PerkinElmer OPERA PHENIX PLUS Manual de usuario

OPERA PHENIX®PLUS

Site Readiness

Release History

Revision Publication Date

B 2020-10-20

Service Contact

Information: http://www.cellularimaging.com

Portal: https://evoportal.perkinelmer.com

Notices

The information contained in this document is subject to change without notice.

Except as specifically set forth in its terms and conditions of sale, PerkinElmer makes no

warranty of any kind with regard to this document, including, but not limited to, the

implied warranties of merchantability and fitness for a particular purpose.

PerkinElmer shall not be liable for errors contained herein for incidental consequential damages in

connection with furnishing, performance or use of this material.

This document contains proprietary information that is protected by copyright. All rights are

reserved. No part of this publication may be reproduced in any form whatsoever or translated into

any language without the prior, written permission of PerkinElmer, Inc.

Trademarks

Registered names, trademarks, etc. used in this document, even when not specifically marked as

such, are protected by law.

PerkinElmer is a registered trademark of PerkinElmer, Inc.

Opera Phenix is a registered trademark of PerkinElmer, Inc.

Harmony is a registered trademark of PerkinElmer, Inc.

plate::handler is a trademark of PerkinElmer, Inc.

plate::works is a trademark of PerkinElmer, Inc.

Intel is a registered trademark of Intel Corporation

Xeon is a registered trademark of Intel Corporation

Microsoft is a registered trademark of Microsoft Corporation

Internet Explorer is a registered trademark of Microsoft Corporation

Windows and Windows Vista are registered trademarks of Microsoft Corporation

JavaScript is a registered trademark of Sun Microsystems

Contents

1 Introduction 6

2 Requirements 9

2.1 Instrument Overview 10

2.2 Computer (Harmony PC) 11

2.3 Dimensions 12

2.3.1 Installation on PerkinElmer Opera Phenix Heavy Duty Lab Cart 14

2.3.2 Installation on Table (free-standing) 16

2.3.3 Installation with Automation Upgrade 17

2.4 Electrical Requirements 19

2.4.1 Cable Lengths 19

2.4.2 Country Kits 20

2.5 Environmental Requirements 21

2.6 Biosafety 21

2.7 Gas Requirements (optional) 23

2.8 Delivery Requirements 24

2.8.1 General 24

2.8.2 Opera Phenix Plus 24

2.8.3 Automation Upgrade (optional) 25

2.8.4 Automated Incubator (plate::handler system) 26

3 IT Policy 27

3.1 Network Integration 28

3.1.1 Overview 28

3.1.2 Simple Integration 29

3.1.3 Alternative Solutions 30

3.1.4 Automation Upgrade (plate::handler) 32

3.1.5 Columbus 32

3.2 Security Updates / Servicing Channel 35

3.2.1 Microsoft Windows 35

3.2.2 Microsoft Windows 10 IoT Enterprise 2016/2019 LTSC 35

3.2.3 Microsoft SQL Server 36

3.3 Requirements for Harmony Installation on an Office PC 37

3.4 Computer Systems 38

3.4.1 Network 38

3.4.2 Hardware 38

3.4.3 Operating System, Software & Software Applications 39

3.4.4 Data 40

3.4.5 Back Up 40

3.4.6 Security Settings & Anti-Virus Protection 41

3.5 Computer Users 41

3.6 Remote Support 42

4 Confirmation Fax/Email 43

Opera Phenix Plus – Site Readiness 5

1 Introduction

6 Opera Phenix Plus – Site Readiness

This document describes the dimensions, installation and IT requirements of the

Opera Phenix Plus®Plus High Content Screening System.

Order Review

Please review this order. Record any discrepancies between the PerkinElmer order

and your purchase order, along with any agreements or commitments made by your

PerkinElmer sales representative that are NOT listed on the order. Let your sales

representative know about these discrepancies and/or commitments with your Site

Readiness confirmation.

Notice

The last page of this document needs to be filled and sent back to

your PerkinElmer Sales Representative via fax/email. The Opera

Phenix Plus will not be shipped until confirmation fax/email has been

received by PerkinElmer.

The Way of Your Opera Phenix Plus

1. Manufacturing of main unit: To achieve maximum robustness, the basic unit of

your Opera Phenix Plus is manufactured within a small series.

2. You receive the Site Readiness document.

3. Customization: Your Opera Phenix Plus is equipped with the features you

ordered.

4. Internal Acceptance Test (IAT)

To assure that all components of your Opera Phenix Plus work within the

specifications, the performance of the whole system is checked thoroughly.

5. Packaging: All devices and accessories are packed in specially designed

transport boxes.

6. You send the Site Readiness confirmation form to PerkinElmer.

7. Pick up: The packed Opera Phenix Plus is picked up by our co-operating shipper.

8. Delivery to you: Direct transport by truck or transport by air cargo.

9. Setting up by Service: Your system is unpacked, installed and set up by

PerkinElmer Service.

10. Site Acceptance Test (SAT)

Our Field Service engineer will test the instrument in order to ensure that its

performance meets manufacturing specifications.

Note: The SAT procedure is not intended as a substitute for an IQ/OQ

qualification process.We will not provide an IQ/OQ qualification document for the

Opera Phenix Plus instrument.We recommend a PerkinElmer service contract

for keeping up and confirming of proper functionality of the instrument during its

life time.

11. Familarization: After an introduction and device familarization by our Field

Service engineer you can start working with your new Opera Phenix Plus.

12. On-site user training: We offer an additional advanced user training upon request.

1 Introduction

Opera Phenix Plus – Site Readiness 7

2 Requirements

Opera Phenix Plus – Site Readiness 9

2.1 Instrument Overview

Base Instrument

1. Controls and connections (left)

Network connection, power switch

2. Status display

3. Lid

Access to objectives and sample

chamber

4. Transfer position

Load/eject sample plate

5. Front door

Access to bottles of water immersion

system / humidity control

6. Controls and connections (right)

Manual release for lid, CO2connection,

mains connection, fuses

Optional Pipettor

1. Pipettor housing front door

Access to pipettor, instrument deck

and instrument lid

2. Pipettor housing side door

Access to transfer positions and tip

boxes (also by robot in case of

automated env.)

3. Pipettor head

4. Status display

5. Reagent reservoirs

6. Tip disposal

7. Transfer positions and tip boxes

8. Instrument deck and instrument lid

2 Requirements

10 Opera Phenix Plus – Site Readiness

Tabla de contenidos

Otros manuales de Equipo de laboratorio de PerkinElmer

PerkinElmer

PerkinElmer TITAN MPS Manual de usuario

PerkinElmer

PerkinElmer chemagic 360-D Manual de usuario

PerkinElmer

PerkinElmer Lambda 365 Manual de usuario

PerkinElmer

PerkinElmer OPERETTA Manual de usuario

PerkinElmer

PerkinElmer Lambda 650 Instrucciones de instalación

PerkinElmer

PerkinElmer Spotlight 150 Manual de usuario

PerkinElmer

PerkinElmer OPTIMA 8000 Manual de usuario

PerkinElmer

PerkinElmer 200A Series Manual de usuario

PerkinElmer

PerkinElmer Lambda 25 Manual de usuario

PerkinElmer

PerkinElmer Raman Flex 400 Series Manual de usuario

PerkinElmer

PerkinElmer VesselVue Manual de usuario

PerkinElmer

PerkinElmer Frontier FT-IR Manual de usuario

PerkinElmer

PerkinElmer Wallac 1420 Manual de usuario

PerkinElmer

PerkinElmer FT-IR Manual de usuario

PerkinElmer

PerkinElmer OilExpress System Manual de usuario

PerkinElmer

PerkinElmer TGA 8000 Instrucciones de montaje

PerkinElmer

PerkinElmer Panthera-Puncher 9 Manual de usuario

PerkinElmer

PerkinElmer FLEXAR SQ 300 MS Manual de usuario

PerkinElmer

PerkinElmer TORION T-9 Manual de usuario

PerkinElmer

PerkinElmer Clarus 600/560 D MS Instrucciones de instalación

PerkinElmer

PerkinElmer RamanStation 400 Series Manual de usuario

PerkinElmer

PerkinElmer OMNI International Bead Ruptor 96 Manual de usuario

PerkinElmer

PerkinElmer Panthera-Puncher 9 Manual de usuario

PerkinElmer

PerkinElmer Migele Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario