Parrot Products VC1080C Manual de usuario
User Manual
Tel: (RSA) 010 140 4900 / Email: [email protected]
www.parrot.co.za
Video Conference Camera Full HD 1080P
- VC1080C
1
Please read this manual in detail and use accordingly.
This manual introduces the functions and operations of the video conference camera.
This colour video camera is high-quality and flexible with a remote pan of 355° / tilt 120°
operation and image flip, and a DSP dealing integration module input. Support VISCA
and PELCO P/D protocol. Allowing install action on the ceiling / desk and a accurate
remote control of RS323/485.
Safety requirement
To avoid damage to the camera and connecting equipment, please follow the
instructions carefully.
• Ensure the device is properly installed and maintained.
• Only professional technicians can install and perform maintenance.
Do not expose the device to wet or humid
environments.
• Use original accessories as supplied.
• Once product exchange or repair occurs please use universal meter test before using,
should the device require any repairs.
• Please use a soft and dry cloth for cleaning.
• Do not use strong chemicals as this may damage the camera or lens.
• Mounting bracket must allow for 3 times the weight of camera
Features
• 1080p full HD PTZ camera
• Pan 355°, Tilt 60°
• The latest developed digital signal processor (DSP)
improves the image quality of digital zoom.
• Multi function IR remote controller can control PTZ,
Lens and other functions conveniently.
• Use the PC to control camera with VISCA or PELCO command.
Baud rate: 2400 / 4800 / 9600
• 9 preset positions by remote controller, 200 preset positions by PC or remote
control unit, memory auto saved when powered off.
• The maximum speed of horizontal rotation: 80°/s, Tilt: 60°/s.
• Providing accurate remote control.
Video Conference Camera overview
Please ensure all parts are included.
1 x Video camera
1 x Power adapter
1 x Remote controller
1 x USB wire
1 x Ceiling bracket
Includes:
1 x USB wire
1 x Ceiling bracket
1 x Video camera
1 x Remote controller
1 x Power adapter
2
Parts and Introduction
Front
Rear
1 Lens
2 Sensor for the Remote Control
3 Power lamp
4 Standby lamp
5 DC IN 12V input
6 USB output
7 RJ-45 output
5 6 7
Bottom
8 Bottom switch
(See page 9 for details)
3
4
Connection instructions
If the preset number 1 is set, after the camera is switched on, the camera’s pan/tilt/zoom
will automatically call the present point 1. If the preset number 1 is not set, the camera
will return to the HOME position, that is, the lens will return horizontally and vertically to
the front, and the zoom will be minimized.
Please ensure all connections are correct before use.
RJ45 cable
USB cable
Power To Ethernet
To PC
Attention
5
Remote Controller
1. IR transmitter
2. Power
3. L/R Direction set
4. Focus: (auto or manual)
5. M-open: open the menu
6. Close the menu
7. Button for Brightness adjustment
8. PAN-tilt reset
9. Camera select: (match to IR Select back)
10. Position: (Number area; Preset: press PRESET then press 1-9 for
setup preset position)
11. Preset: (Press RESET and then press 1-9 for eliminate preset position)
12. ZOOM
SLOW T
SLOW W
FAST T
FAST W
13. Pan-tilt: HOME for return middle position
14. Std rev: (Press L/R Direction Set,
and then Press 1 or 2)
15. Back Light
16. Switch for screen information display
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
6
Remote Commander Operation
A. Pan/Tilt control
1. Power on, Pan/Tilt will be initial position.
2. Press arrow to adjust pan/tilt direction, when watching
a video on screen, the direction can be moved by pressing
the arrow step by step or continuously for wild turning direction.
If you want to fix direction, please press arrow (up or down)
and arrow (left or right) at the same time.
3. Press HOME for front direction.
4. Press PAN-TILT RESET or switch off and on to reset the
direction to the initial position.
5. Press L/R DIRECTION SET and STD or REV at the same
time, then by pressing the right or left arrow, the direction
can be moved right or left.
ATTENTION:
When you use more than one command, please repeat operation accordingly.
B. Adjust Camera
Focus
• Press AUTO for focus auto
• Press MANUAL and then adjust far or near by pressing FAR (+) or NEAR (-)
ATTENTION:
In the instance of far focus, it is normal for the image to blur during pan/tilt operation.
Maintenance Description
7
ZOOM
Adjust T and W for far or near zoom
One Remote controller for operating 3 or less cameras
1. Maximum of 3 cameras can be controlled by a
remote controller through back switch 1, 2, 3.
2. Press CAMERA SELECT 1 or 2 or 3, to control
corresponding 1, 2, 3 camera.
Camera select button 1, 2, 3 will
light up when selected.
Use back light compensation
• If there is lighting on the back of the focused
object, the object will appear black.
Press BACK LIGHT to avoid this happening
and turn select off button to close.
8
C. Preset Position Operation
• Store camera settings-presets up to 200 presets can
be set (Location, zoom, focus, and the background light)
set and call 9 preset positions by remote controller.
Through a user-defined protocol over 200 presets can
be set
1. Recognize that the STANDBY led is not blinking.
If the STANDBY indicator is flashing, press PAN-TILT
RESET to restore.
2. Adjust the camera position, zoom, focus and the
background light.
3. Press and hold the PRESET button, then press one of
the position 1-9.
• Use preset position
Press any button of 1-9 position.
• Cancel preset position
Press RESET, then press 1-9 simultaneously.
While
pressing
While
pressing
9
Bottom switch
Normal or ceiling setting the
remainder being reserve switch.
Bottom switch
OFF
ON
USB Dial Switch Control Select
1
ON
OFF
2
ON
OFF
3
ON
OFF
4
ON
OFF
ON
OFF
ON
OFF
NC
NC
NC
Firmware Upgrade
Motherboard Upgrade
Install method
Ceiling install
Normal install
Note: The 1st & 2nd bottom switch is for upgrade,
do not leave on during use.
The Menu
Main Menu
Communication sub menu
Main Menu:
COM SETTING: enter the communication
settings sub menu
PTZ SETTING: enter PTZ setting sub menu
PICTURE SETTING: enter image settings
sub menu
VIDEO FORMAT: cannot be set, displays
current resolution
VERSION: cannot be set, displays current
software version
FACTORY RESET: restore factory defaults
SAVE AND EXIT: save and exit
Communication sub menu:
PATCH: cannot be set
(only for binocular tracking)
PROTOCOL: set communication protocol,
VISCA / PELCO-P / PELCO-D / VISCA2
ADRESS: set the camera address ID
BAUD RATE: set the communication
baud rate, 2400/4800/9600/19200/38400
/115200
DIV GRADE: can set the speed range
of PTZ movement (only valid for the serial port
control speed), 1-24/1-64/1-100
SPEED ACC: PTZ motion acceleration can
be set (only valid for serial port control
speed), 1-10
COM SETTING
PTZ SETTING
PICTURE
SETTING
VIDEO FORMAT: 1080P30
VERSION
FACTORY RESET
SAVE AND EXIT
Menu
PATCH:
PROTOCOL:
ADDRESS:
BAUD RATE:
DIV GRADE:
SPEED ACC:
Menu
MAIN
VISCA
1
9600
100
1
Tabla de contenidos
