Panduit GP6 Plus Manual de usuario

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

Page 2 of 3

4. Install jumper troughs between bases with two #12 sheet

metal screws (supplied).

GP6 PLUS Standard Density Tower Kit

Part Number: GPKT724Y

1. Mount tower to wall using #12 wood screws (not provided) or

equivalent. Some applications will require different mounting

hardware. Ensure that the bottom of the tower is at least 8" from

the floor to provide space for horizontal cable manager trough.

2. Route cable bundle into tower and fan out individual cables

into their appropriate positions through the cutouts provided

along the tower leaving 12" to 18" of slack. Each cutout

accommodates up to 6, 4 pair cables. Use cable ties to secure

bundle to raised tabs on back of tower.

3. Position base over slots in tower and secure with two #12

sheet metal screws (supplied). Place conductors into index

strip and install connecting blocks as per instruction sheet

PN153* (provided).

SCREW HERE

CABLE REQUIREMENT: Terminates most 22-26 AWG solid or stranded

IWC wire with a 0.050" (1.27mm) max. o.d., either PVC or Plenum rated.

* Denotes instruction sheet revision letter.

E-mail:

[email protected]m

Phone:

866-405-6654

For Instructions in Local Languages

and Technical Support:

www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

www.panduit.com

Page 3 of 3

5. To help contain cross-connections, install vertical cable managers (P110VCM300) adjacent to towers using #12 wood screws

(not provided) or equivalent.

Attach horizontal cable manager trough to towers and vertical cable managers using #12 sheet metal screws and #12 external tooth

lock washers (provided). Fasten securely to assure grounding. Attach ground lug (P/N:LAM2A2/0-14-6) with 1/4" x 3/4" machine screw,

nut, and 1/4" external tooth lock washer (provided), to the bottom of the horizontal cable manager trough.

Component Quantity per Tower System

Base Trough Connecting Blocks Label Holders Labels

Part Number

GPKT724Y 3

GPB24

P110JT

GPCB4

P110LH

DSLGP

CABLE REQUIREMENT: Terminates most 22-26 AWG solid or stranded

IWC wire with a 0.050" (1.27mm) max. o.d., either PVC or Plenum rated.

INSTALLATION TIPS:

1. GP6 PLUS product terminates most 22-26 AWG solid or stranded IWC wire with a 0.050” (1.27mm) max. o.d., either PVC or Plenum rated.

2. Never install wire into a slot previously used for a larger gauge.

3. Be careful to strip back cable jacket only as required for termination.

4. Use care to maintain pair twists up to the termination strip.

5. When stripping cable jacket, be careful not to cut the insulation on the individual wires.

6. Avoid sharp bends when routing cable.

As with all Wiring Accessories, the following statements apply:

1. Never install communications wiring during a lightning storm.

2. Never install communications wiring in wet locations unless the product is specifically designed for use in wet locations.

3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface.

4. Use caution when installing or modifying communication wiring.

Tabla de contenidos

Otros manuales de Hardware de red de Panduit

Panduit

Panduit PVQ-FMTMTP-9 Manual de usuario

Panduit

Panduit SmartZone Manual de uso y cuidado

Panduit

Panduit PANVIEW iQ PVQ-MIQPS96F Manual de usuario

Panduit

Panduit NetKey NK366M**Y Manual de usuario

Panduit

Panduit Atlona AT-HDR-EX-100CEA-RX Manual de usuario

Panduit

Panduit Atlona AT-HDR-EX-70C-RX Manual de usuario

Panduit

Panduit SmartZone PVIQ Series Manual de uso y cuidado

Panduit

Panduit M1 Manual de usuario

Panduit

Panduit SmartZone PViQ Manual de uso y cuidado

Panduit

Panduit DPOE24U1XG Manual de usuario

Panduit

Panduit CDPP8RG-S Manual de usuario

Panduit

Panduit smartzone G5 Manual de usuario

Panduit

Panduit PVMAPU24 Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario