Perfect Choice PC-112037 Manual de usuario
Welcome to the PERFECT CHOICE Design’s world
Before using this product it is important to read the manual.
Bluetooth® Hi-Fi Speakers 2.0
PC-112037
V.PCD 1.1
Content
• Stereo speakers 1 piece
• AC adapter 1 piece
• RCA/3.5 mm audio cable 1 piece
• Interconnecting cable 1 piece
• User´s manual 1 piece
Features
• Crystal clear sound quality.
• Wooden body for better acoustics.
• Wireless speakers through Bluetooth®
• Bluetooth® compatibility with AVRCP (Audio/Video Remote Control Prole) and
A2DP (Advanced Audio Distribution Prole)
• Compatible with any audio source with 3.5 mm output.
• High aesthetic retro design.
• USB charging port.
Installation
Diagram of buttons, connectors and their functions.
To install, follow the next diagram:
1.Connect the two speakers with the interconnecting cable. In the right speaker
connect the cable marked with ”AUDIO OUTPUT”. Do the same for the left speaker
matching connector colors.
2.Using the audio cable contained in the package, connect your audio source to the
speakers with the cable marked with “AUDIO INPUT”.
3.Connect the power adapter into the connector marked as “DC IN”.
4.Once the speakers are on, you can use the USB port on the back of the speakers
to charge your USB devices.
Wired Audio Playback
Once the installation is completed.
1.Turn on the speakers (Power switch ON/OFF in the “ON”)
2.Connect your audio source to the speakers using the RCA / 3.5 mm audio cable.
You can start playing music in your device.
3.Control the volume with the knob located at the top corner of the right speaker.
The knob is marked with “ – VOLUME +”.
NOTE: Make sure the LED marked with “LINE IN” on the top of the speakers is on.
Bluetooth®Audio Playback
1. Turn on the speakers and wait for the LED marked with “ ”starts blinking in red
and blue.
2. The speakers are ready to synchronize or pair with your Bluetooth® device. To pair
the speakers follow the steps specied in your Bluetooth®, Smartphone or tablet
user manuals.
3. If your device requires a passkey, type “0000” (four zeros).
4. Now your devices should be paired. If not try again steps 1 to 3.
5. Once you are connected to your Bluetooth® device, change the audio source
using the button marked with “Source”. The LED marked with “Bluetooth” should
turn on.
Troubleshooting
The speakers won’t turn on.
• Check the connection between the cables and the power source to validate they
are not loose or disconnected.
The speakers cannot be synchronized or paired with your Bluetooth® device.
• Remember the passkey is “0000” (four zeros)
• Check your Bluetooth® device user manuals to synchronize the device and the
speakers.
The audio source you want to hear cannot be heard.
• Check the audio source you want to hear is the one selected in the speakers.
• If is the Bluetooth® audio source you want to hear, make sure the connection have
not been lost, if so you need to pair the devices again.
Safety and Care Information
• Do no pull or stress the cables, this can damage the cables and cause
malfunction in your devices.
• Avoid spilling liquids over the speakers.
• Handle the speakers carefully, avoid dropping or shock them.
• Do not roll up the AC cable with the audio cables together, this might cause
interference.
•To disconnect, grab the connector on the base and pull it out, do not grab from the
cable in order to pull it out. If you are not going to use the speakers for a long period
of time plug off the AC power.
• Keep the speakers away from direct sunlight, do not place them in high temperature
places, this may damage the speakers or the internal components.
• Clean the speakers with a dry cloth.
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the follow-
ing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
The product comply with the FCC portable RF exposure limit set forth for an uncon-
trolled environment and are safe for intended operation as described in this manual.
The further RF exposure reduction can be achieved if the product can be kept as far
as possible from the user body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Technical Specications
Speakers
Power supply:.............................................................................................18 V 2 A
Output power:....................................................................................................18 W x 2
USB output:..................................................................................................... 5 V 1 A
Frequencies:............................................................................................30 – 20 000 Hz
Bluetooth® version:.....................................................................Bluetooth® 2.1 + EDR
Bluetooth® proles:............................................................................A2DP and AVRCP
Input audio connectors:............................................................................................RCA
Cable type:...............................................................................................RCA – 3.5 mm
AC adapter:
Power supply:..................................................................100 – 240 V 50 - 60 Hz 1 A
Output:..........................................................................................................18 V 2 A
provide a better equipment
Please contact us in case of question or doubts.
Technical Support:
Guadalajara, México y Monterrey
47 77 08 53
Rest of the country (Mexico only)
01 800 PCHOICE (724-6423)
Country of origin: China
MANUAL DE USO
Tabla de contenidos
Idiomas:
