Phantom REACTOR Manual de usuario
USER MANUAL
ENGLISH
— Phantom Reactor is unique. Based on a new and radical architecture, your system features leading-edge
technologies invented by Devialet and protected by over 160 patents. Together, they fuel life into
Phantom Reactor. Inside Phantom Reactor you’ll find the latest-generation ADH®amplification technology
and SAM®signal processing. Our most advanced innovations yet.
You are about to experience and share moments of extraordinary emotion. And this is just the beginning.
Once you’ve finished installing Phantom Reactor, the Devialet app will provide you with permanent updates.
So we can carry on bringing you the best of Devialet.
This guide is designed to take you through setup in a few easy steps. If there’s anything else we can assist you
with, our teams are ready and waiting at help.devialet.com.
This guide is available to download in other languages at devialet.com.
WELCOME
1. GETTING STARTED
2. ABOUT PHANTOM REACTOR
3. PLAYING MUSIC
4. ADVANCED FEATURES
5. DEVIALET APP
6. LEGAL NOTICE
7. SAFETY INSTRUCTIONS
USER MANUAL
P. 4
P. 7
P. 9
P. 13
P. 14
P. 15
P. 16
4
1. ABOUT PHANTOM REACTOR
Indicator light
Bluetooth / Analog/Optical Audio Input
Press and release: switch between Bluetooth and analog/optical input jack
Press and hold: enable Bluetooth pairing mode
Volume
Press to lower/increase volume
Play / Pause
Press and release once quickly: Play / Pause
Link
Press when prompted to do so by the Devialet app
5
Rear button
Press and release for 2 seconds: Standby mode
Press and release once quickly (system in standby mode): Power on
Press and release once quickly (system switched on): Indicates status
Press and release three times quickly: Enable setup mode
Press and hold for 7 seconds: Reset Phantom Reactor.
A/C Input
Connect to a power socket
Analog/optical audio jack
Connect to your TV,
Blu-ray player, MP3 player...
Ethernet
Connect to your router using
an Ethernet cable for greater
network stability.
6
INDICATOR LIGHT
White
Flashing: Phantom Reactor is booting up.
Solid: Phantom Reactor is on and ready for use.
Green
Flashing: Phantom Reactor is preparing for set up / set up has already commenced.
Solid: Phantom Reactor is on and ready for setup.
Blue
Flashing slowly: Bluetooth pairing mode enabled.
Flashes twice: Bluetooth connection successful.
Orange
Flashing: Network connection lost.
Solid: Thermal protection mode on. Please unplug and wait for Phantom Reactor to cool down.
Violet
Solid: Phantom Reactor is performing a factory reset.
7
2. GETTING STARTED
For optimal performance, Phantom Reactor needs to be connected to a Wi-Fi network.
This will enable you to:
— Stream music from online music services (Spotify, Apple Music, TIDAL, Qobuz…)
with the highest possible sound quality, and without draining your battery.
— Ensure your system is kept up to date with the latest software and features.
You can also connect straight to Phantom Reactor via Bluetooth or via the analog/optical audio jack input.
Please refer to the Bluetooth and Analog/Optical Audio Input Jack sections for more details.
— Phantom Reactor
— The supplied power cord
— A mains supply
— A stable Wi-Fi connection with access to high-speed Internet
— A smartphone or tablet running on iOS 11 or later or Android 5.0 or later
Please note:
You can also connect Phantom Reactor to your router with an Ethernet cable instead of using a Wi-Fi network.
WHAT YOU NEED
8
1. Connect Phantom Reactor to the mains using the provided power cord.
While Phantom Reactor is booting up, the indicator light will flash continuously.
Once your system is ready for setup, Phantom Reactor will emit a sound.
This can take up to 1 minute.
2. Download the Devialet app from the App Store (iOS) or Google Play (Android)
using your smartphone or tablet.
3. Launch Devialet app and follow in-app instructions to complete your setup.
Please note:
— For each new Phantom Reactor you wish to add, please repeat steps 1. and 3. above in the Devialet app,
select “Settings” , then “Add a new product” and follow the instructions.
— Not your first time launching Phantom Reactor?
Follow the instructions in the Enable manual setup section to reconnect.
SETTING UP PHANTOM REACTOR
If you encounter any diculties during the installation of your product, you can:
— Perform a complete reset of Phantom Reactor by pressing and holding the back button for seven seconds.
Be sure to wait until until the light turns violet before releasing the button.
— Contact Devialet’s customer service by email or phone at help.devialet.com
9
3. PLAYING MUSIC
Phantom Reactor lets you enjoy your music in a variety of ways.
We recommend the following depending on your preferred
sources and listening habits.
Please refer to the corresponding section for detailed tutorials
on each use case.
We recommend:
Spotify Connect
We recommend:
1. AirPlay®
2. Bluetooth
3. UPnP
We recommend:
1. AirPlay®(iOS / macOS users only)
2. Bluetooth
We recommend:
Analog/Optical
Audio Input Jack
E.g. audio files on your phone,
computer, NAS...
E.g. Apple Music, Tidal, Qobuz,
Deezer, SoundCloud, YouTube…
E.g. TV, Blu-ray player,
MP3 player…
WHAT DO YOU LISTEN TO?
LOCALLY-STORED MUSIC
STREAMING SERVICES
AUDIO DEVICE
10
Once Phantom Reactor is up and running on your network, you can stream music via Wi-Fi.
Make sure the device you want to stream from (smartphone, laptop, tablet…)
is connected to the same network as Phantom Reactor.
Control your music straight from the Spotify app and enjoy the full Spotify catalog using the Spotify app as a remote.
Listen out loud with Spotify Connect
1. Connect your Phantom Reactor to your wifi network.
2. Open up the Spotify app on your phone, tablet or laptop using the same wifi network.
3. Play a song and select Devices Available.
4. Select your Phantom Reactor and start listening.
ONLINE
SPOTIFY CONNECT
AIRPLAY®
Use AirPlay®to listen to music from any source on Phantom Reactor via an iOS, macOS-enabled device,
or any compatible app.
1. Play a track in your favorite music app.
2. Tap the AirPlay®button To choose from Airplay®-enabled systems.
3. Select Phantom Reactor and enjoy.
Listen to your favorite locally-stored tracks on Phantom Reactor via UPnP.
1. Launch your UPnP controller from app (e.g. AllConnect, BubbleUPnP…).
2. Select Phantom Reactor from the list of UPnP renderers.
3. Play a track and enjoy.
UPNP
Otros manuales para REACTOR
1
Tabla de contenidos
Otros manuales de Oradores de Phantom
