Pentair INTELLICENTER Manual de usuario

IntelliCenter Control System User’s Guide

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

INTELLICENTER™CONTROL SYSTEM

USER’S GUIDE

FOR POOL AND SPA

Pool Spa Lights

Air Temp 65° F

Schedule Usage Chemistry Status

3 3

8:00 A.M.

6.50

84°

78°

Pool Spa Lights

Air Temp 65° F

Schedule Usage Chemistry Status

3 3

8:00 A.M.

6.50

84°

78°

IntelliCenter Control System User’s Guide

P/N 522990.A 3/2018

Overview 1

Features 1

Navigation 2

Home Screen Connection Indicators 4

Initial System Power Up 4

Display Icon (Day/Night Theme) 5

Manual Control of Equipment and

Functions 5

Pool/Spa System Configurations 6

Passcode Protect 6

IntelliCenter Control System Menu

Structure 7

Home Screen 8

Pool 9

Spa 11

Features 13

Features: Individual / Groups 13

Lights 14

Schedule 19

Schedule - Weekly 20

Schedule - Manual Op Priority 21

Schedule - One Time Only 22

Schedule - Offset

Sunrise/Sunset Time 24

Vacation Mode (see page 38) 25

Usage (Summary View) 26

Usage (Summary View Edit) 27

Usage (Graph Screen) 28

Chemistry 29

IntelliChem/IntelliChlor 29

Chemistry (pH Measurement) 29

Chemistry (ORP Measurement) 30

Chemistry (Water Balance) 31

Chemistry (IntelliChlor SCG) 32

Status 33

Settings 35

Service Mode 37

Vacation Mode 38

Support 39

General 40

Location 40

Date & Time 40

Units 41

Features and Lights List Order 41

Backlight 42

Wireless Remote (Deep Sleep) 42

General List Order 42

Temperature Sensor Calibration 43

Day/Night Themes 44

Manual Operation Priority 44

Manual Heat (ON/OFF) 44

Chemistry Readings Badges 44

Show Badge Colors 44

Alerts and Notifications 45

Security (Passcode Protect) 45

Pentair User Portal 47

Groups (Light/Circuits) 48

CUSTOMER SERVICE / TECHNICAL SUPPORT

Contents

Customer Service

8 A.M. to 7.30 P M — Eastern and Pacific Times

Phone: (800) 831-7133

Fax: (800) 284-4151

Visit www.pentairpool.com

Technical Support

Sanford, North Carolina (8 A.M. to 7.30 P M ET)

Phone: (919) 566-8000

Fax: (919) 566-8920

Moorpark, California (5 A.M. to 4.30 P.M. PT)

Phone: (805) 553-5000 (Ext. 5591)

Fax: (805) 553-5515

IntelliCenter Control System User’s Guide

Groups (Lights) 50

Groups (Feature Circuits) 51

System Reboot 51

Settings (Advanced System

Configuration) 52

Installation Setup 53

Panel Identification 54

Body Configuration

Pool/Spa 53

Expansion Panels 55

Circuits, Feature Circuits,

Groups 56

Feature Circuits 57

Circuit Functions 60

Circuit Names 61

Pumps 62

Pumps (Single Speed) 62

Pumps (Dual Speed) 63

Pumps (IntelliFlo VS) 64

Pumps (IntelliFlo VSF) 66

Pumps (IntelliFlo VF) 68

IntelliFlo Pump Alarms

and Warnings 69

Heaters (Gas) 72

Heater Installation 72

Solar and Heat Pump

Nocturnal Heater Cool

Down Delay 73

Heater (Solar Heating) 74

Heaters Heat Pump

(UltraTemp/Hybrid) 75

Valves 76

Valves (Installation) 76

Optional Expansion Valve 77

Chemistry

IntelliChlor/IntelliChem 78

IntelliChlor SCG 78

IntelliChem 78

Pool/Spa Cover 79

Remotes Setup 80

iS4 Remote 80

QuickTouch II Remote 81

iS10 Remote 82

SpaCommand Remote 83

Network and WiFi Setup 84

IntelliCenter Wireless

Remote Setup 86

Delays 87

System 88

System Information 88

Detected Hardware 88

System Diagnostic 88

Firmware Update 88

Factory Diagnostics 88

Import/Export 89

Import System Config. 89

Export System Config. 90

Restore Factory Defaults 91

Setup Wizard 92-102

IntelliCenter Control System

Remote Access

Instructions 103

Changing the Antenna

Power 104

IntelliCenter Control System

Wireless Connections

Diagram 105

IntelliCenter Control System

Configurations and Models 106

Glossary 108

Contents

IntelliCenter Control System User’s Guide

Before installing this product,

read and follow all warning

Attention Installer: This Installation and User’s

Guide (“Guide”) contains important information

about the installation, operation and safe use of this

underwater pool and spa light. This Guide should be

given to the owner and/or operator of this equipment.

Attention User: This manual contains important

information that will help you in operating and

maintaining this product. Please retain it for future

reference.

SERIOUS BODILY INJURY OR

DEATH CAN RESULT IF THIS

LIGHT IS NOT INSTALLED AND

USED CORRECTLY.

Before working on the

IntelliCenter Control System

always disconnect power to the pool and/or

spa pumps, lights and other electrical devices

at the house circuit breaker. Failure to do

so could result in death or serious injury to

service person, pool users or others due to

electric shock.

This underwater light must be

installed by a licensed or certiﬁed

RISK OF ELECTRICAL SHOCK

OR ELECTROCUTION:

THIS PRODUCT REQUIRES

HIGH VOLTAGE WHICH CAN

SHOCK, BURN, OR CAUSE

DEATH.

Most states and local codes regulate

the construction, installation, and

ATTENTION

operation of public pools and spas, and the construction

of residential pools and spas. It is important to comply

with these codes, many of which directly regulate the

installation and use of this product. Consult your local

building and health codes for more information.

ANSI - American National Standards Institute

ASME - American Society of Mechanical Engineers

CSA - Canadian Standards Association

IAPMO - International Association of Plumbing and

Mechanical Ofﬁcials

UL - Underwriter Laboratory

INSTALLERS, POOL OPERA-

TORS AND POOL OWNERS

MUST READ THESE WARNINGS AND ALL

INSTRUCTIONS BEFORE USING THE POOL AND/

OR SPA LED LIGHT.

IMPORTANT NOTICE

notices and instructions in this Guide. Failure to

follow warnings and instructions can result in severe

injury, death, or property damage. Call (800) 831-

7133 for additional free copies of these instructions.

Please refer to www.pentairpool.com for more

information related to this products.

electrician or a qualiﬁed pool professional in accordance

with the National Electrical Code (NEC), NFPA 70 or

the Canadian Electrical Code (CEC), CSA C22.1.

All applicable local installation codes and ordinances

must also be adhered to. Improper installation will

create an electrical hazard which could result in

death or serious injury to pool users, installers or

others due to electrical shock, and may also cause

damage to property.

Always disconnect the power to the pool light at

the circuit breaker before servicing the light. Failure

to do so could result in death or serious injury to

serviceman, pool users or others due to electrical shock.

ATTENTION

IMPORTANT WARNING AND SAFETY INSTRUCTIONS

IntelliCenter Control System User’s Guide

IMPORTANT WARNING AND SAFETY INSTRUCTIONS

Regulatory Compliance Information

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. See

instructions if interference to radio or television reception is suspected.

Radio and Television Interference

This computer equipment generates, uses, and can radiate radio-frequency energy. If it is

not installed and used properly—that is, in strict accordance with Pentair instructions—it

may cause interference with radio and television reception. This equipment has been

tested and found to comply

with the limits for a Class B digital device in accordance with the specifications in Part

15 of FCC rules. These specifications are designed to provide reasonable protection

against such interference in a residential installation. However, there is no guarantee

that interference will not occur in a particular installation. You can determine whether

your computer system is causing interference by turning it off. If the interference stops, it

was probably caused by the computer or one of the peripheral devices. If your computer

system does cause interference to radio or television reception, try to correct the

interference by using one or more of the following measures:

• Turn the television or radio antenna until the interference stops.

• Move the computer to one side or the other of the television or radio.

• Move the computer farther away from the television or radio.

• Plug the computer into an outlet that’s on a different circuit from the television or radio.

(Make certain the computer and the television or radio are on circuits controlled by

different circuit breakers or fuses.)

If necessary, consult Pentair Technical Support 1.800.731.3773 or consult an experienced

radio/television technician for additional suggestions. Important:

Changes or modifications to this product not authorized by Pentair could void the EMC

compliance and negate your authority to operate the product. This product was tested for

EMC compliance.

IntelliCenter Control System User’s Guide

IMPORTANT WARNING AND SAFETY INSTRUCTIONS

Wireless Radio Use

This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz

frequency range to reduce the potential for harmful interference to

co-channel Mobile Satellite systems.

Cet appareil doit être utilisé à l’intérieur.

Exposure to Radio Frequency Energy

The radiated output power of this device is well below the FCC radio frequency exposure

limits. However, this device should be operated with a minimum distance of at least

20 cm between its antennas and a person’s body, and the antennas used with this

transmitter must not be co-located or operated in conjunction with any

other antenna or transmitter subject to the conditions

of the FCC Grant.

Industry Canada Statement

Complies with the Canadian ICES-003 Class B specifications. Cet appareil numérique

de la classe B est conforme à la norme NMB-003 du Canada. This device complies with

RSS 210 of Industry Canada.

Disposal and Recycling Information

This symbol indicates that your product must be disposed of properly according

to local laws and regulations. When your product reaches its end of life, contact

Pentair Technical Support 1.800.371.7333 or your local authorities to learn about

recycling options.

California: The coin cell battery in your remote contains perchlorates. Special

handling and disposal may apply.

Refer to www.dtsc.ca.gov/hazardouswaste/perchlorate.

The symbol above means that according to local laws and regulations your product

should be disposed of separately from household waste. When this product

reaches its end of life, take it to a collection point designated by local authorities.

Some collection points accept products for free. The separate collection and

recycling of your product at the time of disposal will help conserve natural

resources and ensure that it is recycled in a manner that protects human health

and the environment.

READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL

SAVE THESE INSTRUCTIONS

IntelliCenter Control System User’s Guide

CUSTOMER SERVICE / TECHNICAL SUPPORT

Customer Service

8 AM to 8 PM — Eastern and Pacific Times

Phone: (800) 831-7133

Fax: (800) 284-4151

Visit www.pentairpool.com

Technical Support

Sanford, North Carolina (8 AM to 8 PM)

Phone: (919) 566-8000

Fax: (919) 566-8920

Moorpark, California (5 AM to 5 PM)

Phone: (805) 553-5000

Fax: (805) 553-5515

IntelliCenter Control System User’s Guide

| 1

Welcome! Your Pentair IntelliCenter™ Control System will change the way you

view pool and spa controls. This innovation in pool and spa automation offers

complete freedom for you while having full automation control over your pool, spa,

lights, heater, cleaners and much more. You can now schedule multiple start and

stop times to control your lights, heater, spa jets, and filter pumps. The historical

usage data feature provides a convenient way to help you conserve energy. Using

an iPhone®, iPad®mobile digital device or an Android®wireless device, you can

now control your pool and spa from anywhere inside or outside your home. The

IntelliCenter Control System is a scalable system that can be used with popular

home automation systems.

This manual describes how use the IntelliCenter Control System and associated

equipment.

IntelliCenter™Control System

Overview

• 4” x 3” capacitive touch sensitive color touch screen.

• Day Time and Night Time color screen modes

• Multifunction Schedules/Programs

• Adjustable schedule timer for easy system scheduling

• 100 Schedules/Programs

• 32 Feature Circuits: Allow additional speeds on a variable speed pump or an

actuator to be assigned without using an existing auxiliary circuit.

• 16 Groups: Assign groups of lighting and AUX circuits that can be controlled by

a single button.

• Supports up to 16 IntelliFlo®VF and VS Pumps

• Supports up to four Spa Command®and iS10 Spa Side Remotes, and two iS4

and one QuickTouch®II Wireless Spa Side Remotes

• Supports IntelliBrite®LED Color lights

• Valves: Intake/Return plus A and B valve circuits. Expandable up to 10 valves.

• Indoor Control Panel, Wireless Hand-Held Remote, Outdoor Control Panel

• IntelliChem®Controller

• IntelliChlor®Salt Chlorine Generator: Supports one unit.

• 40 Auxiliary Circuits (up to three Expansion Enclosures)

• Spa Manual Heat Function

• Support for two Bodies of Water

Features

IntelliCenter Control System User’s Guide

2 |

Navigation

Back: Returns to the previous screen. Tap and

hold to return to the Home screen.

Move to next vertical screen (up/down).

Delete an item.

Select and save an item.

Home screen is Locked (passcode protected).

Requires password to access the Home screen.

Edit an item.

Help information. Tap the Help icon to display the

contextual on-screen help information.

Select an item. Add an item. Cancel/Close a screen.

Green: System status is good (OK)

Red: Alert status condition. Note: Badges are displayed

on the Home screen Status icon.

Blue: System Status Information.

Orange: Warning status condition.

• System Reboot from touch screen control panels

• Spa Side Control Enable/Disable

• Solar Heating Option/Support

• 16 Heat Pump Support: RS-485 Support, Heat Pump Cooling Support.

• Safety and Functional Delay(s) and Cancel Systems Delays

• Real Time Clock

• Assignable Circuit Names and Custom Circuit Names

• Special Circuit Functions

• Two Speed Pump Support

• English/Metric Support

• Sensor Calibration

• Passcode Protection

• USB port for use with a standard flash drive. Save the system’s

configuration and upgrade the system’s firmware.

Features (Continued)

Otros manuales para INTELLICENTER

Tabla de contenidos

Otros manuales de Sistema de control de Pentair

Pentair

Pentair SunTouch Manual de usuario

Pentair

Pentair EASYTOUCH PL4 Manual de usuario

Pentair

Pentair SunTouch Manual de usuario

Pentair

Pentair EasyTouch Pool/Spa Control System LX-100EZ Instrucciones de instalación

Pentair

Pentair EasyTouch Manual de usuario

Pentair

Pentair INTELLICENTER Manual de usuario

Pentair

Pentair EasyTouch Manual de instalación y operación

Pentair

Pentair IntelliSync 523404 Manual de usuario

Pentair

Pentair IntelliSync 523404 Manual de usuario

Pentair

Pentair PENTEK DEFENDER CSC-LINK Manual de usuario

Pentair

Pentair SPACOMMAND CP3800 Series Manual de usuario

Pentair

Pentair AUTOTROL 460i Manual de usuario

Pentair

Pentair SCREENLOGIC INTERFACE Manual de usuario

Pentair

Pentair EASYTOUCH PL4 Manual de usuario

Pentair

Pentair INTELLITOUCH Manual de usuario

Pentair

Pentair Pool and Spa Control System SunTouch Manual de usuario

Pentair

Pentair INTELLICONNECT Manual de usuario

Pentair

Pentair Intellitouch ScreenLogic Manual de usuario

Pentair

Pentair EASYTOUCH PL4 Manual de usuario

Pentair

Pentair IntelliCenter 522039Z Manual de usuario

Pentair

Pentair INTELLICENTER Manual de usuario

Pentair

Pentair EasyTouch 8 and 4 Manual de usuario

Pentair

Pentair Hypro ProStop-E Quad 4216N-3404VPSQ Manual de usuario

Pentair

Pentair EasyTouch 8 Manual de usuario

Manuales populares de Sistema de control de otras marcas

Pentair Pool Products

Pentair Pool Products Compool Manual de usuario

ComfortNET

ComfortNET CTK04 Manual de usuario

Fireye

Fireye InSight II 95DSS3 Manual de usuario

CAME

CAME G3000 Manual de usuario

Idemia

Idemia MorphoAccess VP MD Manual de usuario

Axis

Axis P1445-LE-3 Manual de usuario

HEIDENHAIN

HEIDENHAIN TNC 150 B Manual de usuario

CNC-Step

CNC-Step High-Z T-Series Manual de usuario

Doosan

Doosan DVF Series Manual de usuario

Honeywell

Honeywell KAP 140 Manual de usuario

Honeywell

Honeywell vk41 series Manual de usuario

AirBench

AirBench FPW Guía de instalación

Cypress

Cypress HHR-3160 Manual de usuario

CAME

CAME GLT40AOS Manual de usuario

Zonex

Zonex GEN II -VVT Guía del usuario

Altronics

Altronics K 9650 Manual de usuario

micro-trak

micro-trak RoadMaster Manual de usuario

micro-trak

micro-trak Calc-An-Acre II Manual de usuario