Use Manual Print: 18.12.2022 18:27
DMX Generator V3
File: pde 102030 DMX Generator V3, User Manual rev 00.18 Seite 3 von 18
www.pde-medientechnik.de
Item Description & Possible Uses
DMX Generator, Revision 3, is a intelligent and comfortable converter from any IP based
control system via LAN to DMX512. All commands are ASCII based or doable by HTTP://
requests and orientated to control light/channels in a easy way including fade times, presets
and fades over all. All in All are the auto fade commands and group fades for reducing the lan
traffic enormously and all will be internally calculated in DMX native resolution of 40 Hz.
Typical uses are controllers from KNX Home Server, Crestron, AMX, RTI, Control4, Shelly, Flic
and many more
Tender text:
pde DMX Generator V3, Product#: 102030
Ethernet to DMX converter with independent fade automations and two independently
amplified DMX outputs in a common DMX universe. In DIN rail housing, 4TE, with POE
supply, bidirectional control via HTTP requests, TCP/IP clients or unidirectional via UDP using
the transparent pde ASCII protocol. Fade commands integrated in the protocol cause a
unique reduction in data traffic in the network and make control much easier. For fade
processes, the dimming values are automatically calculated in the native resolution of the
DMX signal 40x per second for all 512 DMX channels in real time. This results in a unique
reduction of the "stair step effects" in fade processes. Different channels can be controlled
simultaneously with individual fade times. "Sum commands" enable complete "black-outs"
and "black-ins". Optimized management of presets for individual channels or related areas
optimizes the saving and retrieval of presets.
The pde DMX generator is an ideal control of DMX lighting by control systems such as
Crestron, KNX, Control4 and many more. in which the best possible and most comfortable
dimming processes are to be implemented with little effort.
Technical Specification:
Source: POE, Power Over Ethernet,
Power : typical 1,5 - 2,0 Watt
Connector: LAN 100MBit, incl. POE on RJ45 female connector
2 x DMX out on 3 pin. Phoenix Contact® connector
2 x Ground/Earth
Size: 69 mm x 68 mm x 90 mm, (W x H x D)
DIN Rail Mount: 4 Register
Weight: 150 g
