Pannin re-enforcer Manual de usuario
BODY CAMERA
User Manual
1- RE-ENFORCER OVERVIEW
2
- UNIT DESCRIPTION & OPERATION
2.1- POWER ON & OFF the RE-ENFORCER
2.1.1- “Power on and record” hotkey
2.4- RESET THE RE-ENFORCER
2.5- VIDEO RECORDING
2.6- VOICE RECORDING
2.7- PHOTO CAPTURING
2.8- INFRARED LIGHT SETTINGS
2.9- MICROPHONE SETTINGS
2.10- LCD DISPLAY SETTINGS
2.11- SOS BUTTON FUNCTIONS
2.12- PLAYBACK
2.13- PTT FUNCTION FOR TWO WAY RADIO
2.14- ADDITIONAL CAMERAS
2.15- MENU SETTINGS
2.15.1- Resolution
2.15.2- Photo Size
2.15.3- Record File Size
2.15.4- InfraRed Cut
2.15.5- Flicker
2.15.6- Motion Detection
2.15.7- G-Sensor Set
2.15.8- Over Speed Recording
2.15.9- Pre-Record
2.15.10 Post Record
2.15.11- Car Mode
2.15.13- Auto LCD O
2.15.14- Auto Power O
2.15.15- Mic Auto Resume
2.15.16- Date Format
2.15.17- GPS Auto Update Time
2.15.18- GMT Setup
2.15.19- DST Setup
2.15.20- Language
2.15.21- Volume
2.15.22- Indicator
2.15.23- RF Switch Setup
2.15.24- RF Recode
2.15.25- Auto MSC
2.15.26- Free Space
2.15.27- Ocer ID
2.15.28- Firmware Version
2.15.29- Default Setting
2.16- GPS FUNCTION
2.16.1- GPS On
2.16.2- GPS Playback
3- TROUBLESHOOTING
2- RE-ENFORCER OVERVIEW
RE-ENFORCER is a multi function compact DVR, designed by
our engineers to meet and exceed the actual needs of the police ocers,
law enforcement personnel and all other occupations where an actual
footage of the action would be required or helpful. It is life-proof design
makes it withstand and function in extreme conditions, day and night.
RE-ENFORCER streamlines the entire process of law enforce-
ment data collection and evidence gathering by providing crucial data
synchronized with video, audio, and photo evidence while keeping the
data encrypted to prevent tempering.
IMPORTANT: RE-ENFORCER Should be fully charged for at
least 6 hours prior to the rst use. Red indicator LED on the front side
of the RE-ENFORCER will turn on while charging and will turn green
when the battery is fully charged. Green LED indicator on the opposite
side will turn on when the device is on and will ash while recording.
Press and hold the Record Button for 3 seconds. RE-ENFORCER
will automatically turn on and start recording.
To ensure rapid charging select charge on the menu when connected to
5V DC USB power supply.
2- UNIT DESCRIPTION & OPERATION
1- Menu Button
2- Up Button
3- Down Button
4- OK Button
5- Clip Rail
6- LCD Screen
7- Audio Record Button
8- Photo Capture Button
9- USB Port
10- HDMI Port
11- LED Indicators
12- Charger Input
13- SOS Button
14- InfraRed Light On-O Button
15- Power Button
16- Power On & Record Hotkey
17- Reset Switch & Sim Card Slot
18- InfraRed Light
19- Speaker
20- Push To Talk Button
21- Headphone Input
22- Additional Camera Input
23- Camera Lens
2.1- Power On & O the RE-ENFORCER
To Power On: Press and hold the power button (*15) for 2 seconds. Aer
you hear the sound, RE-ENFORCER goes into home screen.
To Power O: Press and hold the power button (*15) for 2 seconds and
the device will turn o.
2.1.1- “Power On and Record” Hotkey
Press and hold the Power On & Record Hotkey (*16) for 3 seconds.
RE-ENFORCER will automatically turn on and start recording.
2.4- Reset the RE-ENFORCER
If RE-ENFORCER fails to power on or o the system or doesn’t func-
tion correctly you can use the reset switch (*17) by pressing it with a
thin object such as a paper clip to reset the RE-ENFORCER. Please be
cautious and use rigid objects, material broken in the reset switch opening
can jam the button access.
2.5- Video Recording
Aer the system start-up, on the home screen press the Power On &
Record Hotkey (*16) to start recording. You will see the record (cam-
era) icon on the LCD screen turn red and hear a brief sound. Also, LED
indicator on the front side will ash green while recording. e data will
be saved to the internal memory as .MOV les. To stop recording press
the Power On & Record Hotkey (*16) again for 3 seconds. Recording
will stop along with a brief sound.
2.6 Voice Recording
On the home screen, press the Audio Record (*7) Button to start voice
recording. You will hear a brief sound when RE-ENFORCER starts
recording audio. To stop recording, press the Audio Record (*7) Button
again and you will hear another brief sound which indicates the voice
recording has stopped. Your audio les will be saved as .WAV les.
2.7 Photo Capturing
On the home screen, press the Photo Capture Button (*8) to switch the
RE-ENFORCER to photo mode and take pictures. Device will automati-
cally switch back to video mode aer the picture is captured.
You will hear the shutter sound indicating that you just took a picture.
You can repeat the steps to take another picture. Your pictures will be
saved as .JPG les.
2.8 InfraRed Light Settings
You can record videos where there are no external light is available,
with the InfraRed function.
Turn on & o the InfraRed function: on the home screen, press the
InfraRed Light On-O Button (*14) for 1.5 seconds. is process will
turn on & o the InfraRed light and the RE-ENFORCER will automat-
ically activate & deactivate the InfraRed Filter. IR symbol on top of the
screen will turn green from white when the InfraRed function is acti-
vated and it will turn back to white when de-activated.
Important: InfraRed Light On-O Button will be disabled unless the
“InfraRed CUT” setting in the menu is set to manual.
2.9 Microphone Settings
While Recording video, press the Audio Record Button (*7) to turn the
microphone on & o. Microphone icon on the screen will appear with
a red line on it to indicate audio recording has stopped. Red line will
disappear when the audio recording is back on.
2.10
LCD Display Settings
you can press the up button (*2) to turn on & o the LCD screen while
recording or in stand by mode.
2.11- S.O.S. Button Functions (Car Kit Support)
Press and hold the S.O.S. Button (*13) for 2 seconds. RE-ENFORCER
will automatically send a signal to the Multipurpose dock to activate
the SOS output wire. is is a 12V DC output that can be used to trig-
ger the emergency feature on the radio or any other user dened input.
2.12- Playback
Recorded videos can be seen as thumbnails by pressing the menu
button (*1) on the home screen. You can choose the videos to play
by clicking the OK button (*4). On the media gallery, up and down
buttons (*2,3) will categorize the items in your device by type. While
watching a video, up and down buttons (*2,3) will change the video
speed to fast-forward & slow-motion.
2.13 Push To Talk Function For Two Way Radio
If the RE-ENFORCER is connected to a two way radio, it can be used
as a Push To Talk device. You can use this function by pressing the
Push To Talk button (*20).
2.14 Additional Camera
Additional camera is supported by RE-ENFORCER. You can simply
plug in your additional camera to AV port to record from the addition-
al camera.
Using an additional camera will disable the RE-ENFORCER main cam-
era. To enable it back, RE-ENFORCER should be restarted aer remov-
ing the additional device.
2.15- Menu Settings
On the home screen, press the Menu button (*1) twice to access the
RE-ENFORCER menu.
Pressing the menu button once will take you to the media gallery. Pressing
it again will take you to the main menu. Pressing once more will take you
back to the home screen.
Important: e default password to change the settings is: 000000
Otros manuales para re-enforcer
1
Tabla de contenidos
