PEERLESS Jumbo 2000 JM 2630 Guía

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

1 of 9ISSUED: 06-02-98 SHEET #: 128-9100-10 06-21-05

Installation and Assembly

- Jumbo 2000®

Models: JM 2630, JM 2640,

JM 2640D, JM 2650,

JM 2650D, JM 2655,

JM 2660, JM 2665,

JM 2670, JM 2675

Please read this information first

Read entire instruction sheet before beginning assembly

andinstallation.

Check parts on parts listing before beginning assembly.

Many accessories are available for this product. Please

contact customer service or visit website for more

information.

The retainer bar (D) in step 4 must be placed with ex-

truded side towards the anti rollout hook (C).

Pay close attention to the assembly of the threaded flush

mount tube (N) in step 6. The retaining collar (K) threads

up into the horizontal support (G). The set screw (W) is

then installed from the inside of that collar into the notch

in the tube. Refer to drawings for correct placement.

The placement of set screw (W) in detail 3 of step 6 is

essential to the safety of the installation.

This product is intended for use with UL

Listed products and must be installed by a

qualified professional installer.

Model #

JM 2630

JM 2640,

JM 2640D

JM 2650,

JM 2650D,

JM 2655

JM 2660,

JM 2665

JM 2670,

JM 2675

27"

35"

40"

Product is UL rated up to ___ TV

sizes, per attached chart

TV size

17"

21"

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

2 of 9ISSUED: 06-02-98 SHEET #: 128-9100-10 06-21-05

JM 2630

128-1023

128-1024

128-1128

128-1107

128-1116

128-1117

128-1105

570-0024

128-1016

128-1340

128-1339

540-9432

1800-375

540-9431

128-0067

1446-014

520-9207

530-1016

520-9261

520-1166

520-1041

520-1105

520-9250

2245-081

590-1055

500-9006

540-9400

JM 2650

128-1023

128-1024

128-1130

128-1111

128-1116

128-1117

128-1105

570-0024

128-1018

128-1335

128-1334

540-9432

1800-375

540-9431

1446-014

520-9207

530-1016

520-9261

520-1166

520-1041

520-1105

520-9250

2245-081

590-1055

500-9006

540-9400

JM 2650D

128-1026

128-1027

128-1135

128-1111

128-1116

128-1117

128-1105

570-0024

128-1018

128-1335

128-1334

540-9432

1800-375

540-9431

1446-014

520-9207

530-1016

520-9261

520-1166

520-1041

520-1105

520-9250

2245-081

590-1055

500-9006

540-9400

JM 2655

128-1026

128-1027

128-1135

128-1109

128-1116

128-1117

128-1105

570-0024

128-1018

128-1335

128-1334

540-9432

1800-375

540-9431

1446-014

520-9207

530-1016

520-9261

520-1166

520-1041

520-1105

520-9250

2245-081

590-1055

500-9006

540-9400

JM 2660

128-1026

128-1027

128-1136

128-1113

128-1116

128-1117

128-1105

570-0024

128-1019

128-1335

128-1334

540-9432

1800-375

540-9431

1446-014

520-9207

530-1016

520-9261

520-1166

520-1041

520-1105

520-9250

2245-081

590-1055

500-9006

540-9400

JM 2665

128-1026

128-1027

128-1136

128-1111

128-1116

128-1117

128-1105

570-0024

128-1019

128-1335

128-1334

540-9432

1800-375

540-9431

1446-014

520-9207

530-1016

520-9261

520-1166

520-1041

520-1105

520-9250

2245-081

590-1055

500-9006

540-9400

JM 2670

128-1026

128-1027

128-1137

128-1115

128-1116

128-1117

128-1105

570-0024

128-1020

128-1335

128-1334

540-9432

1800-375

540-9431

1446-014

520-9207

530-1016

520-9261

520-1166

520-1041

520-1105

520-9250

2245-081

590-1055

500-9006

540-9400

JM 2675

128-1026

128-1027

128-1137

128-1113

128-1116

128-1117

128-1105

570-0024

128-1020

128-1335

128-1334

540-9432

1800-375

540-9431

1446-014

520-9207

530-1016

520-9261

520-1166

520-1041

520-1105

520-9250

2245-081

590-1055

500-9006

540-9400

support tray left

support tray right

support tray center

vertical support arm

anti-rollout hook

retainer bar

top clamp

adhesive pad

horizontal support

tilt bracket right

tilt bracket left

fiber washer - large inside dia.

retaining collar

fiber washer - small inside dia.

spacer (only 2630-2640D models)

flush mount tube

5/16 - 18 x 1/2" carriage bolt

5/16 washer/nut combo

M10-1.5 x .7 flange nut

M6 x 18 mm flat phillips screw

M10-1.5 x 16 mm socket screw/washer combo

M10 serrated flange head screw

M5 x .8 x 10 mm screw

uni-clip

plastic cover for anti-rollout hook

#10 x 3/4 particle board screw

#10 flat washer

M O D E L N U M B E R

DESCRIPTION

JM 2640

128-1023

128-1024

128-1129

128-1109

128-1116

128-1117

128-1105

570-0024

128-1017

128-1335

128-1334

540-9432

1800-375

540-9431

128-0067

1446-014

520-9207

530-1016

520-9261

520-1166

520-1041

520-1105

520-9250

2245-081

590-1055

500-9006

540-9400

JM 2640D

128-1026

128-1027

128-1134

128-1109

128-1116

128-1117

128-1105

570-0024

128-1017

128-1335

128-1334

540-9432

1800-375

540-9431

128-0067

1446-014

520-9207

530-1016

520-9261

520-1166

520-1041

520-1105

520-9250

2245-081

590-1055

500-9006

540-9400

QTY.

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

3 of 9ISSUED: 06-02-98 SHEET #: 128-9100-10 06-21-05

SIDE VIEW

FLOOR

Place TV onto a piece of pipe as

shown.(Pipeshouldbeafewinches

wider than the TV.) Roll TV back and

forth to find the balance point. This is

the center of gravity. Mark the center

of gravity on the side of the TV.

CENTER

GRAVITY

Adjust support tray (A1,A2,& A3, three pieces)

to match width of TV.

Lock support tray using four carriage bolts (O),

andwasher/nutcombos(P).Tightensecurely.

Attachadhesivepads(F)to

top clamps (E).

Insertplasticcovers(Y)onto

endsofanti-rollouthooks(C). E

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

4 of 9ISSUED: 06-02-98 SHEET #: 128-9100-10 06-21-05

Attach support tray (A) to vertical support arms (B) as shown. Choose the square hole which aligns closest

with the center of gravity mark on the TV (as determined in step 1). Attach anti-rollout hooks (C) as shown

usingM6screws(S)andretainerbars(D).

Althoughtopclamps(E)and anti-rollout

hooks (C) [see step 5] will provide more than

adequate support for the TV, some installers

may wish to also attach the support tray to

the TV bottom.

Using uni-clips (X) and M5 screws (W) (see

instruction card in fastener pack), or #10 x

3/4"particleboardscrews(Z)andwashers

(AA)(forattachmenttomountingbossesif

present), or a combination of both, attach

support tray (A) to TV bottom. [To do this

place TV upside down on a flat stable

surfaceandposition supporttrayupside

down on TV bottom.] Attach at four places

as close to the four corners of the TV bottom

as possible.

Required for OSHPD approved installation - optional otherwise

TV BOTTOM

TV(UPSIDEDOWN)

Note:Extrudedsideofretainerbar(D)goestowards

anti-rollouthook(C).Handtightenonly.

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

5 of 9ISSUED: 06-02-98 SHEET #: 128-9100-10 06-21-05

Pump ratchet handle to tighten belt. For secure

hold, ratchet reel must have at least two layers of

belt around it.

Note: Too many layers of belt around ratchet reel

will cause it to jam. To avoid this problem be sure to

remove ALL slack from belt before pumping ratchet

handle.

After belt is tight, close ratchet handle.

To release, compress release bar and open ratchet

handle 180°.

Wrap belt around TV or monitor and mounting

surface. Insert end of belt through ratchet reel

and pull until ALL slack is out of belt.

release bar

ratchet

handle

belt

Insert belt under,

behind, then through

ratchet reel.

ratchet reel

Position TV on support tray (A), thread belt through slots in top

clamps (E). Secure TV with belt as directed in detail 1, 2 & 3.

Safety belt, ACC 666 (Sold Separately), required for OSHPD approved installation.

Use of this belt is optional for all other installations.

Optional safety belt ACC 666 (required for OSHPD approved

installation) sold separately.

Threadbeltbetweensupportarms(B)andanti-rollouthooks(C),

andbetweensupportarms(B)andsupporttray(A).

belt

detail 1

detail 2

detail 3

belt

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

6 of 9ISSUED: 06-02-98 SHEET #: 128-9100-10 06-21-05

Note: Slots in corners of top clamps (E) and corners of vertical support arms (B) allow for the installation of

safety belt (model ACC 666, sold separately). If using this belt, install it now as shown on page five.

Position TV onto support tray (A).Positionanti-rollouthooks(C) against front edge of TV.

DETAIL1

DETAIL 2

• Each anti-rollout hook (C) should have at least 1/4" of surface contact and fit snugly against the front edge of the

TV cabinet. If this is not the case, the support tray (A) must be adjusted smaller [see step 2], or the vertical

support arms (B) adjusted inward [see step 4].

WARNING

Insert and press down on top clamps (E) with sufficient force to assure that the top clamps are fitted snugly to

theTVcabinet.Note: Topclamps(E)fit betweenrolloutprotectors(C)and verticalsupportarms(B) [DETAIL1].

Press down on each top clamp (E) while securely tightening each M6 screw (S).

Press inwards on the left and right vertical support arms (B) with sufficient force to assure that the arms are fitted

snugly to the TV cabinet. By hand, thread one M10 serrated flange head screw (U) into each vertical support arm

(B) through one of three threaded holes [1, 2, or 3; DETAIL 2]. Choose the threaded holes that will allow just

enoughclearance(approximately1 1/2") betweenthehorizontalsupportarm and topclamps[seestep7]. Leave

about1/4"ofexposedthread.

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

7 of 9ISSUED: 06-02-98 SHEET #: 128-9100-10 06-21-05

Jumbo mount shown with optional ceiling plate/wall arm accessories.

FIRST: From the top fully thread flush mount tube (N) into threaded fitting in wall arm or ceiling plate. Install the

wall arm or ceiling plate according to instructions included with it.

NEXT: Attach right and left tilt brackets (H &I) to horizontal support (G) using four screw/washer combos (T).

Before tightening screws make sure tilt brackets are adjusted horizontally to align precisely with screws in the

side of vertical support arms (B). Attach horizontal support (G) to wall arm or ceiling plate using fiber washers (J

&L), spacer (M, onlyincludedwithsmallermodels)andretainingcollar(K). IMPORTANT: Retaining collar (K)

requires a safety screw (W) [refer to DETAIL 3, page 8].

FINALLY: Be sure that hooks in right and left tilt brackets (H & I) are open end forward. Hang the TV / bracket

assembly.

Insert one screw/washer combo (T) through slot in each tilt bracket (H & I). Hand tighten.

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

8 of 9ISSUED: 06-02-98 SHEET #: 128-9100-10 06-21-05

When attaching the horizontal support (G) to wall arm or

ceilingplate,carefullythreadretaining collar(K)ontoend

offlushmount(N) tube(orextensioncolumn). Tightenat

least four complete turns ending with one of the small

threaded holes aligned with slot in the end of flush mount

tube(N)(orextensioncolumn).Insert and tighten oneM5

screw (W).

DETAIL3

(BOTTOMVIEW)

TILTCLEARANCE

Adjust TV to desired tilt, then TIGHTEN ALL SCREWS SECURELY. Maximum tilt is 30°. If tilt clearance is a

problemrevisitstep5,DETAIL 2.

• Screw (W) is self tapping and may be hard to get

started but is essential to this installation. Failure to

install this screw can cause the mount to fall.

WARNING

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

9 of 9ISSUED: 06-02-98 SHEET #: 128-9100-10 06-21-05

APPLICATION: ATTACHMENT TO WOOD / CONCRETE MOUNTING SURFACE

Support

Tray

Depth

10"

14"

10"

14"

TV/Monitor Product Peerless rated when attached to...

Screen

Aspect

Ratio

standard

wide

standard

wide

standard

wide

Model

Number

JM 2630

JM 2640

JM 2640D

JM 2650

JM 2650D

JM 2655

JM 2660

JM 2665

JM 2670

JM 2675

(330 mm) (432 mm)

(482 mm) (533 mm)

(635 mm) (711 mm)

(762 mm) (889 mm)

(686 mm) (889 mm)

(940 mm) (1067 mm)

(889 mm) (1067 mm)

(254 mm)

(356 mm)

(254 mm)

(356 mm)

Screen Size

13" - 17"

19" - 21"

25" - 27"

30" - 35"

27" - 35"

37" - 42"

35" - 42"

*not compatible

Wall Arm

WMJ018

150 lb

(65 kg)

Wall Arm

WMJ022

150 lb

Suspended

Ceiling Plate

CMJ450

150 lb

250 lb

(65 kg)

(113 kg)

Double

Wall Arm

WMJ 025H

150 lb

300 lb

(65 kg)

(137 kg)

(65 kg)

(137 kg)

Ceiling Plate

CMJ 470,

CMJ 480,

CMJ490

150 lb

300 lb

Jumbo 2000 mount

JUMBO2000®SPECIFICATIONS

(65 kg)

• Weight of TV or monitor not to exceed maximum load capacity (Peerless rated)!

WARNING

PeerlessandJumbo2000areregisteredtrademarksofPeerlessIndustries,Inc.

Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Soporte de TV de PEERLESS

PEERLESS

PEERLESS Smartmount ST650 and assembly Guía

PEERLESS

PEERLESS EWMU Guía

PEERLESS

PEERLESS PARAMOUNT PA730 Guía

PEERLESS

PEERLESS ACC 908 Guía

PEERLESS

PEERLESS SLWS410/BK Guía

PEERLESS

PEERLESS PARAMOUNT PT650 and assembly Guía

PEERLESS

PEERLESS DSX200 Guía

PEERLESS

PEERLESS PARAMOUNT PP740 Guía

PEERLESS

PEERLESS D-FPT2-320 Guía

PEERLESS

PEERLESS DS416 Guía

PEERLESS

PEERLESS SUA746PU Guía

PEERLESS

PEERLESS WSP 320 Manual de usuario

PEERLESS

PEERLESS Designer Series Guía

PEERLESS

PEERLESS SUF640P and assembly Guía

PEERLESS

PEERLESS PARAMOUNT PT660 Guía

PEERLESS

PEERLESS SmartMount SA740P Guía

PEERLESS

PEERLESS PARAMOUNT PF632 and assembly Guía

PEERLESS

PEERLESS Peerless OneMount Flat Panel Modular Wall Mount... Guía

PEERLESS

PEERLESS Smartmount SA752PU Manual de usuario

PEERLESS

PEERLESS Smartmount ST670 Manual de usuario

PEERLESS

PEERLESS SF630P and assembly Guía

PEERLESS

PEERLESS PLA-1 Manual de usuario

PEERLESS

PEERLESS WSP816 Guía

PEERLESS

PEERLESS PARAMOUNT PT632 and assembly Guía

Manuales populares de Soporte de TV de otras marcas

Ergotron

Ergotron Neo Flex Cantilever UHD Manual de usuario

StarTech.com

StarTech.com FPCEILBTB Manual de usuario

VonHaus

VonHaus 05/038 Manual de usuario

Techlink

Techlink ECHO TV Manual de usuario

Sandstrom

Sandstrom SSTVMC12X Manual de usuario

Sony

Sony SU-WL700 Guía

ICW

ICW SCACC18 Manual de usuario

LG WM-L640V Manual de usuario

Gembird

Gembird WM-65ST-01 Manual de usuario

ERARD

ERARD FiTUP XXL 035320 Manual de usuario

Kanto

Kanto RCF180 Manual de usuario

GEM

GEM GEM GP001 Manual de usuario

Gladiator Joe

Gladiator Joe GJ0A0053 Manual de usuario

Vivotek

Vivotek AM-105 Manual de usuario

Vivo

Vivo VESA STAND-VAD1B Manual de usuario

AmazonBasics

AmazonBasics B07QG3LMG4 Manual de usuario

Secura

Secura QLF210 Manual de usuario

Marquant

Marquant 929-083 Instrucciones de funcionamiento