PEERLESS ACC 908 Guía
1 of 5 ISSUED: 04-28-03 SHEET #: 095-9161-3 08-16-04
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
Model: ACC 908
Installation and Assembly - Metal Stud Accessory Kit for
LCL, LCS, and LCA Models
Maximum Load Capacity:
25 lb (11.4 kg)
Read instruction sheet before you start installation and assembly.
Before you start check the parts list to insure all of the parts shown are included.
Parts List
Description Qty. Part Number
Ametal stud wall plate 1 095-4173
Bzip-it drywall anchor 4 590-2107
C1/4-20 x 2.5" round head phillips screw 2 520-9522
D1/4-20 toggler 2 590-1093
E1/4-20 x 1/2" flat head phillips screw 2 520-2178
F1/4-20 x 1/2" pan head phillips screw 2 520-9511
G#8 x 1" pan head phillips sheet metal screw 4 520-2179
Note: Some parts may appear slightly different than illustrated.
D
C
B
G
F
E
A
2 of 5 ISSUED: 04-28-03 SHEET #: 095-9161-3 08-16-04
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
Use stud finder to locate center of metal stud. Place and level
metal stud wall plate (A) on wall and mark the centers of the
six circled holes on the wall as shown right.
Drill two 11/16" (17 mm) dia. holes through center of metal
stud. Screw four zip-it drywall anchors (B) in the four marked
corner holes as shown below.
A
METAL
STUD
DRYWALL
11/16" dia. hole
(2 plcs.)
B
3 of 5 ISSUED: 04-28-03 SHEET #: 095-9161-3 08-16-04
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
C
A
Attach metal stud wall plate (A) to center of metal
stud using two 1/4-20 x 2.5" phillips screws (C) and
two 1/4-20 togglers (D) as shown below and in
Illustration A,but do not tighten until after the metal
stud wall plate (A) is securely fastened in step 3.
Pull screw (C) back until toggler (D) is flush with
metal stud and hold. Thread screw through with
fingers and loosely tighten.
Place screw (C) through metal stud wall plate (A).
Partially fasten toggler (D) to back of screw. Pivot
toggler ends 90° and push through hole in drywall.
D
C
C
D
DRYWALL
DRYWALL METALSTUD
ILLUSTRATION A
A
A
Fasten metal stud wall plate (A) using four #8 x 1"
phillips sheet metal screws (G) as shown. Securely
tighten two 1/4-20 x 2.5" phillips screws (C).
G
D
C
• Product must be mounted through drywall that has a
minimum thickness of 1/2" and into metal studs, 26
gauge or heavier.
WARNING
4 of 5 ISSUED: 04-28-03 SHEET #: 095-9161-3 08-16-04
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
Attach wall plate to metal stud wall plate (A) using two 1/4-20 x 1/2” flat
head phillips screws (E) where indicated right and marked in detail 2.
Instructions for mounting a Peerless®LCD screen mount model
LCS or LCL (articulating wall arm) with a 4 1/4" wall plate
TOP OF WALL PLATE
DETAIL 2
(FRONT VIEW)
ACUTAWAY
OF LCL/LCS
MODEL
WALL
PLATE
A
E
Attach wall plate to metal stud wall plate (A) using two 1/4-20 x 1/2" flat
head phillips screws (E) where indicated right and marked in detail 1.
Instructions for mounting a Peerless®LCD screen mount model
LCS or LCL (articulating wall arm) with a 5 1/2" wall plate
CUTAWAY
OF LCL/LCS
MODEL
WALL
PLATE
A
E
DETAIL 1
(FRONT VIEW)
TOP OF WALL PLATE
A
5 of 5 ISSUED: 04-28-03 SHEET #: 095-9161-3 08-16-04
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
TOP OF WALL PLATE
DETAIL 4
(FRONT VIEW)
A
DETAIL 3
(FRONT VIEW)
TOP OF WALL PLATE
A
CUTAWAY OF LCA
LARGE MODEL
WALL
PLATE
A
Instructions for mounting a Peerless LCD
screen mount model LCA Large (swing arm)
Attach wall plate to metal stud wall plate (A) using two 1/4-20 x 1/2" pan head
phillips screws (F) where indicated right and marked in detail 3.
A
CUTAWAY OF LCA
SMALL MODEL
Instructions for mounting a Peerless LCD screen
mount model LCA Small or Medium (swing arm)
Attach wall plate to metal stud wall plate (A) using two 1/4-20 x 1/2" pan head
phillips screws (F) where indicated right and marked in detail 4.
F
WALL
PLATE
© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademarks of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
F
Otros manuales de Soporte de TV de PEERLESS
PEERLESS
PEERLESS ACC324 Guía
PEERLESS
PEERLESS SMARTMOUNT SA763PU Manual de usuario
PEERLESS
PEERLESS SUF660P and assembly Guía
PEERLESS
PEERLESS SmartMount SF670 and assembly Guía
PEERLESS
PEERLESS SmartMount SA740P Guía
PEERLESS
PEERLESS WSP816 Guía
PEERLESS
PEERLESS SMARTMOUNT SF 635P Guía
PEERLESS
PEERLESS IM740P Guía
PEERLESS
PEERLESS HAVE1 FPZ-655 Manual de usuario
PEERLESS
PEERLESS Smartmount ST640 Manual de usuario
PEERLESS
PEERLESS PARAMOUNT PFT640 and assembly Guía
PEERLESS
PEERLESS Jumbo 2000 JM 2630 Guía
PEERLESS
PEERLESS PARAMOUNT PA730 Guía
PEERLESS
PEERLESS PARAMOUNT PT660 Guía
PEERLESS
PEERLESS Smartmount ST650 Guía
PEERLESS
PEERLESS SUT645P Guía
PEERLESS
PEERLESS MIS374A Guía
PEERLESS
PEERLESS DSX200 Guía
PEERLESS
PEERLESS SR1G Manual de instrucciones
PEERLESS
PEERLESS SR1M Guía
