Penguin Computing R270-B2O Guía de inicio rápido

IceBreaker 2912/2924

Technical Guide

Rev. 1.0

PENGUIN

COMPUTING

www.penguincomputing.com | 1-888-PENGUIN (736-4846) | twitter:@PenguinHPC

R270-B2O

R270-C3C

Dual LGA2011 sockets R3 motherboard for Intel® E5-2600 V3 series processors

Service Guide

Rev. 1.0

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specifications and features in this manual may be made by GIGABYTE

without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classifications

In order to assist in the use of this product, GIGABYTE provides the following types of documentations:

■For detailed product information, carefully read the User's Manual.

For more information, visit our website at:

http://b2b.gigabyte.com

You are a professional?

Get an access to our complete source of sales, marketing & technical materials at:

http://reseller.b2b.gigabyte.com

https://www.facebook.com/gigabyteserver

Preface

Before using this information and the product it supports, please read the following general infor-

mation.

1. This Service Guide provides you with all technical information relating to the BASIC CON-

FIGURATION decided for GIGABYTE’s “global” product offering. To better fit local market-

requirements and enhance product competitiveness, your regional office MAY have decided

toextend the functionality of a machine (e.g. add-on card, modem, or extra memory capabil-

ity).These LOCALIZED FEATURES will NOT be covered in this generic service guide. In

suchcases, please contact your regional offices or the responsible personnel/channel to

provide youwith further technical details.

2. Please note WHEN ORDERING SPARE PARTS, you should check the most up-to-date

informationavailable on your regional web or channel. For whatever reason, if a part num-

ber change is made,it will not be noted in the printed Service Guide. For GIGABYTE-AU-

THORIZED SERVICEPROVIDERS, your GIGABYTE office may have a DIFFERENT part

number code to thosegiven in the FRU list of this printed Service Guide. You MUST use the

list provided by yourregional GIGABYTE office to order FRU parts for repair and service of

customer machines.

- 4 -

Table of Contents

Box Contents 7

Safety, Care and Regulatory Information 8

Chapter 1 Hardware Installation 11

1-1 Installation Precautions 11

1-2 Product Specifications 12

1-3 System Block Diagram 14

Chapter 2 System Hardware Installation 15

2-1 Removing Chassis Cover 16

2-2 Removing and Installing the Fan Duct 17

2-3 Installing the CPU 18

2-4 Installing the Heat Sink 19

2-5 Installing the Memory 20

2-5-1

2-5-2

2-5-3

Four Channel Memory Configuration 20

Installing a Memory 21

DIMM Population Table 22

2-5 Installing the PCI Expansion Card 23

2-6 Installing the Hard Disk Drive 24

2-7 Replacing the FAN Assemblly 25

2-8 Replacing and Installing the Power Supply 26

Chapter 3 System Appearance 27

1Front View 27

2Rear View 28

3-3 Front Panel LED and Buttons 29

3-4 Rear System LAN LEDs 31

3-5 Hard Disk Drive LEDs 32

3-6 Cable Routing 33

Chapter 4 Motherboard Components 35

4-1 MD60-SC1 Motherboard Components 35

4-2 Jumper Setting 38

Chapter 5 BIOS Setup 40

5-1 The Main Menu 42

5-2 Advanced Menu 45

1Memory Topology 81

2 Memory Thermal 82

3Memory Map 83

5-3-5-4 Memory RAS Configuration 84

5-3-6 IIO Configuration 85

5-3-6-1 IOAT Configuration 86

5-3-6-2 Intel VT for Directed I/O (VT-d) 87

5-3-7 PCH Configuration 88

5-3-7-1 PCH Devices 89

5-3-7-2 PCH sSATA Configuration 90

5-3-7-2-1 SATA Mode Options 93

5-3-7-3 PCH SATA Configuration 95

5-3-7-3-1 SATA Mode Options 98

5-3-7-4 USB Configuration 100

5-3-8 Miscellaneous Configuration 101

5-3-9 Server ME Configuration 102

5-3-10 Runtime Error Logging 103

5-3-10-1Whea Setting 104

5-3-10-2Memory Error Enabling 105

5-3-10-3PCI/PCI Error Enabling 106

5-4 Server Management Menu 107

- 5 -

5-2-1 Serial Port Console Redirection 46

5-2-2 PCI Subsystem Settings 50

5-2-2-1 PCI Express Settings 52

5-2-3

5-2-4

5-2-5

5-2-6

5-2-7

5-2-8

5-9

Network Stack 54

CSM Configuration 55

Post Report Configuration 57

Trusted Computing 58

USB Configuration 59

Chipset Configuration 60

SIO Configuration 61

5-2-10 iSCSI Configuration 65

5-3 Intel RC Setup Menu 66

5-3-1 Processor Configuration 67

5-3-1-1 Pre-Socket Configuration 70

5-3-2 Advanced Power Management Configuration 72

5-3-2-1 CPU P State Control 73

5-3-2-2 CPU C State Control 74

5-3-2-3 CPU T State Control 75

5-3-3

5-3-4

5-3-5

Common RefCode Configuration 76

QPI Configuration 77

Memory Configuration 79

- 6 -

5-4-1

5-4-2

5-4-3

System Event Log 109

View FRU Information 110

BMC network configuration 111

5Security Menu 112

5-5-1 Secure Boot menu 113

5-5-1-1 Key Management 114

6 Boot Menu 116

7Save & Exit Menu 118

5-8 BIOS POST Codes 120

9 BIOS POST Beep code 124

5-9-1 PEI Beep Codes 124

5-9-2 DEX Beep Codes 124

10 BIOS Recovery Instruction 125

- 7 -

Box Contents

R270-B2O/R270-C3C System

Driver CD

•The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

•The motherboard image is for reference only.

- 8 -

Safety, Care and Regulatory Information

Important safety information

Read and follow all instructions marked on the product and in the documentation before you operateyour sys-

tem. Retain all safety and operating instructions for future use.

•The product should be operated only from the type of power source indicated on the rating label.* If your

computer has a voltage selector switch, make sure that the switch is in the proper position foryour area.

The voltage selector switch is set at the factory to the correct voltage.

•The plug-socket combination must be accessible at all times because it serves as the main

disconnect- ing device.

•All product shipped with a three-wire electrical grounding-type plug only fits into a grounding-type

poweroutlet. This is a safety feature. The equipment grounding should be in accordance with local and

nationalelectrical codes. The equipment operates safely when it is used in accordance with its marked

electricalratings and product usage instructions

•Do not use this product near water or a heat source.* Set up the product on a stable work surface or so

as to ensure stability of the system.

•Openings in the case are provided for ventilation. Do not block or cover these openings. Make sure

youprovide adequate space around the system for ventilation when you set up your work area. Never

insertobjects of any kind into the ventilation openings.

•To avoid electrical shock, always unplug all power cables and modem cables from the wall outletsbefore

removing covers.

•Allow the product to cool before removing covers or touching internal components.

Precaution for Product with Laser Devices

Observe the following precautions for laser devices:

•Do not open the CD-ROM drive, make adjustments, or perform procedures on a laser device other than

those specified in the product's documentation.

•Only authorized service technicians should repair laser devices.

Precaution for Product with Modems, Telecommunications, ot Local AreaNetwork Options

Observe the following precautions for laser devices:

•Do not connect or use a modem or telephone during a lightning storm. There may be a risk of

electri- calshock from lightning.

•To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord.

•Do not plug a modem or telephone cable into the network interface controller (NIC) receptacle.

•Disconnect the modem cable before opening a product enclosure, touching or installing internalcompo-

nents, or touching an uninsulated modem cable or jack.

•Do not use a telephone line to report a gas leak while you are in the vicinity of the leak.

Federal Communications Commission (FCC) Statement

Warning

This is a class A product. In a domestic environment this product may cause radiointerfer-

enceIn which case the user may be required to take adequate measures.

This equipment has been tested and found to comply with the limits for a Class A digital device,pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interfer-

ence when the equipment is operated in a commercial environment. This equipmentgenerates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance withthe instruction manual, may

cause harmful interference to radio communications. Operation of thisequipment in a residential area is likely

to cause harmful interference in which case the user will berequired to correct the interference at his own ex-

pense.Properly shielded and grounded cables and connectors must be used in order to meet FCC emission-

limits. Neither the provider nor the manufacturer are responsible for any radio or television interferencecaused

by using other than recommended cables and connectors or by unauthorized changes ormodifications to this

equipment. Unauthorized changes or modifications could void the user's authority tooperate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired opera-

tion.

Canadian Department of Communications Compliance Statement

This digital apparatus does not exceed the Class A limits for radio noise emissions from digitalapparatus as

set out in the radio interference regulations of Industry Canada.Le present appareil numerique n'emet pas

de bruits radioelectriques depassant les limites applicables auxappareils numeriques de Classe A prescrites

dans le reglement sur le brouillage radioelectrique edicte parIndustrie Canada.

Class A equipment

This device has been tested and found to comply with the limits for a class A digital device pursuantPart 15 of

the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference when

the equipment is operated in a commercial environment. This equipmentgenerate, uses, and can radiate

radio frequency energy, and if not installed and used in accordancewith the instructions, may cause harmful

interference to radio communication. Operation of thisequipment in a residential area is likely to cause harm-

ful interference, in which case the user will berequired to correct the interference at personal expence.

However, there is no guarantee that interference will not occur in a particular installation. If thisdevice does

cause harmful interference to radio or television reception, which can be determined bytuning the device off

and on, the user is encouraged to try to correct the interference by on or more ofthe following measures:

•Reorient or relocate the receiving antenna

•Increase the separation between the device and receiver

•Connect the device into an outlet on a circuit different from that to which the receiver isconnected'Consult

the dealer or an experienced radio/television technician for help.

- 9 -

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Penguin Computing

Penguin Computing

Penguin Computing MLB 2203 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario