Philips AVENT SCD565 Manual de usuario

SCD565

EN User manual 3

DE Benutzerhandbuch 22

EL Εγχειρίδιοχρήσης 43

ES Manual del usuario 68

FR Mode d’emploi 90

IT Manuale utente 112

PT Manual do utilizador 133

10 Storage 19

11 Ordering accessories 19

12 Guarantee and support 19

13 Frequently asked questions 19

1 Introduction

Congratulations on your purchase and welcome

to Philips AVENT! To fully benet from the

support that Philips AVENT offers, register your

product at www.philips.com/welcome.

Philips AVENT is dedicated to producing

caring, reliable products that give parents the

reassurance they need.This Philips AVENT baby

monitor provides round-the-clock support

by ensuring you can always hear your baby

clearly without any distracting noise.The DECT

technology guarantees zero interference and a

crystal clear sound between the baby unit and the

parent unit.

The temperature sensor enables you to monitor

the temperature in your baby’s room, and offers

you personalised settings to help keep your baby’s

room comfortable.

2 Product overview

•I Display

1 Signal strength indicator

2 Eco Max indicator

3 Mute symbol

4 Battery status indicator

5 Navigation arrow

6 Message eld

7 Microphone sensitivity indicator

8 Lullaby symbol

9 Nightlight symbol

10 Timer symbol

11 Temperature symbol

Table of contents

1 Introduction 3

2 Product overview 3

3 Preparing for use  4

3.1 Babyunit 4

3.2 Parent unit 5

4 Using the baby monitor 6

4.1 Positioningthebabymonitor 6

4.2 Linkingparentunitandbabyunit 7

5 Functions and feedback on the baby

unit 8

5.1 Nightlight 8

5.2 Lullabyfunction 8

5.3 Pagingtheparentunit 9

5.4 Batterystatuslight 10

6 Functions and feedback on the

parent unit 10

6.1 Volume 10

6.2 Talkfunction 11

6.3 Battery status indications 11

6.4 Signalstrengthindicator 13

6.5 Reset 13

7 Menu of the parent unit 13

7.1 Navigatingthemenu 13

7.2 Sensitivity 14

7.3 EcoMaxmode 14

7.4 Nightlight 15

7.5 Lullaby 16

7.6 Feedtimer 16

7.7 Temperature 17

7.8 Clock 17

7.9 Language 18

8 Neck strap 18

9 Cleaning and maintenance 18

ENGLISH

3 Preparing for use

IMPORTANT: Read the safety instructions

carefully before you use the baby monitor

and keep them for future reference.

3.1 Baby unit

Use the baby unit from the mains.To guarantee

automatic power backup in case of mains failure,

we advise you to insert non-rechargeable

batteries.

3.1.1 Mains operation

1 Put the adapter in a wall socket and insert the

small appliance plug into the baby unit.

3.1.2 Placing the non-rechargeable batteries

In case of mains failure the baby unit can run on

four 1.5V R6 AA alkaline batteries (not included).

Do not use rechargeable batteries.The baby

unit does not have a charging function and

rechargeable batteries discharge slowly when they

are not in use.

BWarning:

Unplugthebabyunitandmakesureyourhands

and the unit are dry when you insert non-

rechargeablebatteries.

DNote:

We advise you to use the baby unit on mains

power, as the baby unit has a limited operating

time when you use it on non-rechargeable alkaline

batteries.The operating time on non-rechargeable

batteries is 24 hours.

•II Parent unit

1 On/off button

2 TALK button

3 - button

4 Microphone

5 ’link’ light

6 Display

7 Sound level lights

8 MENU button

9 + button

10 Battery status light

11 OK button

12 Handgrip/attachment hole for neck strap

13 Compartment for rechargeable batteries

14 Lid of compartment for rechargeable

batteries

15 Socket for small plug of adapter

16 Neck strap

17 Rechargeable batteries

18 Small plug of adapter

19 Adapter

•III Baby unit

1 Nightlight and nightlight on/off button

2 Power-on light

3 FIND button

4 Microphone

5 Next lullaby button

6 Lullaby play/stop button

7 On/off button

8 Volume + button

9 Battery status light

10 Volume - button

11 Temperature sensor

12 Loudspeaker

13 Socket for small plug of adapter

14 Compartment for non-rechargeable

batteries

15 Lid of compartment for non-rechargeable

batteries

16 Small plug of adapter

17 Adapter

4 Then push down the lid until the lock closes

with a click.

3.2 Parent unit

The parent unit runs on two rechargeable

batteries that are supplied with the baby monitor.

3.2.1 Inserting the rechargeable batteries

1 Slide the lid of the compartment for the

rechargeable batteries off the parent unit.

2 Insert the rechargeable batteries.

DNote:

Make sure the + and - poles of the batteries

point in the right direction.

1 Push the lock to release the lid of the

compartment for non-rechargeable batteries and

remove the lid.

2 Insert four non-rechargeable batteries.

DNote:

Make sure the + and - poles point in the right

direction.

3 To reattach the lid, rst insert the lugs into the

openings in the rim of the compartment for

non-rechargeable batteries.

ENGLISH

4 Using the baby

monitor

4.1 Positioning the baby

monitor

BWarning:

Keepthebabyunitoutofthereachofthebaby.

Neverplacethebabyunitinsideormountiton

the baby’s bed or playpen.

1 Because the cord of the baby unit presents a

potential strangulation hazard, make sure that

the baby unit and its cord are at least

1 metre/3.5 feet away from your baby.

2 To prevent a high-pitched sound from one or

both units, make sure the parent unit is at least

1 metre/3.5 feet away from the baby unit.

3 Slide the lid of the compartment for the

rechargeable batteries back onto the parent

unit. Push the lid home until it locks into place

with a click.

3.2.2 Charging the parent unit

Charge the parent unit before you use it for the

rst time or when the parent unit indicates that

the batteries are low.

Important:You have to charge the parent

unit for the full 14 hours to have a cordless

operating time of 24 hours.

1 Put the adapter in a wall socket and insert the

small appliance plug into the parent unit.

•The display goes on and the battery status

indications show that the parent unit is

charging. For battery status indications,

see ‘Battery charge indications’ in chapter

‘Functions and feedback on the parent unit’.

2 Leave the parent unit connected to the mains

until the rechargeable batteries are fully charged.

DNote:

When you start using the baby monitor, it takes

four charge and discharge cycles before the

rechargeable batteries reach their full capacity.

•The ‘link’ light on the parent unit starts

ashing red and the message ‘LINKING’

appears on the display.

•When the parent unit and baby unit are

linked, the ‘link’ light turns solid green.

The signal strength indicator and the

message ‘LINKED’ appear on the display.

•If no connection is established within

10 seconds, the message ‘NOT LINKED’

on the display alternates with ‘LINKING’.

If still no connection is established after

30 seconds, the parent unit starts to beep and

only the message ‘NOT LINKED’ is shown.

4.2 Linking parent unit and

baby unit

1 Press and hold the on/off button 3on the

baby unit for 2 seconds.

•The nightlight, the battery status light and

the power-on light go on briey.

2 Press and hold the on/off button 3on the

parent unit for 2 seconds.

•The display goes on and briey displays all

indicators and symbols. Then the indicators

and symbols fade out and the battery status

indicator appears.

DNote:

When you switch on the parent unit for the

rst time or after a reset, you have to select

your preferred display language (see ‘Language’

in chapter ‘Menu of the parent unit’).

ENGLISH

5 Functions and

feedback on the

baby unit

5.1 Nightlight

The nightlight produces a soft glow that comforts

your baby.

1 Press the nightlight on/off button on the baby

unit to switch on the nightlight.

•Qappears on the display of the parent unit.

2 Press the nightlight on/off button again to

switch off the nightlight.

•The nightlight dims gradually before it goes

out completely.

•Q disappears from the display of the parent

unit.

5.2 Lullaby function

1 Press the lullaby play/stop button Kon the

baby unit to play the last selected lullaby.

•The selected lullaby repeats for 15 minutes.

•If no lullaby was selected before, lullaby

1 is played.

What to do if no link is established

•The parent unit may be out of range

of the baby unit. Place the parent unit

closer to the baby unit, but not closer

than 1 metre/3.5 feet.

•The baby unit or the parent unit may

lose connection because it is too

close to another DECT appliance

(e.g. a cordless phone). Switch off this

DECT appliance or place the unit

further away from this appliance.

•The baby unit may be switched off.

Switch on the baby unit.

4.2.1 Operating range

•The operating range is 330 metres/1000

feet outdoors and up to 50 metres/150 feet

indoors.

•The operating range of the baby monitor

varies depending on the surroundings and

factors that cause interference.Wet and moist

materials cause so much interference that

the range loss is up to 100%. For interference

from dry materials, see table below

Dry materials Material

thickness

Loss of

range

Wood, plaster, cardboard,

glass (without metal,

wires or lead)

< 30cm

(12in)

0-10%

Brick, plywood < 30cm

(12in)

5-35%

Reinforced concrete < 30cm

(12in)

30-100%

Metal grilles or bars < 1cm

(0.4in)

90-100%

Metal or aluminium

sheets

< 1cm

(0.4in)

100%

5.3 Paging the parent unit

If you have lost the parent unit, you can use the

FIND button on the baby unit to locate the

parent unit.

DNote:

The paging function only works when the parent

unit is switched on.

1 Press the FIND button on the baby unit.

•The message ‘PAGING’ appears on the

display of the parent unit and the parent

unit produces a paging alert tone.

2 To stop the paging alert tone, press the FIND

button on the baby unit again or press any

button on the parent unit.

DNote:

The paging alert tone stops automatically after

2 minutes.

2 Press the next lullaby button Eto select

another lullaby from the list.

•If no lullaby is playing, the last selected

lullaby starts playing when you press the

next lullaby button E.

•When you press the next lullaby button

Ewhile a lullaby is playing, the next

lullaby starts playing.

3 To adjust the sound level of the lullaby, press

the volume + or the volume - button on the

baby unit.

DNote:

You can only set the loudspeaker volume on the

baby unit when a lullaby is playing. If you have

set the volume for the lullaby higher on the baby

unit, the sound will also be louder when you use

the talk function on the parent unit.

4 To stop lullaby playing, press the lullaby play/

stop button Kon the baby unit.

ENGLISH

6 Functions and

feedback on the

parent unit

6.1 Volume

The volume can be set if the menu is not active.

There are seven volume levels and a ‘volume off’

setting.

6.1.1 Setting the volume level

1 Press the + button or the - button once.

•The current volume level appears on the display.

2 Press the + button to increase the volume or

press the - button to decrease the volume.

•The parent unit beeps at every volume step

•At maximum volume, the parent unit gives

two beeps.

•If no button is pressed for more than

2 seconds, the volume level indication

disappears and the volume setting is saved.

6.1.2 Volume off

Below the lowest volume setting, there is a

‘volume off ’ setting.

1 Press the + button or the - button once.

•The current volume level appears on the

display.

2 Press and hold the - button for more than

2 seconds to set the volume to off.

•The message ‘MUTE’ and the mute symbol

appear on the display.

5.4 Battery status light

1 The battery status light is solid green when

the baby unit runs on battery power and the

batteries contain enough energy.

2 The battery status light ashes red quickly

when the batteries run low while the baby

unit is running on battery power.

•Replace the batteries when they run low.

•If the batteries run out of power while the

baby unit is running on battery power,

the baby unit switches off and the parent

unit loses connection with the baby unit.

DNote:

We advise you to use the baby unit on mains

power, as the baby unit has a limited operating

time when you use it on non-rechargeable alkaline

batteries.The operating time on non-rechargeable

batteries is 24 hours.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Monitor de bebé de Philips

Philips

Philips AVENT SCD831 Manual de usuario

Philips

Philips SCD485/01 Manual de usuario

Philips

Philips SKM7489NC/00 Manual de usuario

Philips

Philips AVENT DECT SCD535/00 Manual de usuario

Philips

Philips SKM7488NC/84 Manual de usuario

Philips

Philips SBC SC477 DECT Manual de usuario

Philips

Philips SBCSC464 Manual de usuario

Philips

Philips AVENT SCD860 Manual de usuario

Philips

Philips SCD463 Manual de usuario

Philips

Philips AVENT SCD630 Manual de usuario

Philips

Philips AVENT SCD526 Manual de usuario

Philips

Philips SBC SC466 Manual de usuario

Philips

Philips Avent SCD506 Manual de usuario

Philips

Philips SCD588/54 Manual de usuario

Philips

Philips AVENT SCD620/05 Manual de usuario

Philips

Philips AVENT SCD860 Manual de usuario

Philips

Philips SBCSC478 Manual de usuario

Philips

Philips SC463 Manual de usuario

Philips

Philips AVENT SCD835 Manual de usuario

Philips

Philips SCD484 Manual de usuario

Philips

Philips SCD860/05 Manual de funcionamiento

Philips

Philips SCD600/00 Manual de usuario

Philips

Philips SBC SC463 Manual de usuario

Philips

Philips SCD570 Manual de usuario

Manuales populares de Monitor de bebé de otras marcas

Motorola

Motorola MBP15 Manual de usuario

Oricom

Oricom Babysense 7 Manual de usuario

Levana

Levana TW502 Manual de usuario

Luvion

Luvion Essential Manual de usuario

NUK

NUK Eco Control Video Display 550VD Manual de usuario

Lorex

Lorex sweet peek mini Manual de usuario

Mondevices

Mondevices MonBaby 2 Manual de usuario

Famidoc

Famidoc FDBB-V2 Manual de usuario

Graco

Graco iMonitor 2797 Manual de usuario

babymoov

babymoov High Care A014001 Manual de usuario

Ramili

Ramili RV1000 Manual de usuario

Swann

Swann SW231-FLO Manual de usuario

Badabulle

Badabulle Baby Online 300 m+ Manual de usuario

Philips AVENT

Philips AVENT SCD526/00 Manual de usuario

Uniden

Uniden Guardian UBR223 Manual de usuario

Summer

Summer Day & Night 28470A Manual de usuario

Ivation

Ivation Wireless Monitoring System Manual de usuario

Levana

Levana Lila Manual de usuario