PayFacto PAX A80 Manual del operador
PAX A80
Installation and Configuration
Guide
November, 2021
Contents
Introduction................................................................................................................................................... 3
Terminal Overview ....................................................................................................................................... 4
A80 Terminal Overview........................................................................................................................... 4
Terminal Hardware .................................................................................................................................. 5
A80 Communication Ports....................................................................................................................... 6
Terminal Setup and Configuration................................................................................................................ 7
Installing the Printer Paper....................................................................................................................... 7
Connect the Terminal Cables ................................................................................................................... 8
Configuring the Terminal Display Language........................................................................................... 9
Configuring the Terminal Network Connections................................................................................... 10
Configuring the Terminal Ethernet Connection..................................................................................... 11
Configuring the Terminal Wi-Fi Connection ......................................................................................... 12
Working with the Terminal ......................................................................................................................... 13
Powering the Terminal On or Off .......................................................................................................... 13
Terminal Input Options .......................................................................................................................... 14
Replacing the Printer Paper ................................................................................................................... 15
Card Payment Options ........................................................................................................................... 16
PAX A80 Configuration and installation
Copyright© 2021 PayFacto Inc. Page 3of16
•
•
•
•
◦
◦
◦
◦
◦
◦
•
◦
◦
◦
◦
Introduction
The PAX A80 countertop payment terminal is perfect for retail and bar/restaurant applications.
Thissetup guide describes the following topics:
A80 Terminal Overview
Terminal Hardware
A80 Communication Ports
Initial terminal configuration
Connect the Terminal Cables
Installing the Printer Paper
Configuring the Terminal Display Language
Configuring the Terminal Network Connections
Configuring the Terminal Ethernet Connection
Configuring the Terminal Wi-Fi Connection
Working with the terminal
Powering the Terminal On or Off
Terminal Input Options
Card Payment Options
Replacing the Printer Paper
PAX A80 Configuration and installation
Copyright© 2021 PayFacto Inc. Page 4of16
A80 Terminal Overview
This document will introduce you to your payment terminal as well as guide you through the process
of preparing and configuring it in order to quickly begin processing payments.
Your PAX A80 payment processing terminal comes with the following:
You may also have an RJ-11 (telephone) cable, but it is not used for terminal communication.
Payment terminal
1.
AC power cord
2.
Power adapter
3.
Roll of printer paper
4.
PAX A80 Configuration and installation
Copyright© 2021 PayFacto Inc. Page 5of16
Terminal Hardware
The following illustrations show the location of the main terminal features and hardware:
Contactless payment reader
1.
Color touchscreen
2.
Magnetic stripe reader
3.
Physical keypad
4.
Chip card reader
5.
PAX A80 Configuration and installation
Copyright© 2021 PayFacto Inc. Page 6of16
A80 Communication Ports
There are multiple communication ports on the back of the terminal with cable guides. The diagram
on the back of the terminal shows where to connect the communication cables, in addition to AC
power.
Cable guides
1.
Ports diagram
2.
Ethernet port
3.
Power port
4.
PAX A80 Configuration and installation
Copyright© 2021 PayFacto Inc. Page 7of16
1.
2.
3.
Installing the Printer Paper
If the supplied roll of printer paper was not already installed in the terminal when you received it, you
will need to install it before you can print any transaction receipts.
TIP: This procedure also applies to replacing a roll of
printer paper.
To install the printer paper:
On the back of the terminal at the top, lift the lever with the contactless logo to unlock and open the
printer cover.
NOTE: The printer cover opens on a hinge, it does not
come off the terminal.
Place the roll of printer paper in the paper tray, leaving about 2 inches (5 cm) of paper beyond the
printer'scutterasshowninthefollowingexample:
IMPORTANT! Make sure the paper unrolls from the
back of the roll, otherwise the printer will be unable
to print the transaction receipt.
Close the printer cover until it snaps into place and remove any excess paper.
PAX A80 Configuration and installation
Copyright© 2021 PayFacto Inc. Page 8of16
Connect the Terminal Cables
There are multiple connection ports on the back of the terminal. Countertop terminals generally
require AC power and Ethernet connections.
Your configuration may also include a connection to a POS system or an additional PIN pad.
Use the diagram on the back of the terminal to determine where to connect the cables that apply to
your configuration. The terminal’s connection ports are shown below:
PAX A80 Configuration and installation
Copyright© 2021 PayFacto Inc. Page 9of16
1.
2.
3.
4.
5.
6.
7.
Configuring the Terminal Display Language
By default, the terminal displays all information in English. This procedure explains how to change the
terminal’s display language if necessary.
IMPORTANT! Selecting a different language changes all
text that appears on the terminal.
To change the terminal display language:
Ontheterminal’smainscreen,touchtheSettings icon.
On the Settings screen, touch the Please Input Password field and use the keypad to type the
password: either 9876 or pax9876@@.
TouchthecheckmarkicononthekeypadwhenyouaredoneandtouchOK.
Scroll to the Personal section and touch Language & input.
Touch Language.
Scroll to and touch the desired language.
Touch the Back icon twice to return to the main screen.
PAX A80 Configuration and installation
Copyright© 2021 PayFacto Inc. Page 10of16
•
•
Configuring the Terminal Network Connections
The terminal requires a network connection to communicate with the payment processor server to process
transactions.
The PAX A80 is a countertop payment terminal that can connect to wired (Ethernet) and wireless (Wi-Fi)
networks.
Configuring the Terminal Ethernet Connection
Configuring the Terminal Wi-Fi Connection
Otros manuales para PAX A80
1
Tabla de contenidos
Otros manuales de Terminal de pago de PayFacto
PayFacto
PayFacto PAX D210 Manual de usuario
PayFacto
PayFacto PAX A920 Pro Guía rápida
PayFacto
PayFacto A80 Manual de usuario
PayFacto
PayFacto AMP 8200 Guía rápida
PayFacto
PayFacto PAX S80 Manual de usuario
PayFacto
PayFacto PAX A80 Manual de usuario
PayFacto
PayFacto PAX A35 Manual del operador
PayFacto
PayFacto PAX A920 Guía rápida
Manuales populares de Terminal de pago de otras marcas
Ingenico
Ingenico iWL250B Manual de usuario
Optimum
Optimum M4230 Manual de usuario
Triton
Triton RL5000 Manual de usuario
Ingenico group
Ingenico group Lane/8000 Manual de usuario
Gilbarco
Gilbarco FlexPay IV CRIND Manual de instalación y operación
Infinite Peripherals
Infinite Peripherals Infinea Tab Lite Manual de usuario
