PDi PDI-P23LCDC Manual de usuario

Communication

Systems Inc. PDI-P23LCDC Quick Programming

Instructions Page 1 of 3

Better Solutions Are Within Reach™ Document Number PD196-121 Rev 1

These instructions are provided as a quick start for programming the PDI-P23LCDC television.

The instructions assume you have installed the TV on the wall, correctly wired and connected a

compatible pillow speaker, and have the programming remote control in hand. See the User’s

Manual for details.

Channel Setup

The TV offers three different programmable channel banks or Service Levels. Programming is

only accomplished using the handheld remote control.

Signal

Four different tuning types are available depending upon the healthcare facilities signal style.

Selection of the correct signal type is required for the TV to recognize all possible channels and

before any channel programming can begin.

1. Press the SETUP button to display the SETUP MODE menu.

2. Press the CH▲/ CH▼

button to select Signal.

3. Press VOL◄/ VOL►

to select Air, Cable STD, Cable IRC or Cable HRC. NOTE: Most

hospitals use the Cable STD signal style.

4. Press the CH▲/ CH▼

button to select Mode.

5. Press VOL◄/ VOL►to set the scope of channel scanning.

Analog Only: TV searches for analog channels only.

Digital Only: TV searched for digital channels only.

Analog and Digital: TV searches for both analog and digital channels.

Communication

Systems Inc. PDI-P23LCDC Quick Programming

Instructions Page 2 of 3

Better Solutions Are Within Reach™ Document Number PD196-121 Rev 1

6. Press the CH▲/ CH▼

button to select the Channel Sequence menu item.

Press

VOL◄/ VOL►

to set the Channel Sequence in which the channels are displayed after

searching.

Interleave A+D: In the order of channel number regardless of the system.

All A then D: Digital channels are displayed after all analog channels.

Press the

CH▲/ CH▼

button to select the Service Level you wish to program. The menu

displays the current programming status of each level as either Programmed or Blank. NOTE:

A Programmed service level can also be re-programmed if desired.

Press the

VOL►

button

to start auto programming.

10. A confirmation menu will appear before proceeding. Press either the CH▲to start auto

programming. Press CH▼

button to cancel the operation.

The TV will now search all

available channels. Auto programming may require several minutes to complete.

11. Press the SETUP button to return to normal TV viewing.

SOUND SETUP FOR PILLOW SPEAKER OPERATION

Internal Speaker Enable

The speaker’s inside the TV’s cabinet can be turned on or off for either different TV Service Level

or Source modes. Note: Turn Off the TV’s internal speaker to guarantee sound to an attached

pillow speaker.

1. In the Sound menu, press CH▲/ CH▼

button to select the Internal Speaker Enable menu

item.

Press the

CH▲/ CH▼

button to select the desired Service Level(s) or Sources.

Press

VOL◄/ VOL►to Disable.

4. Press the SETUP button to return to the preceding menu.

Communication

Systems Inc. PDI-P23LCDC Quick Programming

Instructions Page 3 of 3

Better Solutions Are Within Reach™ Document Number PD196-121 Rev 1

Minimum Volume

Sets the minimum volume level the

TV can reach. Setting this to any value other than

guarantees that some level of sound will always be heard in the pillow speaker when the

TV is

operating.

the

Sound

menu, press the

CH▲/ CH▼

button to select

Minimum

Volume

Press the

VOL◄/ VOL►

button to select your preferred minimum volume. A setting of 30%

to 40% works well with most brands of pillow speakers.

Press the

SETUP

button to return to the preceding menu.

Power On Volume

Sets the initial volume the

TV starts with upon

powering on. Once the

TV is on, the volume

can be set to any allowable level.

1. In

Sound

menu, press the

CH▲/ CH▼

button to select

Power on Volume.

Press the

VOL◄/ VOL►

button to

determine your preferred volume when the

TV turns on. Setting the level to LAST

causes the

TV to remember the last volume

level used by the

TV prior to turning off.

Press the

SETUP

button to return to the

preceding menu.

ADDITIONAL INSTRUCTIONS

Additional programming instructions can be found in the television’s user manual. Please refer to

document number PD196-099 for further details.

Tabla de contenidos

Otros manuales de TELEVISOR de PDi

Manuales populares de TELEVISOR de otras marcas

Philips

Philips Colour Television Manual de usuario

Toshiba

Toshiba 27A10 Manual de usuario

Philips

Philips 42PF9630A/37 Manual de usuario

Hitachi

Hitachi 32FX48B Manual de usuario

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario

Changhong Electric

Changhong Electric uhd55b6000is Manual de usuario

Philips

Philips Matchline 21CE7551 Manual de usuario

Panasonic

Panasonic Genus TX-G10 Manual de usuario

Toshiba

Toshiba 19A20 Manual de usuario

Philips

Philips 25PT4523-16 Manual de usuario

Sony

Sony XBR-100Z9D Manual de usuario

Philips

Philips PR0930X3 Manual de usuario

Philips

Philips Brilliance 231P4QPY Manual de usuario

Samsung

Samsung 55S9 B Series Manual de usuario

Philips

Philips 32HF9385D Guía de solución de problemas

Sharp

Sharp LC-40FI5012E Manual de usuario

Loewe

Loewe Table Stand Reference 55 Manual de usuario

Philips

Philips 32PFH5300 Manual de usuario