Philips AC4002 Manual de usuario

AC4002

AC4004

www.philips.com/welcome

User manual

D E

123

511

14610



Congratulations on your purchase and welcome to Philips! To fully benet

from the support that Philips offers, register your product at www.philips.

com/welcome.

With this new bedroom air purier you breathe cleaner air. For the best

results, place the bedroom air purier in a room where you spend most of

your time, e.g. the bedroom.

Wherever there are people, plants or pets, there are airborne particles that

can affect your well-being, especially if you suffer from allergies. Because of

these particles, the air inside a room may be more polluted than the air in

a large city.

Normally, particles are invisible and odourless. Nevertheless, they can affect

your health. The bedroom air purier reduces the amount of animal dander

and industrial pollutants in the air, and therefore improves the air quality.

It also lters out ultrane particles larger than 20 nanometres, including

bacteria and some viruses. According to publications of the World Health

Organization, the avian and human inuenza viruses and the Legionella

bacterium are larger than 20 nanometres.



The bedroom air purier has a unique multi-stage ltration system that

ensures the best air quality:

- Stage 1: The pre-lter has been treated with antibacterial substances. It

catches big particles like human hair, pet hair etc.

- Stage 2 : In combination with the HEPA lter, the multi-care lter lters

out dust, pollen and ultrane particles larger than 20 nanometres,

including bacteria and some viruses. According to publications of the

World Health Organization, the avian and human inuenza viruses and

Legionella bacterium are larger than 20 nanometres.

- Stage 3: The activated carbon lter lters out odours and harmful gases

effectively.

- Stage 4: The high-performance composite HEPA lter with anti-

bacterial coating effectively lters out ne dust and cigarette smoke,

while the antibacterial and anti-mould functions of organic antibacterial

materials lter out germs and mould.



 Air quality sensor outlet

 Air quality sensor

 Air quality sensor inlet

 Air inlet

 Mains cord

 Air outlet

 Handle

 Control panel

 Pre-lter cleaning light

 Filter replacement lights

 REPLACE FILTER light with ‘appliance locked’ indication

 AIR QUALITY lights (AC4004: 4 lights, AC4002: 3 lights)

 HOUR lights

 TIMER on/off button with light

 AUTO button with light



 SLEEP button with light

 Power on/off button with light

 FAN SPEED button with light

 FAN SPEED lights (AC4004: 3 lights, AC4002: 2 lights)

 RESET button for pre-lter

 RESET button for lter 2

 RESET button for lter 3/4

 Filter 4: HEPA lter (AC4124)

 Filter 3: activated carbon lter (AC4123)

 Filter 2 (AC4004 only): multi-care lter (AC4121)

 Filter 1: pre-lter

 Front panel



Read this user manual carefully before you use the appliance and save it for

future reference.



- Do not let water or any other liquid or ammable detergent enter the

appliance to avoid electric shock and/or a re hazard.

- Do not clean the appliance with water or any other liquid or a

(ammable) detergent to avoid electric shock and/or a re hazard.



- Check if the voltage indicated on the bottom of the appliance

corresponds to the local mains voltage before you connect the

appliance.

- If the mains cord is damaged, you must have it replaced by Philips, a

service centre authorised by Philips or similarly qualied persons in

order to avoid a hazard.

- Do not use the appliance if the plug, the mains cord or the appliance

itself is damaged.

- This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for

their safety.

- Children should be supervised to ensure that they do not play with the

appliance.

- Do not block the air inlet and outlet, e.g. by placing items on the air

outlet or in front of the air inlet.



- This appliance is not a substitute for proper ventilation, regular vacuum

cleaning or use of an extractor hood or fan while cooking.

- If the wall socket used to power the appliance has poor connections,

the plug of the appliance may become hot. Make sure you plug the

appliance into a properly connected wall socket.

- Always place and use the appliance on a dry, stable, level and horizontal

surface.

- Leave at least 20cm free space behind and on both sides of the

appliance and leave at least 30cm free space above the appliance.

- Do not place anything on top of the appliance and do not sit on the

appliance.

 7

- Do not place the appliance directly below an air conditioner to prevent

condensation from dripping onto the appliance.

- Make sure all lters are properly installed before you switch on the

appliance.

- Only use the original Philips lters specially intended for this appliance.

Do not use any other lters.

- Avoid knocking against the appliance (the air inlet and outlet in

particular) with hard objects.

- Always lift or move the appliance by the handgrip at the back of the

appliance.

- Do not insert your ngers or objects into the air outlet.

- Do not use this appliance when you have used indoor smoke-type

insect repellents or in places with oily residues, burning incense or

chemical fumes.

- Do not use the appliance near gas appliances, heating devices or

replaces.

- Always unplug the appliance after use and before you clean it.

- Do not use the appliance in a room with major temperature changes,

as this may cause condensation inside the appliance.

- To prevent interference, place the appliance at least 2m away from

electrical appliances that use airborne radio waves such as TVs, radios

and radio-controlled clocks.

- When the air purier is not used for a long time, bacteria may grow on

the lters. Check the lters after a long period of disuse. If the lters

are very dirty, replace them (see chapter ‘Filter replacement’).

- The appliance is only intended for household use under normal

operating conditions.

- Do not use the appliance in wet surroundings or in surroundings with

high ambient temperatures, such as the bathroom, toilet or kitchen.

- The appliance does not remove carbon monoxide (CO) or radon

(Rn). It cannot be used as a safety device in case of accidents with

combustion processes and hazardous chemicals.



This Philips appliance complies with all standards regarding electromagnetic

elds (EMF). If handled properly and according to the instructions in this

user manual, the appliance is safe to use based on scientic evidence

available today.





The appliance comes with all lters tted inside, but you have to remove

the packaging of the lters before you can use the appliance. Remove all

lters, unpack them and place them back into the appliance as described

below.

Tip: Place the appliance against a wall for more stability when you remove or

insert lters.

Note: Make sure you insert the lters in the correct position.

8

1 Place your ngers in the recesses of the side panels and gently pull

the bottom of the front panel towards you. Then lift the hooks at the

top of the panel out of the top of the appliance.

2 To remove the pre-lter, grab the two projections and pull the lter

towards you.

3 Remove all other lters from the appliance.

4 Remove all packaging material from the lters.

5 Put lter 4 (HEPA lter) back into the appliance.

Note: Make sure that the side with the tag points towards you.

English 9

6 Put lter 3 (activated carbon lter) back into the appliance.

7 AC4004 only: attach lter 2 (multi-care lter) to the back of lter 1

(pre-lter).

Note: Make sure that the front of lter 2 (multi-care lter), that is the side with

the tag, points towards the pre-lter.

8 Place lter 1 (pre-lter) in the appliance.

Note: AC4004: make sure the multi-care lter is attached to the back of the

pre-lter.

Note: Make sure that the side with the two projections points towards you.

Note: Make sure that all hooks are properly attached to the appliance.

9 To reattach the front panel, insert the two hooks into the top of

the appliance rst (1). Then push the panel against the body of the

appliance (2).



1 Put the plug in the wall socket

,All lights go on and off twice and you hear a beep.

2 Press the on/off button to switch on the appliance.

10

,The power-on light and one of the AIR QUALITY lights on the

control panel goes on.



Colour Air quality

Blue very good

Deep purple good

Purple fair

Red bad



Colour Air quality

Blue very good

Deep purple good

Red bad

,The appliance automatically starts operating in the auto mode.

To switch off the appliance, press and hold the on/off button again until the

power-on light goes out and unplug the appliance.

Note: When the humidity level in the room is very high, it is possible that

condensation develops on the air quality sensor. As a result, the AIR QUALITY

lights on the control panel may indicate that the air quality is bad even though

the air quality is good. In this case, the auto mode causes the appliance to

run at high fan speed. You can solve this by cleaning the air quality sensor. If

condensation develops frequently during periods of high humidity, we advise

you to use one of the manual speed settings.



When the appliance is switched on, the built-in air quality sensor

automatically measures the ambient air quality. When the auto mode is

activated, the appliance selects the most appropriate fan speed for the

measured air quality.

Note: When you use the auto mode, you can also use the timer function (see

section ‘Timer function in this chapter). In this case, the AUTO light, one of the

FAN SPEED lights, the TIMER light and one of the HOUR lights are on.

1 Press the on/off button to switch on the appliance.

,The appliance automatically starts operating in the auto mode.

 11

Theairqualitylightringshowsthequalityoftheair.

Air quality indication

Colour Airquality

Blue very good

Deep purple good

Purple fair

Red bad

To switch off the air quality light ring, press the AIR QUALITY button.

Note:The air quality light ring automatically goes on when the appliance is

switched on.

 TheapplianceautomaticallystartsoperatingintheAUTOmode.

To switch off the appliance, press the on/off button again and unplug the

appliance.

Note:When the humidity level in the room is very high, it is possible that

condensation develops on the air quality sensor.As a result, the AIR QUALITY

light on the control panel and the air quality light ring may indicate that the

air quality is bad even though the air quality is good. In this case, the auto

mode causes the appliance to run at high fan speed.You can solve this by

cleaning the air quality sensor. If condensation develops frequently during

periods of high humidity, we advise you to use one of the manual speed

settings.

Fan speed lights/lter replacement lights

- The lights on the right-hand side of the control panel have a dual

function: they either indicate the fan speed or they indicate that the

lters should be replaced or cleaned.

- When lights 1 to 3/4 light up continuously, they indicate the current fan

speed.

- When light 1 ashes, you have to clean the pre-lter. When lights 2

and/or 3/4 ash, you have to replace these lters. If lights 2 and/or

3/4 ash, the REPLACE FILTER light also ashes (see chapter ‘Filter

replacement’ for more information).

- When lights 2, 3/4 and the REPLACE FILTER light are on continuously,

the appliance is locked (see chapter ‘Filter replacement lock’ for more

information).

Adjusting the air quality sensor sensitivity

People with certain health problems (e.g. allergies or asthma) have a

greater need for healthy air. For this reason, the appliance allows you to

ENGLISH 11

AC4072-4074_um_120424.indd 13 24/04/2012 15:47:31

Note: When the appliance is operating in another mode and you want to

activate the auto mode, simply press the AUTO button.

,The AUTO light and one of the FAN SPEED lights go on. The FAN

SPEED light indicates at which fan speed the appliance is operating.

Note: When the air quality is very good and the fan speed operates at a very

low fan speed, the FAN SPEED light for the lowest speed level does not go on.

In this case only the power-on light and the AUTO light are on.

Note: The built-in air quality sensor measures the air quality and automatically

selects the appropriate speed setting to ensure the best possible air quality in

your room. When the air is clean, the appliance stops running. When the air

quality deteriorates, the appliance starts running at a low fan speed and noise

level so that the energy consumption is minimised.



If you do not use the auto mode, you can select the desired fan speed

yourself.

Note: When you manually select a fan speed, you can also use the timer

function (see section ‘Timer function in this chapter). In this case, one of the

FAN SPEED lights, the TIMER light and one of the HOUR lights are on.

1 Press the on/off button to switch on the appliance.

2 Press the FAN SPEED button one or more times to select the

desired fan speed.

,The corresponding FAN SPEED light shows the set fan speed.



With the timer function, you can let the appliance operate for a

set number of hours. When the set time has elapsed, the appliance

automatically switches off.

You can use the timer function in a number of situations:

- In combination with the AUTO mode (see section ‘Auto mode’ in this

chapter). In this case, the AUTO light, one of the FAN SPEED lights, the

TIMER light and one of the HOUR lights are on.

12

- When you choose a fan speed manually (see section ‘Fan speed’ in this

chapter). In this case, one of the FAN SPEED lights, the TIMER light and

one of the HOUR lights are on.

- In combination with the SLEEP mode (see section ‘Sleep mode’ in this

chapter). In this case, the SLEEP light and one of the HOUR lights are

on (but dimmed).

1 Press the on/off button to switch on the appliance.

2 Press the TIMER button to activate the timer.

,The TIMER light goes on.

3 Press the TIMER button repeatedly to choose the number of hours

you want the appliance to operate.

,The corresponding HOUR light goes on.

To deactivate the timer function, press the TIMER button repeatedly until

the HOUR light and the TIMER light are out.



When you use the appliance in sleep mode, it operates very quietly and all

the lights that are on are dimmed, to allow you to sleep undisturbed.

Note: When you use the sleep mode, you can also use the timer function (see

section ‘Timer function in this chapter). In this case, the SLEEP light and one of

the HOUR lights are on (but dimmed).

1 Press the on/off button to switch on the appliance.

2 Press the SLEEP button to activate the quiet sleep mode.

,The SLEEP light goes on.

,All other lights are off, except one of the HOUR lights if you have

activated the timer function.

If you want to go back to the fan speed mode or auto mode, simply press

the FAN SPEED or AUTO button. The sleep mode is then deactivated.



People with certain health problems (e.g. allergies or asthma) have a

greater need for healthy air. For this reason, the air purier allows you to

adjust the sensitivity of the air quality sensor. When it is set to a higher

sensitivity level, the appliance already starts cleaning the air at lower

pollution levels to make the air even cleaner.

There are 3 sensitivity levels:

 13

Otros manuales para AC4002

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Purificador de aire de Philips

Philips

Philips AC4012 Manual de usuario

Philips

Philips 2000 series Manual de usuario

Philips

Philips AC4075 Manual de usuario

Philips

Philips AC4004 Manual de usuario

Philips

Philips AC4012 Manual de usuario

Philips

Philips BiPAP A30 Manual de usuario

Philips

Philips AC4004 Manual de usuario

Philips

Philips AC2889/90 Manual de usuario

Philips

Philips AC4558/31 Manual de usuario

Philips

Philips 6000i Series Manual de usuario

Philips

Philips AC2887/30 Manual de usuario

Philips

Philips AC4072 Manual de usuario

Philips

Philips AC4083 Manual de usuario

Philips

Philips AC4004 Manual de usuario

Philips

Philips AC8688 Manual de usuario

Philips

Philips AC4081/80 Manual de usuario

Philips

Philips GoPure GP5211 Manual de usuario

Philips

Philips UVCA200 Manual de usuario

Philips

Philips AC1380 Manual de usuario

Philips

Philips AC2885/40 Manual de usuario

Philips

Philips AC1217 Manual de usuario

Philips

Philips TY5080 Manual de usuario

Philips

Philips 2000i Series Manual de usuario

Philips

Philips AC0819/90 Manual de usuario

Manuales populares de Purificador de aire de otras marcas

IKEA

IKEA UPPÅTVIND Manual de usuario

Nash

Nash AP-1 PureSmart Manual de usuario

LG PH-U450 Series Manual de usuario

DeLonghi

DeLonghi DDSX 220WFA Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Manual de usuario

Sharp

Sharp FU-40SE Manual de usuario

Hitachi

Hitachi EP-A3000 Manual de usuario

TruSens

TruSens Z-2000 Manual de usuario

Motorola

Motorola MBP87SN Manual de usuario

Beko

Beko ATP 7100I Manual de usuario

Carrier

Carrier INFINITY 1620 Manual de usuario

AtmosAir

AtmosAir P2002 Manual de usuario

Winix

Winix NK300 Manual de usuario

Friedrich

Friedrich C-90A Instrucciones de funcionamiento e instalación

Surgically Clean Air

Surgically Clean Air JADE2.0 Manual de usuario

Base aire

Base aire 555 Pro Manual de usuario

Champion

Champion CP25 Manual de usuario

vollara

vollara Air & Surface Pro+ Manual de usuario