Paton ProTIG-200 Manual de usuario

PATON ProTIG AC/DC TIG/MMA - 2 -

CONTENTS

1. General provisions

2. Technical characteristics

3. Control elements designations, setting of the unit

3.1 Designation of parameters of all welding modes

3.2 Resetting the device to factory settings

3.3 Selecting the interface language

4. TIG AC welding cyclogram

5. Commissioning

5.1 Intended use

5.2 Placement requirements

5.3 Mains connection

5.4 Connection of the mains plug

6. Manual arc welding with coated electrode (MMA)

7. Handheld arc welding with a non-fusible electrode in an inert

gas environment (TIG AC/DC) 19

8. Pedal operation in TIG AC/DC mode

9. Maintenance

10. Storage regulations

PATON ProTIG AC/DC TIG/MMA - 4 -

11. Transportation

12. Technical data

13. Scope of delivery

14. Safety instructions

15. Warranty obligations

16. Acceptance certificate

- 5 - PATON ProTIG AC/DC TIG/MMA

1. GENERAL PROVISIONS

The PATON ProTIG-200/315-400V AC/DC argon-arc inverter is designed for arc welding:

- TIG AC/DC (constant/variable

current); - ММА (direct current);

- RIV (rivet weld mode).

The best offer for DC and AC welding of a wide range of materials: aluminum, aluminum

alloys (TIG AC mode), parts and materials made of steel, non-ferrous metals and copper

alloys (TIG DC mode). The unit can also be used for welding with coated electrodes (MMA

mode). The inverter provides excellent ignition and a constant and stable arc, highquality

welds and easy operation.

By increasing the frequency of the voltage supplied to the transformer, it is tens of times

smaller, which is why the unit has several times less weight and dimensions with the same

output parameters in comparison with the classic equipment.

Main advantages:

1. Contact and non-contact (built-in oscillator) arc ignition;

2. Storing up to 10 user-defined welding modes;

3. Button mode on 2T and 4T torches;

4. Foot pedal support for stepless adjustment (PED)

5. Pulse function in TIG AC/DC, MMA modes;

6. Increased reliability in dusty environments;

7. Availability of RIV rivet weld;

8. When the temperature reaches 100 ˚C, the power unit will shut down until the

temperature decreases;

9. All electronics in the unit are impregnated with two layers of high-quality varnish,

which ensures the reliability of the product during its entire service life;

10. Infinitely adjustable welding parameters;

11. Stabilization of arc burning in TIG AC/DC modes;

12. Adaptive control of the fan depending on the temperature;

13. The unit has a state-of-the-art digital interface with LCD display, which makes it

possible to adjust the machine to the welding mode;

14. Three interface languages are supported:

-English;

-Russian; - Ukrainian.

PATON ProTIG AC/DC TIG/MMA - 6 -

2. TECHNICAL CHARACTERISTICS

Main parameters

ProTIG-200

ProTIG-315-400V

Power supply

220V (190-260V),

50/60Hz

380V or 400V

(+/-10%) 50/60Hz

Welding current

5-200 A

25-315 A

Basic mode of operation

TIG АС/DC

Additional modes of operation

ММА, RIV

4.1

Interface languages

UA, ENG, RU

Protection class

IP21

Efficiency

Min. 80%

Maximum power input

6.3 kW

13.5 kW

ММА mode

10-200 A

25-315 A

TIG AC/DC mode

5-200 A

25-315 A

10.

No-load voltages

60-80 V

65 V

Load duration

11.

100% (DC)

126 A

180 A

12.

40% (DC)

200 A

315 A

13.

100% (АC)

140 A

200 A

14.

50% (АC)

200 A

315 A

General parameters

15.

Non-contact arc ignition

Yes

16.

Welding current indication

Yes

17.

Mode memory

10 programs

18.

Arc control

Yes

19.

Pulse function in TIG AC/DC, MMA

Yes

20.

Button mode on torch, TIG AC/DC

2Т, 4Т

20.1

Possibility of connecting a foot pedal

Yes

- 7 - PATON ProTIG AC/DC TIG/MMA

Cyclogram parameters in TIG AC/DC modes

21.

Safety gas time before welding

0.1-25 sec

22.

Adjusting start current

5-185 A

25-300 A

23.

Adjusting current ramp up time

0-15 sec

24.

Adjusting current decay time

0-25 sec

25.

Adjusting end current

5-185 A

25-300 A

26.

Post weld safety gas time

0.1-25 sec

27.

AC frequency

15-200 Hz

15-70 Hz

28.

Polarity balance for AC welding

15-90%

20-80%

Pulse function parameters

29.

Pulse frequency

1-200 Hz

1-100 Hz

30.

Pulse balance

15-85 %

31.

Lower current

5-195 A

25-300 A

RIV mode parameters

32.

Point time

0.5-10 sec

0.1-10 sec

33.

Peak current

5-200 A

25-315 A

Functions in MMA mode

34.

AntiStick

ON/OFF option

35.

HotStart

Adjustment

1100%

Adjustment 0-100%

36.

ArcForce

Adjustment

1100%

Adjustment 0-100%

Mass and dimensions

37.

Dimensions

465х150х350 mm

380х480х330

38.

Weight

12.5 kg

23 kg

Connection to the power line/power panel (at 25ºC) WARNING!

Consider wall and other extension cords!

PATON ProTIG AC/DC TIG/MMA - 8 -

3. CONTROL ELEMENTS DESIGNATIONS, SETTING OF THE UNIT.

Fig. 3.1 Device control panel

“Mode” button – welding mode switching;

“Program” button – user program selection;

- 9 - PATON ProTIG AC/DC TIG/MMA

“Enter” button – saving the welding mode to the memory;

“Up” button – parameter setting (more);

“Down” button – parameter setting (less);

“Right” button – welding parameter selection;

“Left” button – welding parameter selection;

LCD display – for displaying welding mode parameters;

Fig.3.2. Basic controls

1. Welding mode display. It is switched with the "Mode" button and can be:

-TIG AC handheld argon-arc welding with a non-fusing tungsten electrode at

alternating current.

-TIG DC handheld argon-arc welding with non-fusible tungsten electrode at

direct current.

-MMA handheld argon-arc welding with a coated fusible tungsten electrode

at direct current.

-RIV rivet weld mode.

2. The number of the user program is displayed. It is switched with the

"Program" button; the maximum number is 10.

3. Parameter name of the selected welding mode is displayed. Each mode has

its own set of parameters. It is switched with "Right" and "Left" buttons.

4. The values and units of the selected welding parameter are displayed. They

are switched with "Up" and "Down" buttons.

5. Device condition indicators:

Otros manuales para ProTIG-200

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de soldadura de Paton

Paton

Paton ADI 160 STANDARD Manual de usuario

Paton

Paton VDI 150 MINI Manual de usuario

Paton

Paton Cooler-7 Manual de usuario

Paton

Paton MultiPRO-250 Manual de usuario

Paton

Paton PRO-315-400V Manual de instrucciones

Paton

Paton STANDART-350-400V Manual de usuario

Paton

Paton MultiPRO Series Manual de instrucciones

Paton

Paton PRO-160 Manual de instrucciones

Paton

Paton STANDARDTIG-160 Manual de usuario

Paton

Paton StandardMIG-160 Manual de usuario

Paton

Paton Feeder-15-2 Manual de instrucciones

Paton

Paton StandardMIG-160 Manual de instrucciones

Paton

Paton ProTIG-200 Manual de usuario

Paton

Paton MultiPRO-250 Manual de usuario

Paton

Paton PSI 160 Standard Guía

Paton

Paton ProCUT-40 Manual de usuario

Paton

Paton EuroMIG Manual de usuario

Paton

Paton VDI-160E Manual de usuario

Paton

Paton MINI Manual de usuario

Paton

Paton ECO Series Manual de instrucciones

Paton

Paton ADI 200 PAC Manual de usuario

Paton

Paton STANDARDTIG-160 Manual de usuario

Paton

Paton PRO-160 Manual de usuario

Paton

Paton StandardMIG-160 Manual de usuario

Manuales populares de Sistema de soldadura de otras marcas

Berner

Berner PLASMACUT 54 Manual de usuario

Pro Spot

Pro Spot PR-155 Manual de usuario

Forney

Forney 210 Manual de usuario

Thermal Arc

Thermal Arc 400S Manual de usuario

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manual de usuario

GYS

GYS PROTIG 201 AC/DC Manual de usuario

TAFA

TAFA 30*8B35 Manual de usuario

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manual de usuario

ESAB

ESAB Buddy Arc 145 Manual de usuario

CIGWELD

CIGWELD 636804 Guía rápida

Red-D-Arc

Red-D-Arc DC-400 Manual de usuario

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manual de usuario

Elettro

Elettro HI-MIG 3000 SYNERGIC Manual de usuario

WIA

WIA Weldmatic 270 CP132-2 Manual de usuario

Sonics

Sonics H520T Manual de usuario

Miller

Miller Big Blue 400D Manual de usuario

NewArc

NewArc RT2000 Guía de inicio rápido

Hypertherm

Hypertherm powermax1000 Manual de usuario