Parrot Products OP0452A Manual de usuario
User Manual Tel: (RSA) 010 140 4900 / Email: [email protected] www.parrot.co.za Projector DLP XGA 3500 Ansi Long Throw- OP0452A
Table of Contents
Key safety instructions ....1Introduction....................... Projector features.......................................3Shipping contents .....................................4External appearance of the projector ........5Device control and functions .....................6Projector Positioning.....12Projection Dimension...............................13Connection.......................14 Connecting to Video source devices .......16Connecting to HDMI devices ...................17To connect the projector to a Component Video source device: ............17Connecting to composite video source devices ....................................................18Operation .........................19Disabling the password function ..............21Setting a password ..................................21If you forget your password .....................21Entering the password recall procedure ................................................22Change Password ...................................22Disabling the password function ..............22Switching input signal ..............................23Changing HDMI input settings .................24Adjusting the projected image .................25Perform keystone correction.....................26Zoom out to see details ...........................27Selecting the aspect ratio ........................27About the aspect ratio...............................28Optimizing the image ...............................29Using Screen Color ..................................29Fine-tuning of image quality in user modes ..............................................30Choosing a location..................................12Hiding the image.......................................34Locking control keys ................................34Lamp Settings...........................................34Extending lamp life ...................................35Timing of replacing the lamp ....................36Replacing the lamp ..................................36Operations at high altitudes .....................363D functions..............................................37Switch off the projector .............................37Menu operations ......................................38Description of each menu ........................41Maintenance.....................45LED Indicator ...........................................46Troubleshooting...............47 ..................48 Projector specifications ............................48Dimensions ..............................................49Ceiling mount installation..........................49Timing chart ............................................50Setting the presentation timer...................32Connect to the computer or monitor .......15Activate the projector................................19Care of the projector.................................45
11
Key safety instructions
Design and testing of your projector has been carried out in compliance with the latest safety standards for information technology (IT) devices. However, it is extremely important for you to follow the instructions and product labels provided in this manual during use to ensure user safety.Safety Instructions ●Please read through this manual before using the projector. Save it for future reference. ●Do not look straight at the projector lens during operation. The intense light beam may damage your eyes. ● ●Always open the lens shutter or remove the lens cap when the projector light source has been switched on. ●In some areas there may be line voltage instability. This projector is designed to operate safely within a mains voltage between 100 to 240 volts AC, but could fail if power cuts or surges of ±10 volts occur. In areas where the mains voltage may a power stabilizer, surge protector or uninterruptible power supply (UPS). ●Do not obstruct the projection lens with any objects when the projector is switched on. ●Place the projector on a flat, stable surface to avoid any damage. ●Do not attempt to disassemble this projector. The projector contains high voltage parts that may cause electrocution or death when it comes in contact with the human body. Do not disassemble or remove any covers. ●Do not place this projector in any of the following environments. - -Environments of extreme heat or cold. -Areas that are extremely humid, dusty, or smoky may contaminate optical components, shortening the projector's life span and darkening the image. - -Locations with altitudes greater than 3000 m (10000 feet).
2 ●Do not block the ventilation holes. If the ventilation holes are seriously obstructed, -Do not place this projector on a blanket, bedding or any other soft surface. - ●Do not step on the projector or place any objects on top of it. These acts may damage the projector itself as well as cause accidents or personal injury. ●Do not place liquids near or on the projector. Liquids spilled into the projector may cause damage. If the projector does become wet, please unplug the power cable from the power socket and contact your local repair center for repairs. ●This product can be mounted on a ceiling suspension mount for back projection.Use only ceiling suspension mounts that meet the relevant requirements and ensure that the installation is safe. ●When the projector is under operation, you may notice some heated air and odour from its ventilation grill. It is a normal phenomenon and not a product defect. ●Do not use the safety lever during transport or installation purposes. The safety lever should only be used with the anti-theft cables sold on the market.Safety instructions for ceiling mounting of the projectorIf you intend to mount your projector from the ceiling, ensure suitable projector ceilingmount bracket and that it is securely and safely installed.There may be safety risks if you fail to use an appropriate projector ceiling mounting kit. the projector to fall from the ceiling.You can purchase a projector ceiling mounting bracket from Parrot Products (Pty) Ltd. the projector may overheat resulting in a fire.Do not place near flammable objects.
3
Introduction
Projector featuresThe projector integrates high-performance optical engine projection and a user-friendly design to deliver high reliability and ease of use. The projector offers the following features. ●Compatible with NTSC, PAL, SECAM and HDTV ●D-Sub 15-pin terminal can be connected to analog video ●Equipped with HDMI connection, supports HDCP (PA501S with no such features) ●Multi-language On-Screen Display (OSD) menus ●Digital keystone correction to correct distorted images ●RS-232 interface supports serial control ●The power saving mode reduces the lamp power consumption by up to 30% when no input signal is detected for a set length of time. ●Presentation timer for better control of time during presentations ●3D Ready supported ●Select Fast Shutdown ●Colour management can be used to adjust the colour according to your preferences ●The screen type correction function can be projected on a variety of pre-set colour surfaces
Note
●
The information in this manual is subject to change without notice.
●
Without the express written consent, reproduction, transfer or photocopying of this document in full or in part is prohibited.
4ContentsCarefully unpack the product and check thany of these items are missing, please contact your place of purchase.The supplied items will be suitable for your region, and may differ from those illustrated.ProjectorPower cordPatternAspectPgUpPgDnFreezeBlankColorModeOnOffVIDEOHDMICOMPSourceAutoSync
VGA cableRemote controlat you have all of the items shown below. If
5External appearance of the projectorFront / rearSideTop / bottom
Warning
●This equipment must be connected to earthed connection. ●convenience. If failures or errors occur during equipment operations, use the power interruption device to cut the power or unplug the power cable from the socket.
6Device controls and functions1.
123467856
Turn the projector power on or off.2. (POWER LED indicator)Please refer to "LED indicator message".3. (TEMP LED indicator)Please refer to “LED indicator message”.4. (LAMP LED indicator)Please refer to "LED indicator message".5. SOURCEA source selection bar display.6. / (Keystone button)Manually corrects distorted images resulting from an angled projection.Left/Right/Up/Down (Navigation button)Selects the required menu option to make adjustments.7. MENU/EXITMenu: Displays or exits the on-screen display menu.Exit: Returns the previous OSD menu, exits and saves the menu settings.8. ENTEREnter the selected on-screen display (OSD) menu item.
7Remote control1.Power2.Computer3.Auto Sync4./Keystone button/// direction button5.My button6.Menu7.Mouse (right button)Mouse (left button)8.9.Mouse10. Lock/ID Set(no function)11.Timer12.Volume13.14.15.
Scale ratio
16.HDMI17.YPbPr (no function)19.Enter20.21. Page up18.Input sourceExitLamp Eco modeAudio mode12344456789101112131441516171819202122.Page down222323. Test pattern2424.Blank screen2525. Help26.Magnify27. Color mode28.Mute262728
8Using the remote control cursor.1. cable to the projector Mini USB port and the other end to the PC or notebook computer. See “Connect to the computer” for details.2. Change the input signal to D-Sub or HDMI via PC source.3. To use the software displayed on the connected computer (such as Microsoft PowerPoint), go to the previous or next page by pressing the previous page / next page.Remote control effective rangeThere is an infra-red (IR) remote control sensor located at the front of the projector. Holdthe remote control and maintain a perpendicular angle within 30 degrees with the IR remote control sensor to achieve normal remote control functions. The distance between the remote control and the sensor should not exceed 8 meters (about 26 feet).Do not obstruct the IR sensor on the projector as this may block the IR beam.
Note
●
Operate the remote control where you can see the remote sensor.
●
Do not shake or drop the remote control.
●
Store the remote control in a cool, dry place.
●
Do not spill water on the remote control or place moist objects on it.
●
Do not disassemble the remote control.
Approx. 30°
connect
Tabla de contenidos
Otros manuales de Proyector de Parrot Products
