Paramotor PXP Meter Manual de usuario
Welcome
PXP Meter
APP
to
“ Where you will
only find a problem,
if you have tried it
you can never
be without it ”
2
Index
3
4- When shopping includes
5- Battery - Types and installation
8- Simple Manual
9- Switchboard Installation
11 - Sensor - Fuel Installation
12 - Sensor - RPM Installation
13 - Sensor - Pressure Installation
14 - Sensor - CHT Installation
15 - Sensor - EGT Installation
19 - Sensor - H2O Installation
20 - Installation Sensor - Cable Mass
21 - Installation Connectors
25 - Application - Installation Manual
27 - How We register
28 - First Notification
29 - How to connect the Bluetooth
31 - How to set up the Data
33 - Enter Fuel
34 - How to match the Bluetooth
35 - How We started
37 - Buttons and Data - Sound Button
38 - Data Batteries - Altitude
39 - Alarms
40 - RPM Alarm
41 - Battery Alarm
42 - Fuel Alarm
45 - CHT + EGT Alarms
46 - H2O Alarm
47 - EGT Data
48 - CHT + RPM Data
48 - Types of Revolutions
50 - Fuel data
52 - Fuel Marker
54 - Speed - Distances data
54 - Speed and Media Data
55 - Total Distance Data
55 - Distance Straight line Data
56 - Chronometers
57 - Clock + Compass Data
58 - Pressure + Variometer Data
59 - Amb Temp + Humidity Data
60 - g Force + Sound + Coordi-
nates Data
61 - Buttons Parts
62 - Manual - Home Screen
63 - Manual - English Screen
63 - Meter Screen - GPS FREE
65 - English Parts - General
66 - Part - General - SOS
70 - Part - General - Totals
76 - Part - General - Data
82 - Part - General - Routes
84 - Part - General - User
87 - Part - General - Messages
90 - Part - General - Conditions
102 - Part - Extras - Consump-
tion
103 - Part - Extras - Shooting
112 - Part - Extras - Converter
113 - Part - Extras - Compass
114 - Versions Download
115 - Links Videos
When you purchase, the PXP Meter includes:
1 - 1 Protective and organization Briefcase.
2- 1 Switchboard with VGA connection.
3- 1 VGA sensor connections + cables + watertight sensor connections.
4- 1 Fuel Sensor + cable + three-pin watertight connection.
5- 1 Pressure, temperature and humidity Sensor + cable + four-pin watertight connection.
6- 1 EGT temperature sensor + nut to solder the exhaust + cover screw + cable + 2 pin
watertight with yellow connection.
7- (only if you have purchased the version CHT) 1 CHT temperature Sensor (14 mm) +
cable + 2-pin watertight with green connection (see other spark plugging measurements).
8- (only if you have purchased H2O version) 1-H2O temperature Sensor + cable + 2 pin
watertight with blue connection (see options for pipe connection measures)
9- Revolution Counter Sensor + cable + 1 pin watertight with red connection.
10 - Ground Cable + terminals + 1 pin watertight with black connection.
11 - Connectors + 3 Cable connections to a 12 V external battery + terminals.
12 - 2x screw clamps with plastic from 12/14/16 mm each, screws for clamps, flanges, va-
rious heat shrinks, a cordura cover for cables and several ones for the correct assembly.
13 - Installation and operation manual.
4
What type of Battery does the PXP Meter use?
The PXP Meter is powered by a 12
volt battery.
You can use different types of batteries:
1 -We supply a battery (optional, you can buy
separately): Rechargeable lithium USB Battery
(Li-Ion) from 5v to 5600mAh, another from
12v to 3800mAh, also with USB + 12 volt out-
put + switcher + LED status charge + charger.
We provide you with the serial cable and con-
nection terminal. Measures: 95 x 60 x 20 mm
(recommended small and practical).
2-You can have power in your engine (for
example if you have an electric starter).
We provide you with the serial cable and con-
nection terminals.
3-You can use a type of battery car starter of
the latest generation with different types of
capacities.
We provide you with the serial cable and con-
nection terminal. (See next page).
Battery offered by PXP Paramotor
5
You have to keep in mind that the biggest the heaviest
it is and this can make it difficult to install it for exam-
ple if we are going to use the PXP meter in flight with
Paramotor, but it is neither a big problem.
We are going to supply you with from the series de-
pending on the battery chosen all the connectors and
connection cables, you will find everything prepared
for the connection and power of the PXP Meter.
How to buy the latest generation of car battery starter?
You can search on Google: car battery starter or battery starter
or search on Amazon = car battery starter.
You will find hundreds of offers, if you're only going to use it
for the PXP meter, we recommend you to buy the smallest
(6000-8000 mAh, that usually cost between about €25-45, but
there are more expensive) as we have told you the PXP Meter
does not consume much electricity.
Well if you prefer this battery starter is very interesting also to
carry it in the car, caravan, etc or used to charge the mobile or
tablet, you have flash light and other 1000 uses, you can buy
a bigger one.
6
1 - Supplied connectors and cables
3 - Battery installation
-small Starter
2 - Installation with Battery PXP Meter
3 - Battery installation
-great starter
7
Simple Manual
1-Install the switchboard.
2-Install the sensors.
3-Connect the sensors with the switchboard.
4-Download the PXP Meter App.
5-Install the PXP Meter App
6-Connect the battery to the switchboard.
7-Match the Bluetooth.
8-Go on the screen of the PXP Meter App.
9-Connect the Bluetooth.
10 -Configure the PXP Meter App.
Although you see a long and ex-
tensive Manual, do not confuse
the PXP Meter is very easy to as-
semble, set up and work with.
We've just put everything very
detailed.
You will do with it at the moment
of use and you will not find any
problem.
We have already been responsi-
ble for everything to work at
100%.
8
““The PXP Meter is ready to work and
offer you all the data for hours and
hours, without rest."”
Installation of the Switchboard
The installation of the Switchboard is very simple.
We will supply as standard: 6 screw clamps with plastic protection 12mm / 14mm / 16mm
x 2 of each (other sizes on request), 2 screws of 6mm x 20mm and 2 velcro straps + battery
fasteners.
With these clamps and the threads installed in the Control Unit, we will be able to install our
Control Unit in any position we wish.
Let's give a practical example of mounting on a Paramotor.
Depending on whether we need to disassemble the Paramotor chassis we can choose one
place or another, however we recommend installing it in a fixed place (away from the fuel
tank inlet or the engine exhaust = heat) and that does not affect the assembly or disassembly
of the Paramotor chassis and so we have our Control Unit always fixed, much better.
Clamps + screws
and threads Switchboard NOT about input fuel NOT by engine exhaust
9
4 - We focus and tighten
screws in threads Battery 5 - Paste Battery velcro 6 - We set Battery with
tape and velcro
1 - We chose site to install 2 - Check measurement tube 3 - We introduce
clamps + Velcro
10
Tabla de contenidos
