PCS CS-7830 Manual de usuario
Model No. CS-7830
* Please read the instructions described in the user manual carefully
before use, and keep it for future reference.
Contents
Safety Precautions
Product Overview
Package List
Use Instructions
About Recharging
1. How to Recharge the Hair Clipper
2. Important Recharging Safety Instructions
Cutting-length Setting
1. Preparations Before Use
2. Mount the Guide Comb
3. Disassemble the Guide Comb
Assembly of the Blades
Blades Alignment
Cleaning and Maintenance
Troubleshooting
Parameters
Product Disposal
Warranty Information
Disclaimer
Contact Us
----------------------------------------------------------------------
------------------------------------------------------------------------
---------------------------------------------------------------------------------
--------------------------------------------------------------------------
------------------------------------------------------------------------
-------------------------------------------------------
---------------------------------------------
---------------------------------------------------------------
-------------------------------------------------------------------
--------------------------------------------------------------------
------------------------------------------------------------
--------------------------------------------------------------
------------------------------------------------------------------------
--------------------------------------------------------
-------------------------------------------------------------------------
----------------------------------------------------------------------------------
-------------------------------------------------------------------------
-----------------------------------------------------------------
------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
1
2
3
3
4
4
5
6
6
7
7
7
8
9
10
11
12
13
14
15
Safety Precautions
Please do not disassemble the clipper without authority.1.
The clipper can not be washed. Please keep it away from any liquid.2.
The clipper can ONLY be cleaned with a slightly moist cloth or with a mild
soap solution.
3.
Do not charge the clipper with a temperature above 104℉ or below 32℉.4.
0°
40°
Notes:
It is normal that the clipper generates a small amount of heat during use or
charging.
Please remove the battery safely and return it to the specified places when
the battery runs out. NEVER discard it casually or with the household waste.
- 1 -
Product Overview
Bottom Blade
Top Blade
Taper Lever
LED Display Screen
ON/OFF Switch
Hair Cutting Cape
Hair Clip
Blade Oil Cleaning
Brush USB Cable Long Comb
Guide Combs
3 mm 6 mm 25 mm22 mm19 mm16 mm13 mm10 mm
- 2 -
Package List
Use Instructions
Note:
When unpacking the product, please check if the product and accessories are
intact carefully. If there is anything damaged or missing, please don�t hesitate
to contact us.
1* Hair Clipper
8* Guide Combs
1* Blade Oil
1* Cleaning Brush
1* Hair Clip
1* USB Cable
1* Long Comb
1* Hair Cutting Cape
1* User Manual
Adjust the taper lever on the hair clipper to control the hair cutting length
within the range of 0.3-2mm. It can help to crop the hair as short as needed.
The top blade can be adjusted to 0.3mm. This product can be used for profes-
sional barbering, which allows the user to cut hair with personal designs.
Equipped with guide combs of various sizes, this product can be used to freely
change the hair cutting length. By using the 3mm/6mm/10mm guide combs,
cut the hair near ears and on the back of the head to achieve an effect of
gradual cutting, making a layered shape.
- 3 -
About Recharging
- 4 -
Notes:
Insert the charger into the bottom of the hair clipper, and plug it into the
power outlet for charging.
The charging indicator on the clipper will light up, which means the clipper is
charging normally.
If the indicator doesn’t light up after it is plugged into the power outlet, it
indicates that the power cable is not plugged well or its direction is reversed.
Please unplug the power cable and adjust it immediately, otherwise, the
battery will be damaged.
The battery damage caused by using a non-original USB cable or an adapter
with inconsistent voltage is not covered by the warranty.
1. How to Recharge the Hair Clipper
About Recharging
The product must be recharged at the right voltage, and must not be charged
with a charger exceeding the indicated voltage. Otherwise, it may damage the
product or burn the internal PCB out, resulting in personal injury or fire.
This product is equipped with a USB cable, which needs a specific adapter.
When charging, please use it with a 5V charger.
This product only supports DC power input. Do not plug it into the AC mains.
When the product is connected with an adapter for charging, the charging
indicator on the LED display screen will light up. When it displays 100%, the
charging indicator will go out, indicating that the product has been fully
charged.
When the product is in use, the indicator for adding oil on the LED display
screen will light up to remind the user to add oil to the blades every 2 hours.
Please charge the product for more than 3 hours for the first use to make it
display 100% on the LED display screen.
It is recommended to charge the product at the ambient temperature
between 32℉ and 104℉. If the temperature exceeds this range, the battery
performance may be reduced.
The full charging time is about 5 hours. Depending on the frequency of use,
method of use and ambient temperature, the running time may vary.
It is recommended to recharge the product after it is fully discharged. The
battery life service depends mainly on the use and storage methods.
2. Important Recharging Safety Instructions
- 5 -
Cutting-length Setting
Guide Combs: With 8 guide combs (3 mm, 6mm, 10mm, 13mm, 16mm,
19mm, 22mm, 25mm), the hair cutting length can be controlled as desired.
Taper Lever: Adjust the length of the blades. (Adjustment Range: 0.3-2mm)
The hair cutting lengths of using different guide combs are as follows.
Determine the hair cutting length.
Select the appropriate guide comb.
Fine-tune the blade.
- 6 -
1. Preparations Before Use
Guide Combs (mm) Hair Cutting Length (mm)
3
6
10
13
16
19
22
25
3-5
6-8
10-12
13-15
16-18
19-22
22-24
25-28
3 mm 6 mm
25 mm22 mm19 mm16 mm
13 mm10 mm
Note:
Adjust the blade length by rotating the taper lever from
forward to downward.
Cutting-length Setting
Assembly of the Blades
Align the guide comb with the blade edge.
Push it forward slightly to mount it.
- 7 -
2. Mount the Guide Comb
Note:
Please make sure that the guide comb is assembled tightly. If not, it may be loose
or come off.
Just pull out the guide comb outward to disassemble it.
3. Disassemble the Guide Comb
Note:
The direction of disassembly is the reverse direction of assembling it.
Bottom Blade
0.45~0.8mm
Rightmost Tooth of
the Bottom Blade
Rightmost Tooth
of the Top Blade
Blade Screws
Before leaving the factory, the clipper blades are placed in position. If the blades
are misplaced due to accidental collision during transport, or when the blades
need to be cleaned or even replaced after a period of use, the blades should be
adjusted according to the following methods.
Tabla de contenidos
