PERMASTEEL PS-205 Manual de usuario
1
Wood Grain Style
Steel 80QT Cooler
Use & Care Guide
Model number: PS-205
Thank you for purchasing your new patio cooler from Permasteel.
We hope you enjoy your product.
If you have any questions, please call us (888)-287-0735
or visit www.permasteel.life
2
Table of content
Important Information 2
Parts List 3
Hardware 4
Assembly Steps 5
Care & Maintenance 11
Limited Warranty Information 11
Important
Information
Thank you for your purchase of our Patio Cooler.
We sincerely hope you will enjoy using our fine
products.
•Please take time to read these instructions
thoroughly and follow each step carefully for
safe and easy operation.
•Please contact our customer service at
888-287-0735 if you have any questions.
•Please keep this manual for future reference.
CAUTION
1. Hand tools only, use of power tools could
damage product.
2. Remove all components, hardware and tools
from box before assembly. Inventory and separate
each of the hardware and components included.
3. Please consider recycling all applicable
packaging material.
3
Parts List
Key Description Qty
A Lid Knob 2
B Lid 1
C Body Handle 2
D Body (Basin) 1
E Bottle Opener 1
F Bottle Cap Catcher 1
G Leg Frame 2
H Bottom Shelf 1
I Caster 2
J Caster with Brake 2
AA M6 x 13 Bolt 10
BB M6 x 20 Bolt 4
CC M6 x 16 Bolt 4
DD M5 x 15 Shoulder Bolt 2
EE M4 x 30 Screw 2
If you are missing any parts or have damaged
parts, please call 888-287-0735 M-F 8:00-5:00
Pacific Time. For replacement, visit us at
www.permasteel.life
4
Hardware
The following hardware is provided in a poly bag.
M6x13mm Bolt: 10 pcs
M6x20mm Bolt: 4 pcs
M6X16mm Bolt: 4 pcs
M6x15mm Shoulder Bolt: 2 pcs
M4X32mm Screw: 2 pcs (Note: Attached to lid knobs)
Tools Included:
Tools
The following tools are required for assembly:
•Allen wrench (provided)
•Open end wrench (provided)
•Phillips screwdriver (not provided)
5
Assemble Steps
Step 1
•Turn body (basin) upside down, place it on a clean, soft surface and attach 2 leg frames (G) to body (D)
with (4) M6x13mm bolts (AA) for each leg frame, a total of 8 bolts.
Note: Do not fully tighten the bolts. Leg frames should be loose so as to be able to lineup the holes for
the bottom shelf.
6
Step 2:
•Attach the bottom shelf (H) to the leg frames (G) with (4) M6x20mm bolts (BB).
Note: Do not fully tighten the bolts until the bottom shelf is lined up with the holes for the leg frames.
•Now, tighten all the bolts left loose from step 1.
7
Step 3
•Insert casters (I & J) into the leg frame holes and thread them into each leg frame using the provided
open end wrench.
8
Step 4
•Attach the body handles (C) to body (D) using (4) M6x16mm bolts (CC), 2 bolts for each handle, and
tighten with the provided Allen wrench.
9
Step 5
•Attach the bottle opener (E) to body (D) using (2) M6x13mm bolts (AA) and tighten with the Allen
wrench.
•Attach the cap catcher (F) to body (D) using (2) M6x15mm shoulder bolts (DD).
10
Step 6
•Note: The lid knobs (A) are pre-attached to the lid (B). They are upside down.
•Please remove the knobs using a Phillips head screwdriver and re-assemble them on
the lid right-side up.
Tabla de contenidos
Otros manuales de Accesorios de PERMASTEEL
PERMASTEEL
PERMASTEEL PS-209-80QT Manual de usuario
PERMASTEEL
PERMASTEEL PS-207-80QT Manual de usuario
PERMASTEEL
PERMASTEEL PS-209 Manual de usuario
PERMASTEEL
PERMASTEEL PS-203-80QT Manual de usuario
PERMASTEEL
PERMASTEEL PS-206-SS Manual de usuario
PERMASTEEL
PERMASTEEL PS-207-80QT Manual de usuario
PERMASTEEL
PERMASTEEL PS-207 Manual de usuario
PERMASTEEL
PERMASTEEL 80QT Manual de usuario
PERMASTEEL
PERMASTEEL 80QT Manual de usuario
PERMASTEEL
PERMASTEEL PS-206-SS Manual de usuario
