PCchips M717 Manual de usuario
The information presented in this publication has been
carefully checked for reliability; however, no
responsibility is assumed for inaccuracies.
Specifications are subject to change without notice.
Trademarks
IBM, PC/AT, and PC/XT are trademarks of
International Business Machines Corporation.
Intel and Pentium¨II are trademarks of Intel
Corporation.
AMI is a trademark of American Megatrends Inc.
MS-DOS and WINDOWS 95/NT are registered
trademarks of Microsoft Corporation.
ii
Contents
Chapter 1: Introduction ......................................................................1
Key Features ...................................................................................2
Unpacking the Mainboard & Static Electricity Precautions.....4
Chapter 2: Hardware Configuration................................................5
CPU Installation .............................................................................6
Installation Procedures...........................................................7
Mainboard Component Locations .............................................10
Connectors.....................................................................................11
PW1 Ð AT Power Connector ........................................11
COM1/2 Ð Serial Port #1/#2 .......................................11
PRN1 Ð Parallel Printer Connector..............................11
FDC1 Ð Floppy Disk Drive Connector........................11
IDE1/IDE2 Ð Primary/Secondary IDE Connectors .11
KBD1 Ð Keyboard Connector .......................................11
PS2/PS1 Ð PS/2 Mouse Pin Header/Connector .......11
VGA1 Ð VGA Connector...............................................11
J3 Ð ATX Form Card Connector ...................................11
J6 (2, 4, 6, 8, 10) (KY-LOCK) Ð Keylock & Power LED
Connector........................................................................12
J6 (1, 3, 5, 7) (SPK) Ð Speaker Connector.....................12
J6 (15, 16) (HD-LED) Ð HDD LED Connector............12
J6 (17, 18) (RST) Ð Reset Switch Connector ................12
FAN1 Ð CPU Fan Connector ........................................12
Sound Pro Connectors:.........................................................13
CD1/CD2 Ð Analog Audio for Sony/Panasonic ......13
J2 Ð Sound and Game ....................................................13
J1 (A)/(B) Ð Digital Audio OUT/IN ...........................13
Jumper Settings ............................................................................14
JP6 Ð DIMM Voltage Selectors .....................................14
JP2 Ð Microphone Type Selector..................................14
JP3 Ð CMOS RAM Clear Selector.................................14
Memory Installation.....................................................................15
iii
Chapter 3: ACPI Functions & Connectors with ATX Power.....16
PW2 Ð ATX Style Power Connector ............................16
Software Power-Off ..............................................................17
Modem Ring Power-On .......................................................17
Alarm Wake Up ....................................................................17
J6 (19, 20) (PWRBT) Ð ATX Power Button and Suspend
Switch Connector ..................................................................18
J4 Ð Wake On LAN Connector .....................................18
Chapter 4: BIOS Setup .....................................................................19
Entering BIOS Setup ....................................................................20
Default ...........................................................................................21
Load Optimal Settings .........................................................21
Load Best Performance Settings .........................................21
Setup Items....................................................................................21
Standard CMOS Setup .........................................................21
Advanced CMOS Setup .......................................................23
Advanced Chipset Setup .....................................................25
Power Management Setup...................................................27
PCI/Plug and Play Setup.....................................................29
Peripheral Setup....................................................................30
CPU Plug and Play Setup ....................................................31
Change Supervisor Password .............................................32
Auto-Detect Hard Disks.......................................................32
Save Settings and Exit ..........................................................32
Exit Without Saving..............................................................32
Chapter 1
Introduction
This mainboard is a highly integrated high-
performance mainboard based on the advanced
Pentium¨II microprocessor and featuring the high-end
AGPset chipset. The mainboard offers high flexibility
in configuration and is fully IBM PC/AT compatible.
2Chapter 1
Key Features
The advanced features of the mainboard include:
¥Supports Pentium¨II 233 ~ 333 MHz and Celeron
266 ~ 300 MHz CPUs with CPU Plug & Play feature
for faster and easier CPU installation at Slot1 for
AT Form Factor
¥Provides 2 DIMMs and 2 SIMMs for SDRAM/EDO
memory modules, memory expandable up to
256MB
¥Built in high performance 64bit 3D AGP Graphics
Accelerator with 8MB frame buffer
¥Supports Advanced Configuration Power Interface
(ACPI) and Legacy PMU and the Ultra DMA/33,
fully compliant to PC97 and PC98
¥Provides both AT/ATX power connectors, and
supports various functions of ATX power, such as
Suspend/Shutdown, Alarm Wake Up, and Wake
On LAN
¥Onboard PCI Bus Master IDE interface supports 4
IDE devices with 2 channels, 3 PCI, and 2 ISA slots
¥Onboard super Multi-I/O chip supports 2 serial
ports with 16550 compatible fast UART, 1 parallel
port with EPP and ECP capabilities, and one floppy
disk drive interface with 1Mb/s transfer rate
¥Provides PS/2 Mouse Pin Header, PS/2 Mouse
Connector, and ATX Form Card which containing
PS/2 Mouse, 2 USB interface, and Infrared
connectors (optional)
¥System BIOS supports TrendÕs ChipAwayVirus
function to ensure the entire boot process is virus-
free, no installation and configuration worries
¥Bundled PC-cillin97 (OEM) provides automatic
Virus Protection for Windows 95 and the Internet
Introduction 3
¥Onboard 3D Sound Pro meets PC98' SPEC and support
HRTF Positional Audio, Direct Sound 3D provide drivers
for 3D games that use Aureal software interface, Software
Wave-table Synthesizer, and Digital Audio Interface
(SPDIF) IN/OUT.
4Chapter 1
Unpacking the Mainboard & Static
Electricity Precautions
This Mainboard package contains the following items:
1. This Mainboard and the Device Driver
2. The Slot1 holder
3. This UserÕs Guide
4. Sound & Game ribbon cables/bracket
5. ATX Form Card (optional)
The mainboard is easily damaged by static electricity.
Follow the precautions below while unpacking or
installing the mainboard.
1. Do not remove the mainboard from its original
package until you are ready to install it.
2. Frequently ground yourself to discharge any static
electric charge that may build up in your body
while working on installation and/or
configuration. For example, you may ground
yourself by grasping an unpainted portion of the
systemÕs metal chassis.
3. Remove the mainboard from its anti-static
packaging and place it on a grounded surface,
component side up.
4. Handle the mainboard by its edges or by the
mounting bracket to avoid touching its
components.
5. Check the mainboard for damage. If any integrated
circuit appears loose, press carefully to seat it
firmly in its socket.
6. Do not apply power if the mainboard appears
damaged. If there is damage to the board contact
your dealer immediately.
Chapter 2
Hardware Configuration
Before you install the mainboard into the system
chassis, you may find it convenient to first configure
the mainboardÕs hardware. This chapter describes how
to set jumpers and install memory modules, and where
to attach components.
6Chapter 2
CPU Installation
This mainboard supports Intel Pentium¨II CPU using
a Single Edge Contact (SEC) slot. Make sure that you
have the following items (which should be included in
the package) before doing any installation. All parts
are labeled here with item numbers which will be
refered to in the Installation Procedures section. Item 1
and 2 together are the retention mechanism, please
refer to following procedures to complete your CPU
installation.
1) 4 screws:
2) 1 retention clip:
Tabla de contenidos
Otros manuales de Placa madre de PCchips
PCchips
PCchips M761 V1.x Manual de usuario
PCchips
PCchips M756T Manual de usuario
PCchips
PCchips M932LR Manual de usuario
PCchips
PCchips M581 Series Manual de usuario
PCchips
PCchips M921 Series Manual de usuario
PCchips
PCchips M902LU V3.0 Manual de usuario
PCchips
PCchips M810LMR 3.0x Manual de usuario
PCchips
PCchips P47G Series Manual de usuario
PCchips
PCchips M811LU Manual de usuario
PCchips
PCchips M863G Manual de usuario
PCchips
PCchips Motherboard Manual de usuario
PCchips
PCchips Tidalwave W30 Manual de usuario
PCchips
PCchips M758 Plus Series Manual de usuario
PCchips
PCchips M905ULR 3.2 Manual de usuario
PCchips
PCchips P51G Series Manual de usuario
PCchips
PCchips M848LU Manual de usuario
PCchips
PCchips Motherboard Manual de usuario
PCchips
PCchips M755LMR Manual de usuario
PCchips
PCchips M830LU Manual de usuario
PCchips
PCchips M786 Series Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
