Philips AC4076 Manual de usuario

EN User Manual 2 ZH-T 使用手冊 20

AC4076

清潔濾網更換濾網

4ENGLISH

Introduction

Congratulations on your purchase and welcome to Philips! To

fully benet from the support that Philips oers, register your

product at www.philips.com/welcome.

With this air purier with advanced highly eective German

ltration technology, you breathe cleaner air in your home.

For the best result, place the air purier in a room where you

spend most of your time, such as your bedroom, living room, or

children’s room.

There are many pollution sources. In a home, there can be

high condensation of formaldehyde and other harmful gases

coming from furniture, paints and smoking, etc. Because

these harmful pollutants can be invisible and odorless, they

can aect your health. The Philips air purier lters o these

harmful gases quickly and eectively. Furthermore, it can

also lter out pollutants such as pollens pm2.5 and bacteria,

airborne particles that can aect your well-being. With our air

purier, it improves the air quality and ensures you and your

family members breathe cleaner air at your home.

Filtration in a professional and credible way

The air purier has all-in-one high-eciency formaldehyde

removal HEPA lter that ensures the best air quality in your

home:

- Stage 1: The pre-lter has been treated with antibacterial

substances. It catches big particles like human hair, pet hair,

etc.

- Stage 2: The high-eciency formaldehyde removal HEPA

lter lters out dust, pollen and ultrane particles larger

than 20 nanometers, including bacteria and some viruses.

According to publications of the World Health Organization,

the avian and human inuenza viruses and Legionella

bacterium are larger than 20 nanometers.

General description (Fig. 1)

A Air quality light ring

B Air quality sensor outlet

C Air quality sensor

D Air quality sensor inlet

E Handle

F Air outlet

G Air inlet

H Cord storage facility

I Control panel

1 Light sensor for night mode

2 AIR QUALITY on/o button with light

3 Power on/o button with light

4 SILENT button with light

5 FAN SPEED button with light

ENGLISH

6 AUTO button with light

7 Fan speed lights (1, 2, 3 and boost power)/lter

replacement lights

8 FAN SPEED indications

9 REPLACE FILTER indications

J Filter 2: High-eciency formaldehyde removal HEPA lter

AC4147

K Filter 1: pre-lter

L Front panel

Important

Read this user manual carefully before you use the appliance

and save it for future reference.

Danger

- Do not let water or any other liquid or ammable detergent

enter the appliance to avoid electric shock and/or a re

hazard.

- Do not clean the appliance with water or any other liquid

or a (ammable) detergent to avoid electric shock and/or a

re hazard.

Warning

- Check if the voltage indicated on the bottom of the

appliance corresponds to the local mains voltage before

you connect the appliance.

- If the mains cord is damaged, you must have it replaced by

Philips, a service centre authorised by Philips or similarly

qualied persons in order to avoid a hazard.

- Do not use the appliance if the plug, the mains cord or the

appliance itself is damaged.

- This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and maintenance shall not be made by children

without supervision.

- Do not block the air inlet and outlet, e.g. by placing items

on the air outlet or in front of the air inlet.

Caution

- This appliance is not a substitute for proper ventilation,

regular vacuum cleaning or use of an extractor hood or fan

while cooking.

- If the wall socket used to power the appliance has poor

connections, the plug of the appliance becomes hot. Make

sure you plug the appliance into a properly connected wall

socket.

ENGLISH

- Always place and use the appliance on a dry, stable, level

and horizontal surface.

- Leave at least 20cm free space behind and on both sides of

the appliance and leave at least 30cm free space above the

appliance.

- Do not place anything on top of the appliance and do not

sit on the appliance.

- Do not place the appliance directly below an air conditioner

to prevent condensation from dripping onto the appliance.

- Make sure all lters are properly installed before you switch

on the appliance.

- Only use the original Philips lters specially intended for

this appliance. Do not use any other lters.

- Avoid knocking against the appliance (the air inlet and

outlet in particular) with hard objects.

- Always lift or move the appliance by the handle at the back

of the appliance.

- Do not insert your ngers or objects into the air outlet.

- Do not use this appliance when you have used indoor

smoke-type insect repellents or in places with oily residues,

burning incense or chemical fumes.

- Do not use the appliance near gas appliances, heating

devices or replaces.

- Always unplug the appliance after use and before you

clean it.

- Do not use the appliance in a room with major temperature

changes, as this may cause condensation inside the

appliance.

- The appliance is only intended for household use

under normal operating conditions.

- Do not use the appliance in wet surroundings or in

surroundings with high ambient temperatures, such as the

bathroom, toilet or kitchen.

- The appliance does not remove carbon monoxide (CO)

or radon (Rn). It cannot be used as a safety device in case

of accidents with combustion processes and hazardous

chemicals.

Electromagnetic elds (EMF)

This Philips appliance complies with all applicable standards

and regulations regarding exposure to electromagnetic elds.

ENGLISH

Before rst use

Placing the lters

Before using the appliance for the rst time, remove the

packaging materials of lter 2 and place it into the appliance as

described below.

Tip: Place the appliance against a wall for more stability

when you remove or insert lters.

Note: Make sure you insert the lters in the correct position.

1 Place your ngers in the recesses of the side panels and

gently pull the top part of the front panel towards you. Then

lift the hooks at the bottom of the panel out of the bottom

of the appliance.

2 Grab the two projections and pull the pre-lter towards you

to take it out of the appliance.

3 Remove the packaging material of lter 2 (high-eciency

formaldehyde removal HEPA lter).

4 Put lter 2 (high-eciency formaldehyde removal HEPA

lter) into the appliance.

Note: Make sure that the side with the tag is pointing

towards you.

ENGLISH

5 Place lter 1 (pre-lter) in the appliance.

Note: Make sure that the side with the two projections is

pointing towards you.

Note: Make sure that all hooks are properly attached to the

appliance.

6 To reattach the front panel, insert the bottom hooks into

the bottom of the appliance rst (1). Then push the panel

against the body of the appliance (2).

Using the appliance

1 Put the plug in the wall socket

All lights go on twice and you hear a beep. Then the lights

go out again.

2 Press the on/o button to switch on the appliance.

The power-on light, the AUTO light, and the AIR QUALITY

light on the control panel go on.

The air quality light ring shows the quality of the air.

␻▊☴㏨ ᴪᨑ☴㏨



ENGLISH

Air quality indication

Colour Air quality

Blue Very good

Deep purple Good

Purple Fair

Red Bad

To switch o the air quality light ring, press the AIR QUALITY

button.

Note: The air quality light ring automatically goes on when

the appliance is switched on.

The appliance automatically starts operating in the AUTO

mode.

To switch o the appliance, press the on/o button again and

unplug the appliance.

Note: When the humidity level in the room is very high,

it is possible that condensation develops on the air

quality sensor. As a result, the AIR QUALITY light on the

control panel and the air quality light ring may indicate that

the air quality is bad even though the air quality is good. In

this case, the auto mode causes the appliance to run at

high fan speed. You can solve this by cleaning the air quality

sensor. If condensation develops frequently during periods of

high humidity, we advise you to use one of the manual speed

settings.

Fan speed lights/lter replacement lights

- The lights on the right-hand side of the control panel have

a dual function: they either indicate the fan speed or they

indicate that the lters should be replaced or cleaned.

- When lights 1 to 2 light up continuously, they indicate the

current fan speed.

- When light 1 ashes, you have to clean the pre-lter. When

lights 2 ashes, you have to replace the high-eciency

formaldehyde removal HEPA lter.

- When light 2 and the REPLACE FILTER light are ashing

continuously, the high-eciency formaldehyde removal

HEPA lter have to be replaced, and the appliance is locked

(see chapter ‘Filter replacement lock’ for more information).

Adjusting the air quality sensor sensitivity

People with certain health problems (e.g. allergies or

asthma) have a greater need for healthy air. For this reason, the

appliance allows you to adjust the sensitivity of the air quality

sensor. If you set it to higher sensitivity level, the appliance

starts cleaning the air at lower pollution level.

␻▊☴㏨ ᴪᨑ☴㏨



ENGLISH

There are 3 sensitivity levels:

- standard

- sensitive

- extra sensitive

The pollution sensor is set to standard sensitivity by default.

You can adjust the sensitivity of the air quality sensor in the

following way:

1 If the appliance is already plugged in, unplug the appliance

and wait for a few minutes.

2 Press the AIR QUALITY button and simultaneously put the

mains plug in the wall socket.

The appliance beeps twice and one of the fan speed lights

ashes to show the current sensitivity level of the air quality

sensor.

Sensitivity level:

Fan speed light Sensitivity level

Extra sensitive

Sensitive

Standard

3 Press the FAN SPEED button to adjust the sensitivity level

of the air quality sensor.

One of the fan speed lights ashes to show the set

sensitivity level of the air quality sensor.

4 Press the on/o button to switch o the appliance.

Note: When you change the sensitivity level, the appliance

automatically starts operating at the set sensitivity level

whenever you switch on the appliance.

Auto mode

When the appliance is switched on, the built-in air quality

sensor automatically measures the ambient air quality. When

the auto mode is activated, the appliance selects the most

appropriate fan speed for the measured air quality.

1 Press the on/o button to switch on the appliance.

2 Press the AUTO button to activate the auto mode.

Note: When the appliance is operating in another mode

and you want to activate the auto mode, simply press the

AUTO button.

The AUTO light goes on.

␻▊☴㏨ ᴪᨑ☴㏨



␻▊☴㏨ ᴪᨑ☴㏨



Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Purificador de aire de Philips

Philips

Philips HF3654 Manual de usuario

Philips

Philips 3000i Series Manual de usuario

Philips

Philips AC4080/10 Manual de usuario

Philips

Philips TY5080 Manual de usuario

Philips

Philips 2000i Series Manual de usuario

Philips

Philips AC2729/90 Manual de usuario

Philips

Philips 2000i Series Manual de usuario

Philips

Philips AC4012 Manual de usuario

Philips

Philips AC4065 Manual de usuario

Philips

Philips AC8686 Manual de usuario

Philips

Philips AC4374 Manual de usuario

Philips

Philips 2000i Series Manual de usuario

Philips

Philips AC4055 Manual de usuario

Philips

Philips AC3033/86 Manual de usuario

Philips

Philips AC4002 Manual de usuario

Philips

Philips AC0817 Manual de usuario

Philips

Philips AC4012 Manual de usuario

Philips

Philips AC3829 Manual de usuario

Philips

Philips AC2729/10 Manual de usuario

Philips

Philips AC5663 Manual de usuario

Philips

Philips AC4052 Manual de usuario

Philips

Philips AC4025 Manual de usuario

Philips

Philips AC4072/18 Manual de usuario

Philips

Philips AC3858/50 Manual de usuario

Manuales populares de Purificador de aire de otras marcas

IKEA

IKEA UPPÅTVIND Manual de usuario

Nash

Nash AP-1 PureSmart Manual de usuario

LG PH-U450 Series Manual de usuario

DeLonghi

DeLonghi DDSX 220WFA Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Manual de usuario

Sharp

Sharp FU-40SE Manual de usuario

Hitachi

Hitachi EP-A3000 Manual de usuario

TruSens

TruSens Z-2000 Manual de usuario

Motorola

Motorola MBP87SN Manual de usuario

Beko

Beko ATP 7100I Manual de usuario

Carrier

Carrier INFINITY 1620 Manual de usuario

AtmosAir

AtmosAir P2002 Manual de usuario

Winix

Winix NK300 Manual de usuario

Friedrich

Friedrich C-90A Instrucciones de funcionamiento e instalación

Surgically Clean Air

Surgically Clean Air JADE2.0 Manual de usuario

Base aire

Base aire 555 Pro Manual de usuario

Champion

Champion CP25 Manual de usuario

vollara

vollara Air & Surface Pro+ Manual de usuario