switch the nightlight on the baby unit on, select 'Nightlight' in the

menu with the + and - buttons and press OK to confirm.

2Press OK to choose 'Turn On'. The nightlight symbol appears on the

display.

English

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Monitor de bebé de Philips

Philips

Philips AVENT SCD833 Manual de usuario

Philips

Philips Avent SCD730 Manual de usuario

Philips

Philips Avent SCD921 Manual de usuario

Philips

Philips SCD603/00 Manual de usuario

Philips

Philips SCD603 Manual de usuario

Philips

Philips AVENT SCD525 Manual de usuario

Philips

Philips SKM7491NC/05 Manual de usuario

Philips

Philips AVENT Manual de usuario

Philips

Philips SCD535/60 Manual de usuario

Philips

Philips AVENT SCD831 Manual de usuario

Philips

Philips SCD465 Manual de usuario

Philips

Philips AVENT SCD501/01 Manual de usuario

Philips

Philips AVENT SCD710 Manual de usuario

Philips

Philips SBCSC465/00 Manual de usuario

Philips

Philips AVENT DECT SCD535/00 Manual de usuario

Philips

Philips SBC SC468 Manual del sistema

Philips

Philips Avent SCD730 Manual de usuario

Philips

Philips SKM7489NC/00 Manual de usuario

Philips

Philips AVENT SCD535 Manual de usuario

Philips

Philips AVENT SCD580/00 Manual de usuario

Philips

Philips AVENT SCD603/10 Manual de usuario

Philips

Philips AVENT SCD713 Manual de usuario

Philips

Philips SBC SC361 Manual de usuario

Philips

Philips SCD590 Manual de usuario

Manuales populares de Monitor de bebé de otras marcas

Motorola

Motorola MBP15 Manual de usuario

Oricom

Oricom Babysense 7 Manual de usuario

Levana

Levana TW502 Manual de usuario

Luvion

Luvion Essential Manual de usuario

NUK

NUK Eco Control Video Display 550VD Manual de usuario

Lorex

Lorex sweet peek mini Manual de usuario

Mondevices

Mondevices MonBaby 2 Manual de usuario

Famidoc

Famidoc FDBB-V2 Manual de usuario

Graco

Graco iMonitor 2797 Manual de usuario

babymoov

babymoov High Care A014001 Manual de usuario

Ramili

Ramili RV1000 Manual de usuario

Swann

Swann SW231-FLO Manual de usuario

Badabulle

Badabulle Baby Online 300 m+ Manual de usuario

Philips AVENT

Philips AVENT SCD526/00 Manual de usuario

Uniden

Uniden Guardian UBR223 Manual de usuario

Summer

Summer Day & Night 28470A Manual de usuario

Ivation

Ivation Wireless Monitoring System Manual de usuario

Levana

Levana Lila Manual de usuario