Pentair PUMP Manual de usuario

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

Installation

and

User's Guide

SuperFlo™

High Performance Pump

This document is subject to change without notice.

1620 Hawkins Ave., Sanford, NC 27330 • (919) 566-8000

10951 West Los Angeles Ave., Moorpark, CA 93021 • (805) 553-5000

Trademarks and Disclaimers: SuperFlo is a trademark of Pentair Water Pool and Spa, Inc. The Pentair Pool Products logo is a registered trademark

of Pentair Water Pool and Spa, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks

and names or their products. Pentair Water Pool and Spa, Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

P/N 350096 Rev. B 4/28/06

Customer Service

Patent D517,570

SOURCE ONE OUTLET, INC.

6315 B Transit Road

Depew, NY 14043

866-262-6845

www.source1outlet.com

SuperFlo Pump Installation and User’s Guide

Table of Contents

Important Safety Precautions .............................................................................................. ii

Section 1: Introduction .....................................................................................................1

SuperFlo Pump Overview ....................................................................................... 1

General Features..................................................................................................... 2

Section 2: Electrical Requirements ................................................................................. 3

Wiring Installation..................................................................................................... 3

Pump Strainer Basket ............................................................................................. 4

Section 3: Maintenance ..................................................................................................... 5

Cleaning the Pump Strainer Basket ........................................................................ 5

Winterizing ............................................................................................................... 6

Electric Motor Care .................................................................................................. 6

Section 4: Servicing .......................................................................................................... 7

Pump Disassembly ................................................................................................. 7

Pump Reassembly/Seal Replacement .................................................................... 8

Shaft Seal ................................................................................................................ 8

Section 5: Restart Instructions ........................................................................................ 9

Priming the Pump .................................................................................................... 9

Section 6: Troubleshooting .............................................................................................. 10

Section 7: Technical Data .................................................................................................. 11

Replacement Parts .................................................................................................. 11

Pump Curve ............................................................................................................ 12

SuperFlo Pump Installation and User’s Guide

IMPORTANT SAFETY PRECAUTIONS

Consumer Information and Safety

The SuperFlo pumps are designed and manufactured to provide many years of safe and reliable service when installed,

operated and maintained according to the information in this manual and the installation codes referred to in later

sections. Throughout the manual, safety warnings and cautions are identified by the “ “ symbol. Be sure to read and

comply with all of the warnings and cautions.

DANGER —Risk of electrical shock or electrocution.

This pool pump must be installed by a licensed or certified electrician or a qualified pool

serviceman in accordance with the National Electrical Code and all applicable local codes

and ordinances. Improper installation will create an electrical hazard which could result in

death or serious injury to pool users, installers, or others due to electrical shock, and may

also cause damage to property.

Always disconnect power to the pool pump at the circuit breaker before servicing the pump.

Ensure that the disconnected circuit is locked out or properly tagged so that it cannot be

switched on while you are working on the pump. Failure to do so could result in serious injury

or death to serviceman, pool users or others due to electric shock.

WARNING — Hazardous Pressure!

This pump produces high pressure. Air can enter the circulation system and become

pressurized. Pressurized air can cause equipment lids (pump, filter, valves, etc.) to blow off.

Always turn off the pump and relieve pressure before opening lids. Failure to do so could

result in serious injury or death to installers, pool users or others and may also cause

damage to property.

Important Notice:

This guide provides installation and operation instructions for the SuperFlo Pump.

Consult Pentair Water with any questions regarding this equipment.

Attention Installer: This guide contains important information about the installation, operation and safe use of

this product. This information should be given to the owner and/or operator of this equipment after installation or left on

or near the pump.

Attention User: This manual contains important information that will help you in operating and maintaining this

pump. Please retain it for future reference.

WARNING —Before installing this product, read and follow all warning notices and instructions which are

included. Failure to follow safety warnings and instructions can result in severe injury, death,

or property damage. Call (800) 831-7133 for additional free copies of these instructions.

iii

SuperFlo Pump Installation and User’s Guide

IMPORTANT SAFETY PRECAUTIONS (continued)

WARNING —Do not operate the pump until you have read and understand clearly all the operating instructions

and warning messages for all equipment that is a part of the pool circulating system. The

following instructions are intended as a guide for initially operating the pump in a general pool

installation, however each installation may have unique conditions where the starting procedure

could be different. Failure to follow all operating instructions and warning messages can result in

property damage or severe personal injury or death.

WARNING — The pump can produce high levels of suction within the suction side of the plumbing system.

These high levels of suction can pose a risk if a person comes within the close proximity of the

suction openings. A person can be seriously injured by this high level of vacuum or may become

trapped and drown. It is absolutely critical that the suction plumbing be installed in accordance

with the latest national and local codes for swimming pools.

WARNING —To reduce the risk of injury, do not permit children to use this product unless they are closely

supervised at all times.

CAUTION — This pump is for use with permanently installed pools and may also be used with hot tubs and

spas if so marked. Do not use with storable pools. A permanently installed pool is constructed

in or on the ground or in a building such that it cannot be readily disassembled for storage. A

storable pool is constructed so that it may be readily disassembled for storage and reassembled

to its original integrity and has a maximum dimension of 18 feet (5.49m) and a maximum wall

height of 42 inches (1.07m).

CAUTION — For hot tubs and spa pumps, do not install within an outer enclosure or beneath the skirt of a hot

tub or spa unless so marked.

General Installation Information

• All SuperFlo models are intended for use in swimming pool applications. The pump will function

correctly only if it is properly sized to the specific application and properly installed.

• When pump is mounted permanently within 5 ft. of the inside walls of a swimming pool, you

MUST use a No. 8 AWG or larger conductor to connect to bonding conductor lug.

SuperFlo Pump Installation and User’s Guide

Section 1

Introduction

SuperFlo™High Performance Pump Overview

The perfect choice for all types of pools, the SuperFlo was specifically designed to be your best choice for

a variety of inground pools. Thick walled body parts, a heavy duty 56 square flange motor, and highly

engineered hydraulics make this rugged and tested design perfect for any pool, spa, water feature, or

fountain. And SuperFlo’s silent running capability and small footprint allow it to easily drop into a compact

equipment pad.

Efficient, Quiet, Rugged, and Versatile

All pumps from Pentair Water Pool and Spa incorporate innovative hydraulic engineering that has been

refined for over 40 years. SuperFlo reflects the latest and best Pentair technology, to move water more

efficiently for lower operational costs. Compact, rugged, and easy to maintain, SuperFlo will deliver years

of reliable service.

SuperFlo Pump

SuperFlo Pump Installation and User’s Guide

General Features

• Extremely quiet operation

• Unionized fittings (1.5" and 2") for simple replacement

• Cam and Ramp™ lid for easy cleaning and maintenance

• Heavy-duty, high service factor 56 square flange motor for long life

• Integral volute and pot reduce hydraulic noise

• See-through lid permits easy inspection of strainer basket

Additional Features:

• 115 volt or 230 volt models available

• 1/2 Hp to 2 Hp configurations to accommodate a wide range of applications

• Self-priming for quick, easy start-up

• Every SuperFlo pump is performance and pressure tested prior to shipment to ensure superior quality

• UL/CUL/NSF

SuperFlo Pump Installation and User’s Guide

Section 2

Electrical Requirements

This section describes how to wire the SuperFlo pump.

Note: Before installing this product, read and follow all warning notices and instructions starting

on page ii.

Electrical Requirements and Wiring

When pump is mounted permanently within 5 ft. of the inside walls of a swimming pool, you MUST use a

No. 8 AWG or larger conductor to connect to bonding conductor lug.

Wiring Installation

WARNING —Risk of electrical shock or electrocution.

This pool pump must be installed by a licensed or certified electrician or a qualified pool serviceman

in accordance with the National Electrical Code and all applicable local codes and ordinances.

Improper installation will create an electrical hazard which could result in death or serious injury to

pool users, installers, or others due to electrical shock, and may also cause damage to property.

Always disconnect power to the pool pump at the circuit breaker before servicing the pump.

Failure to do so could result in death or serious injury to serviceman, pool users or others due to

electric shock.

1. Make sure all electrical breakers and switches are turned off before wiring motor.

2. Make sure that the wiring voltage matches the motor voltage (230v or 115v). If they do not match the motor

will burn up.

3. Choose a wire size from the Chart 1. When in doubt use a heavier gauge (larger diameter) wire. Heavier gauge

will allow the motor to run cooler and more efficient.

4. Make sure all electrical connections are clean and tight.

5. Cut wires to the appropriate length so they don’t overlap or touch when connected to the terminal board.

Chart 1.

)GWA(SEZISERIWYLPPUS

)rewopesroHybhtgneLdnaeziS(

pHstlov511stlov032

.tf05.tf001.tf051.tf05.tf001.tf051

3/1414121414141

2/1412101414141

4/3212101414141

121018414141

½101018414121

20188412121

½--- 212101

3--- 212101

SuperFlo Pump Installation and User’s Guide

Wiring Installation, cont.’d.

6. Permanently ground the motor using the green ground terminal located on the inside of the motor canopy or

access plate, see Figure 1. Use the correct wire size and type specified by National Electrical Code. Make sure

the ground wire is connected to an electrical service ground.

7. Bond the motor to the pool structure in accordance with the National Electrical Code. Use a solid No. 8 AWG

or larger copper conductor. Run a wire from the external bonding screw on the motor to the pool bonding

structure.

8. Connect the pump permanently to a circuit. Make sure no other lights or appliances are on the same circuit.

NOTE

It is important that the O-ring be kept clean and well lubricated. We recommend a silicone base lubricant for best results.

The Pump Strainer Basket

This unit, sometimes referred to as the ‘Hair and Lint Pot’, is the unit in front of the volute. Inside the chamber is

the basket which must be kept clean of leaves and debris at all times. View basket through the ‘See Through Lid’

to inspect for leaves and debris.

Regardless of the length of time between filter cleaning, it is most important to visually inspect the hair and lint pot

basket at least once a week. A dirty basket will reduce the efficiency of the filter and heater and also put an

abnormal stress on the pump motor which would result in a costly repair bill.

Ground Screw

Figure 1.

Otros manuales para PUMP

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Bomba de piscina de Pentair

Pentair

Pentair ONGA LEISURETIME LTP400 Manual de usuario

Pentair

Pentair STA-RITE SWIMMEY Series Manual de usuario

Pentair

Pentair INTELLIFLO WHISPERFLOVSD Manual de usuario

Pentair

Pentair Teel 4RJ93 Instrucciones de uso

Pentair

Pentair Sta-rite EnviroMAX 1500 Guía de configuración

Pentair

Pentair EQ SERIES Manual de usuario

Pentair

Pentair STA-RITE DYNA-PRO Manual de usuario

Pentair

Pentair Ultra-Flow Manual de usuario

Pentair

Pentair Sta-Rite EcoSelect Enviromax 800 Manual de usuario

Pentair

Pentair Ultra-Flow Manual de usuario

Pentair

Pentair SWIMMEY Series Manual de usuario

Pentair

Pentair 5P2R Manual de usuario

Pentair

Pentair Pump Eagle Manual de usuario

Pentair

Pentair IntelliFlo VS+SVRS Manual de usuario

Pentair

Pentair ONGA Eco Select PANTERA evolution Manual de usuario

Pentair

Pentair IntelliFlo VF Manual de usuario

Pentair

Pentair SHURflo Manual del propietario

Pentair

Pentair Deck Jet II MagicStream Manual de usuario

Pentair

Pentair OPTIFLO 348195SR Manual de usuario

Pentair

Pentair OptiFlo Manual de usuario

Pentair

Pentair maytronics ecoclear 800-VS Manual de usuario

Pentair

Pentair JWP SERIES Manual de usuario

Pentair

Pentair INTELLIFLO 100 Manual de usuario

Pentair

Pentair silentflo Manual de usuario

Manuales populares de Bomba de piscina de otras marcas

TIP

TIP STEAM 35000 INV Diagrama de cableado

Jacuzzi

Jacuzzi J-HI27C Manual de usuario

PoolRite

PoolRite SQI 400 Manual de usuario

Calpeda

Calpeda NMP Manual de usuario

WilTec

WilTec 50374 Manual de usuario

Evolution

Evolution Evoflow Storm Eco-V Manual de usuario

AquaTools

AquaTools AT240701 Manual de usuario

Sibo

Sibo AquaForte RD352 Manual de usuario

CLS

CLS VICTORIA PLUS SILENT Manual de usuario

Pond One

Pond One Piranha 800 Manual de usuario

Hayward

Hayward VSP Manual de usuario

Resol

Resol DeltaSol B Pro Manual de usuario

Evolution Aqua

Evolution Aqua UniTech Perfect 5000 Manual de usuario

Outside Living Industries

Outside Living Industries Ubbink Heatermax Pool Guía de inicio rápido

CPI

CPI Olympic 2P1815 Manual de usuario

Flotec

Flotec FP6121-01 Manual de usuario

Polygroup

Polygroup SUMMER WAVES SKIMMERPLUS SFX330 Manual de usuario

Sears

Sears 390.26280 Manual de usuario