Page 1
1. Introduction
The ENT-SDVoE10G is a network AV Transceiver with HDMI input and output supporting up to
4K@60Hz 4:4:4, HDR. It is designed for HDMI transmission over IP networks with external audio and
control signals using 10G switches, web browser or API’s to control a variety of functions.
The transceiver provides one of the most advanced IP Streaming solutions on the market utilizing BlueRiver™
technology, bringing various IP/AV standards to work together as one. It combines a variety of 4K IP
technologies and features one unified protocol using a simplified topology. Features include, uncompressed
video with zero-latency from transmitter to receiver, seamless switching, Video wall, Multi-view, 1G
Ethernet, IR, RS232, audio embedding/de-embedding, audio down-mixing, etc. It can be controlled by the IPA
Manager software.
Compares with traditional HDBaseT matrix AV Switching. The ENT-SDVoE10G is a low cost, easy to
install and flexible solution for high-definition signal switching. It is ideal for distributing AV over 10
Gigabit Ethernet in enterprises and other large-scale installations.
1.1 About 10G Network
Unlike traditional AV extension technology, such as HDBaseT, where transmitters and receivers are
connected point to point or joined together using custom matrix switches, the ENT-SDVoE10G is based on
the inter compatible BlueRiver™ technology and connected using standard, off the shelf 10G Layer 2/3
network switches.
This architecture makes use of data packages that can be easily and independently routed to the desired unit. A
variety of transmission modes is possible this way, from one unit to another unit (point to point) or one unit to
many units (point to multipoint) or many units to many units (multipoint to multipoint) with a software
controllable video wall integration.
An added benefit of packet data transmission is that each signal type (video, audio, RS232, etc.) is routed
independently and not necessarily to the same destination. For example, the HDMI video from a particular
unit is routed to other 4 units, while the audio goes to all receivers in the setup. This unlimitedly scalable and
independent signal routing enables multiple, scalable applications, including signal extension, splitting,
switching, matrix routing and video wall functionality.
1.2 Features
●Designed with BlueRiver™ technology
●Transceiver is software selectable, either Transmitter or Receiver
●Streams uncompressed video with zero latency
●Switch and route HDMI, RS232, IR and Audio independently
●Supports resolutions up to 4K/60Hz, 4:4:4
●Supports HDMI 2.0b, HDCP 2.2, HDR10 and Dolby Vision™
●Point-to-Point, Point-to-Multipoint & Multipoint-to-Multipoint
●Video Wall 9 x 9 and Multi-View up to 25 images
●Selectable output resolutions up to 4K scaling
●Receiver supports video preview
●Uses 10G Ethernet
●PoE (Power over Ethernet)
●Control: RS232, TCP/IP, Web Interface
