Pepperl+Fuchs F112 Manual de usuario

PMI14V-F112-...-U-...

F112 Inductive Positioning

System

FACTOR AUTOMATION

MANUAL

With regard to the supply of products, the current issue of the following document is ap-

plicable: The General Terms of Delivery for Products and Services of the lectrical Indus-

try, published by the Central Association of the lectrical Industry (Zentralverband

lektrotechnik und lektroindustrie (ZV I) e.V.) in its most recent version as well as the

supplementary clause: " xpanded reservation of proprietorship"

PMI14V-F112-...-U-...

1 Introduction................................................................................. 4

2 Declaration of Conformity.......................................................... 5

3 Safety ........................................................................................... 6

3.1 Used Symbols ...................................................................................... 6

3.2 Intended Use ........................................................................................ 6

3.3 General Safety Instructions................................................................. 6

4 Product Description ................................................................... 8

4.1 Use and Application............................................................................. 8

4.2 Accessories .......................................................................................... 8

4.2.1 Damping lements ............................................................................ 8

4.2.2 Connection Cable with Plug, 3-Wire................................................... 9

5 Installation................................................................................. 10

5.1 Safety Information.............................................................................. 10

5.2 Measuring Range of the PMI14V-...-U-... .......................................... 10

5.3 Preparation ......................................................................................... 11

5.4 Mounting ............................................................................................. 12

5.5 Connection ......................................................................................... 12

6 Commissioning......................................................................... 13

6.1 Commissioning in Line with Default Settings ................................. 13

6.2 Programming the Measuring Range ................................................ 13

6.3 Troubleshooting during Teach-in ..................................................... 14

7 Maintenance and Repair .......................................................... 15

7.1 Maintenance ....................................................................................... 15

8 Troubleshooting........................................................................ 16

8.1 What to Do in the Event of a Fault .................................................... 16

2015-12

PMI14V-F112-...-U-...

Introduction

1 Introduction

Congratulations

You have chosen a device manufactured by Pepperl+Fuchs. Pepperl+Fuchs develops,

produces and distributes electronic sensors and interface modules for the market of

automation technology on a worldwide scale.

Please read the operating instructions carefully before installing this device and putting it into

operation. The instructions and notes contained in this document will guide you step-by-step

through the installation and commissioning procedures to ensure trouble-free use of this

product. By doing so, you:

■

Guarantee safe operation of the device

■

Can utilize the entire range of device functions

■

Avoid faulty operation and associated errors

■

Reduce costs associated with downtime and incidental repairs

■

Increase the effectiveness and operating efficiency of your plant.

Contact

If you have any questions about the device, its functions, or accessories, please contact us at:

Pepperl+Fuchs GmbH

Lilienthalstraße 200

68307 Mannheim

Telephone: +49 621 776-4411

Fax: +49 621 776-274411

-Mail: fa-info@pepperl-fuchs.com

Note!

Store these instructions somewhere safe in order to have them available for future work on the

device.

PMI14V-F112-...-U-...

Declaration of Conformity

2015-12

2 Declaration of Conformity

This product was developed and manufactured under observance of the applicable uropean

standards and guidelines.

The product manufacturer, Pepperl+Fuchs GmbH, D-68307 Mannheim, has a certified quality

assurance system that conforms to ISO 9001.

Note!

A Declaration of Conformity can be requested from the manufacturer.

ISO9001

2015-12

PMI14V-F112-...-U-...

Safety

3 Safety

3.1 Used Symbols

Safety-relevant Symbols

Informative Symbols

Action

This symbol indicates a paragraph with instructions. You are prompted to perform an action or

a sequence of actions.

3.2 Intended Use

The F112 inductive positioning system is optimized for highly accurate, continuous position

detection. Based on the precise evaluation of several coil systems, the device combines a

proven inductive sensor with innovative microcontroller technology. The compact design of the

F112 enables position detection tasks to be carried out in a noncontact, wear-free process to a

measuring length of 14 mm, even in confined installation locations.

Only use recommended original accessories.

3.3 General safety instructions

Responsibility for planning, assembly, commissioning, operation, maintenance, and

dismounting lies with the plant operator.

Installation and commissioning of all devices must be performed by a trained professional only.

User modification and or repair are dangerous and will void the warranty and exclude the

manufacturer from any liability. If serious faults occur, stop using the device. Secure the device

against inadvertent operation. In the event of repairs, return the device to your local

Pepperl+Fuchs representative or sales office.

Danger!

This symbol indicates an imminent danger.

Non-observance will result in personal injury or death.

Warning!

This symbol indicates a possible fault or danger.

Non-observance may cause personal injury or serious property damage.

Caution!

This symbol indicates a possible fault.

Non-observance could interrupt the device and any connected systems and plants, or result in

their complete failure.

Note!

This symbol brings important information to your attention.

Note!

The optimum measurement accuracy is achieved at an actuator distance of 1 mm ... 2 mm.

PMI14V-F112-...-U-...

Safety

2015-12

Note!

Disposal

lectronic waste is hazardous waste. When disposing of the equipment, observe the current

statutory requirements in the respective country of use, as well as local regulations.

2015-12

PMI14V-F112-...-U-...

Product Description

4 Product Description

4.1 Use and Application

The PMI14V-F112-...-U-... inductive positioning system is optimized for highly accurate,

continuous position detection.

Based on the precise evaluation of several coil systems, the device combines a proven

inductive sensor with innovative microcontroller technology.

The compact design of the F112 enables position detection tasks to be carried out in a

noncontact and wear-free process to a measuring length of 14 mm. This includes installation

locations where space is limited.

With its integrated temperature compensation feature, the inductive positioning system is ideal

for use in harsh environments and for critical positioning tasks.

Due to the inductive functional principle, ferrites or magnets are not necessary as a

counterpart. As is the case with an inductive proximity switch, the damping element can be

made of any type of metal.

The benefits of the PMI14V-F112-...-U-... inductive positioning system include:

■

High resolution and accuracy

■

Minimal temperature drift

■

Noncontact operation

■

Measuring range that can be taught in

■

Minimal susceptibility to interference due to the inductive functional principle

The PMI14V-F112-...-U-... inductive positioning system delivers a voltage signal between 0 V

... 10 V at the output that is proportional to the position of the damping element.

4.2 Accessories

Various accessories are available.

4.2.1 Damping lements

We recommend using either the BT-F90-W or BT-F90-G damping element.

BT-F90-W Material: ST37 steel

ø 4,2

108

PMI14V-F112-...-U-...

Product Description

2015-12

Using our Own Damping Element

In principle, it is possible to use your own damping element. The damping element must have

the following properties to be able to make use of the sensor's specified accuracy:

Material: construction steel such as S235JR+AR (previously St37-2)

Dimensions as per BT-F90-W (L x W x H): ≥ 18 mm x 8 mm x ≥ 4 mm

Alternatively, the element must have the same dimensions as the BT-F90-G damping element.

4.2.2 Connection Cable with Plug, 3-Wire

Below is a list of 3-wire female single-ended cordsets with a core cross-section of 3 x 0.25 m

suitable for establishing the electrical connection for PMI14V-F112-...-U-... devices:

Other lengths on request.

BT-F90-G Material: ST37 steel

12 5

ø 4.2

Note!

The exact width of the damping element of 8 mm must be observed. If the width of the damping

element deviates from this value, the position values will differ.

Type Straight Right angle Cable Lengths

V3-GM-2M-PVC X 2 m

V3-WM-2M-PUR X 2 m

V3-GM-5M-PVC X 5 m

V3-GM-5M-PUR X 5 m

V3-WM-2M-PVC X 2 m

V3-WM-2M-PUR X 2 m

V3-WM-5M-PVC X 5 m

V3-WM-5M-PUR X 5 m

2015-12

PMI14V-F112-...-U-...

Installation

5 Installation

5.1 Safety Information

5.2 Measuring Range of the PMI14V-...-U-...

General

On delivery, the measuring range of the PMI14V-F112-...-U-... is 14 mm. This is indicated by

the framed area at the front of the inductive positioning system.

It is possible to reduce the measuring range by parameterizing the sensor. When adjusting the

measuring range, the end point of the sensor is fixed; it is the starting point of the measuring

range that can be changed.

Figure 5.1

The starting point can be taught in within a range of 0 mm to 7 mm

Caution!

Risk of short circuit

Carrying out work while the system is energized may result in damage to the device.

■

Always disconnect the supply voltage before carrying out work on the device.

■

Only connect the device to the supply voltage once all work has been completed.

[V]Voltage at the analog output in volts

Pos.

[mm]

Position of the actuator in mm

0 7 14 Pos. [mm]

Uo[V]

Prog.

0V 10V

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipos industriales de Pepperl+Fuchs

Pepperl+Fuchs

Pepperl+Fuchs KFU8-DW-1.D Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs RSD-CFA-CN Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs PGV -F213-B16-1.5M Series Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs KT-SRT-FF Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs MLV12-54-LAS-300/76b/95 Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs PGV F200A Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs VisuNet Control Center 6 Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs VisuNet EX2 GMPRM/PC 3700 Series Manual

Pepperl+Fuchs

Pepperl+Fuchs Bebco EPS 6100 Series Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs FieldConnex KFD2-BR-1.PA.1500 Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs DAD10-8P Series Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs R2-SP-IC Series Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs R2-SP-N Series Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs KCDO-LGH Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs WITTSensoric LIGI-01 Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs 1001A Series Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs PXV100AQ-F200-R4-V19 Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs PGV100RS-F200-B16-1,5M Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs KCD2-SLD-Ex1.1045 Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs KFD2-CD-1.32 Series Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs FD0-VC-Ex4.FF Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs PCV F200-B6-V15B Series Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs PGV100R-F200-R4-1.5M Manual de usuario

Pepperl+Fuchs

Pepperl+Fuchs LGS Series Manual de usuario

Manuales populares de Equipos industriales de otras marcas

ABB

ABB Unifix AD Manual

Mark 7

Mark 7 Evolution Manual de usuario

Husky

Husky HyPET Manual de usuario

bora

bora PM-1800 Manual de usuario

Grizzly

Grizzly T32428 Manual de usuario

Siemens

Siemens 8MF1 Series Manual de usuario

ABB

ABB HT610965 Manual de usuario

ABB

ABB SafeLink Manual de usuario

Phoenix

Phoenix PHX-150 Manual de usuario

ABB

ABB A165-L32 Manual de usuario

ABB

ABB HT842936 Manual de usuario

Rioned

Rioned UrbanJet Manual de usuario

Hermetica

Hermetica 10 Series Manual de usuario

HORNER

HORNER OEE Solution Manual de usuario

Hammerhead

Hammerhead HG375 Manual de usuario

SCHUNK

SCHUNK VERO-S NSE-A3 138 Instrucciones de uso

ABB

ABB HT566657 Manual de usuario

Webasto

Webasto GSE CAN Manual de usuario