Paradyne 7610 Guía de instalación

TM

1

7610-A2-GK40-00 September 1997

Model 7610 SNMP DSU

Firmware Update and Errata

Document Number 7610-A2-GK40-00

September 1997

Overview

This document shows features changed with firmware releases up to

01.05.00 and corrections to the

Model 7610 SNMP DSU User’s Guide

(7610-A2-GB20-00).

Port LEDs

The description of the TXD and RXD LEDs are incorrect in the User’s Guide.

TXD – Transmitted Data:

ON – Receiving all 0s from the DTE.

OFF – Receiving all 1s from the DTE.

Blinking – User data is being transferred.

RXD – Received Data:

ON – Sending all 0s to the DTE.

OFF – Sending all 1s to the DTE.

Blinking – User data is being transferred.

2 7610-A2-GK40-00

September 1997

System and Test Status Messages Clear Function

The System and Test Status information screen described on pages 6-5–6-7 has

a new virtual function key, Clear. Select Clear and press Return to clear status

messages for one-time events such as Device Fail and Memory Fail.

Configuration Options

The default LADS Timing source has changed, affecting Table A-1 in

Appendix A.

Table A-1. System Options

LADS Timing

Possible Settings: Internal, External, Receive

Default Setting: Internal

Determines the timing source for the unit.

LADS Timing option appears when Operating Mode is set to LADS.

Internal – Timing is derived from the unit’s local clock. Use this setting for the LADS

primary timing unit that establishes the timing for both point-to-point units.

External – Timing is derived from the external clock provided by the DTE connected to

the V.35 interface on circuit CT113 (pins U, W).

NOTE: The valid rate generated by the DTE must be equal to the LADS line rate

minus the configured rate of 1600, 4000, or 8000 bps for the IMC, if

enabled.

Receive – Timing is derived from the line receive signal unless the unit is running

diagnostic tests. During the tests, the timing source is the internal clock. This setting

should be used for a LADS secondary timing unit.



*7610–A2–GK40–00*

Otros manuales para 7610

1

Tabla de contenidos

Otros manuales de Accesorios de red de Paradyne

Paradyne

Paradyne 7110 Manual de usuario

Paradyne

Paradyne AIM24000 Manual de usuario

Paradyne

Paradyne 7610 Manual de usuario

Paradyne

Paradyne Hotwire 5546 Manual de usuario

Paradyne

Paradyne COMSPHERE 6800 Series Manual de usuario

Paradyne

Paradyne COMSPHERE 6800 Series Manual de instalación

Paradyne

Paradyne 8820 Manual de usuario

Paradyne

Paradyne COMSPHERE 6800 Series Manual de usuario

Paradyne

Paradyne Hotwire 8620 Manual de usuario

Paradyne

Paradyne FrameSaver SLV NNI Manual de usuario

Paradyne

Paradyne COMSPHERE 6800 Series Manual de usuario

Paradyne

Paradyne 8820 Manual de usuario

Paradyne

Paradyne Hotwire 7975 Manual de usuario

Paradyne

Paradyne Hotwire 8620 Manual de usuario

Paradyne

Paradyne Hotwire 6038 Manual de usuario

Paradyne

Paradyne 7110 Manual de operación y mantenimiento

Paradyne

Paradyne 3172 Manual

Manuales populares de Accesorios de red de otras marcas

Valcom

Valcom VIP-804 Manual de usuario

SKUTCH

SKUTCH BA-1000 Manual del producto

QUNDIS

QUNDIS RNN5 Manual de usuario

Asus

Asus AAEON FWS-2365 Manual de usuario

Sophos

Sophos XG 85w Manual de usuario

AMCI

AMCI RBE2-8 Manual de usuario

Patton electronics

Patton electronics 2888 Manual de usuario

Cradlepoint

Cradlepoint COR IBR1100/IBR1150 Manual de usuario

Infra Cool

Infra Cool F-1.3 Manual de usuario

Edgewater Networks

Edgewater Networks 4300T Manual de usuario

Edimax

Edimax SB-2200g Manual de usuario

Extreme Networks

Extreme Networks Mogul-100 Manual de usuario

Aaeon

Aaeon FWS-8500 Manual de usuario

Panduit

Panduit Z11C Series Manual de usuario

F5

F5 BIG-IP 10000 Series Instrucciones de montaje

ZyXEL Communications

ZyXEL Communications NMA1115 Manual de usuario

Auerswald

Auerswald COMtrexx Business Manual de usuario

Actisense

Actisense QNB-1-B Manual de usuario