Panini mI:Deal Manual de usuario
Last Updated 1/23/19 1
Panini mI:Deal Installation
This guide will assist you to install your Panini mI:Deal scanner. There are
instructions for a Windows computer and instructions for a Mac computer. Navigate
to the appropriate page for the installation. If you need assistance, please contact
Treasury Management Support at 1-877-236-2739 or
tmsupport@johnsonfinancialgroup.com.
WINDOWS OPERATING SYSTEMS...................................................................................................... 2
MAC OPERATING SYSTEMS............................................................................................................... 5
Last Updated 1/23/19 2
WINDOWS OPERATING SYSTEMS
INST ALL ATI ON
***Administrative rights should be granted in order to complete the installation***
1. Please review the necessary system requirements for DepositPartner to run
properly.
2. Connect the scanner.
a. Connect the USB cable to the back of the scanner, then to the computer.
b. Connect the scanner power cable to the back of the scanner, then to an
available power outlet.
c. Make sure the blue flaps of the scanner are open and the light is a solid
orange.
3. Visit files.panini.com and use the credentials below to download the Panini mI:Deal
Setup.exe.
PASSWORD: P@ssw0rd
4. Double-click the Panini mI:Deal Setup.exe to start the installation.
5. Click Save and Run. Then Click Next.
6. Click Finish to finalize the Panini mI:Deal setup process.
7. Open a web browser (ie. Safari or Google Chrome) and navigate to
https://192.168.4.1 or http://192.168.4.1. The Panini homepage should open. If the
homepage does not open, contact Treasury Management Support at 1-877-236-
2739.
Last Updated 1/23/19 4
c. Click Next.
d. Scroll to the bottom of the page.
e. Next to HTTPS: select Default Certificate.
f. Click Set Configuration.
10. Reboot the scanner by clicking the Reboot button. Leave the scanner plugged in.
a. The scanner light will flash from orange to red a number of times. Once the
light has stopped flashing, close the browser. You are finished with this page.
11. You can now begin submitting deposits via the DepositPartner website.
12. Registering your scanner
a. After logging into DepositPartner, click the Registration Tab on the top
menu bar.
b. Click on Re-Register.
c. Select the Panini mI:Deal scanner and enter the Host Name as 192.168.4.1.
d. Click Register.
13. You can now scan and deposit checks.
For assistance, please contact Treasury Management Support at 1-877-236-2739 or email to
tmsupport@johnsonfinancialgroup.com.
Last Updated 1/23/19 5
MAC OPERATING SYSTEMS
INST ALL ATI ON
***Administrative rights should be granted in order to complete the installation***
1. Connect the scanner.
a. Connect the USB cable to the back of the scanner, then to the computer.
b. Connect the scanner power cable to the back of the scanner, then to an
available power outlet.
c. Make sure the blue flaps of the scanner are open and the light is a solid
orange.
2. Open a web browser (ie. Safari or Google Chrome) and navigate to
https://192.168.4.1 or http://192.168.4.1. The Panini homepage should open. If the
homepage does not open, contact Treasury Management Support at 1-877-236-
2739.
a. If using Firefox, a warning message may appear.
i. Click on Advanced and Add Exception…
ii. Click Get Certificate.
Last Updated 1/23/19 6
b. If using Chrome, a warning message may appear.
i. Click on Advanced and Proceed to 192.168.4.1 (unsafe).
3. The Panini Homepage should appear.
Last Updated 1/23/19 7
4. Click Configuration.
a. Click Connection Parameters Setup.
b. Click Next.
c. Scroll to the bottom of the page.
d. Next to HTTPS: select Default Certificate.
5. Download Root Certificate
a. Note: You must have Administrative rights in order to download the certificate.
Last Updated 1/23/19 8
b. Click on the Root CA Certificate (PEM Format) link.
c. After the Certificate has been downloaded, click Set Configuration.
6. Reboot the scanner by clicking the Reboot button. Leave the scanner plugged in.
a. The scanner light will flash from orange to red a number of times. Once the
light has stopped flashing, close the browser. You are finished with this page.
7. Keychain Access
a. Click Go in the menu bar at the top of the screen. Select Utilities from the
dropdown.
b. Click on Keychain Access.
Last Updated 1/23/19 9
c. Click on Certificates.
d. Right click on the certificate and click Get Info:
e. Expand Trust, then in the first dropdown, choose Always Trust.
Last Updated 1/23/19 10
f. Click the red dot to close the window. You will be prompted for a username
and password for the computer. Enter credentials and select Update Settings.
8. Register Your Scanner
a. Navigate to the DepositPartner website and log in.
i. Note: You will be prompted to set up Multifactor Authentication. If
you need assistance please visit the Client Resource Center and view
the DepositPartner Multi-Factor Authentication Web Application
guide.
b. Click Registration in the top menu bar.
c. Choose the Location and Scanner: Panini mI:Deal.
d. Enter the Host Name as 192.168.4.1 then click Register.
9. You should be able to scan and complete a deposit.
For assistance, please contact Treasury Management Support at 1-877-236-2739 or email to
tmsupport@johnsonfinancialgroup.com.
Tabla de contenidos
Otros manuales de Escáner de Panini
Panini
Panini I:Deal Manual de usuario
Panini
Panini My Vision X Manual de usuario
Panini
Panini Vision 1 Manual de usuario
Panini
Panini Vision X Manual de usuario
Panini
Panini My Vision X Manual de usuario
Panini
Panini Vision NeXt Manual de usuario
Panini
Panini EverneXt Manual de usuario
Panini
Panini My Vision X Manual
Panini
Panini My Vision X Manual de usuario
