Panasonic TY-CC20W Manual de usuario
Operating Instructions
Communication Camera
Model No. TY-CC20W
繁體中文
TIẾNG VIỆT
DANSK
NEDERLANDS
FRANÇAIS
DEUTSCH
ITALIANO
ҚАЗАҚ
PORTUGUÊS
РУССКИЙ
ESPAÑOL
SVENSKA
УКРАЇНСЬКА
GUARANTEE
ГАРАНТИЙНЫЙ ТАЛОН
TÜRKÇE
ENGLISH
日本語
TQZJ402-2
TY-CC20W.indb 1TY-CC20W.indb 1 3/19/2012 5:26:37 PM3/19/2012 5:26:37 PM
2
ENGLISH
Thank you for purchasing a Panasonic
product.
Before operating this product, please read the instructions
carefully, and save this manual for future use.
Before using this product, be sure to read “Safety Precautions”
and “Handling Precautions” ( pages 2 - 3).
This product is used to make video calls and audio
calls via the Internet through a Panasonic high-
definition television that is equipped with USB
ports*.
The television needs to be connected to the Internet
using a broadband connection.
* Some television models does not support this
product. For details on the television models that
support this product, see the Panasonic web site.
http://panasonic.jp/support/global/cs/tv/compatibility/
usb/index.html
Safety Precautions
Warning
Disassembly
Do not disassemble or modify this camera.
Doing so may cause fire or electric shock.
Caution
Drop Prevention
Make sure that the camera is installed securely.
The camera may cause injury if it falls from its installation location.
Do not wet
Always keep the camera in a cool, dry place.
Failure to do so may cause fire or electric shock.
TY-CC20W.indb 2TY-CC20W.indb 2 3/19/2012 5:26:38 PM3/19/2012 5:26:38 PM
3
ENGLISH
Handling Precautions
Do not touch the camera lens section with your hand.
Doing so may cause the lens to become dirty, which may cause the
image to become blurred.
Do not unplug the USB cable during use.
Doing so may cause the camera or television to stop working correctly.
In this case, unplug and plug the mains lead of the television from the
mains socket once, then reconnect the camera USB cable, and switch
the television power on again.
Do not pull the USB cable excessively.
Doing so may damage the camera.
Do not drop, strike, or shake the camera.
Doing so may damage the camera.
Do not store or use this camera in high temperature areas
or near strong magnetic fields.
Doing so may cause damage, deformation, or malfunctions of the
camera.
Do not use this camera in dusty, steamy, or smokey
locations, or where it may be splashed with water or
liquids.
Doing so may damage the camera.
Do not bend the stand section.
Doing so may damage the camera.
TY-CC20W.indb 3TY-CC20W.indb 3 3/19/2012 5:26:38 PM3/19/2012 5:26:38 PM
4
ENGLISH
FCC STATEMENT
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Consult the Panasonic Service Center or an experienced
radio/TV technician for help.
FCC Caution:
To assure continued compliance, follow the attached
installation instructions and use only shielded USB interface
cable when connecting to computer or TV. Any changes or
modifications not expressly approved by Panasonic Corp. of
North America could void the user’s authority to operate this
device.
FCC Declaration of Conformity
Models: TY-CC20W
Responsible Party:Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Contact Source: Panasonic Consumer Marketing Company
of North America
1-877-95-VIERA (958-4372)
email: [email protected]
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
CANADIAN NOTICE:
For Model TY-CC20W
This Class B digital apparatus complies with Canadian
ICES-003.
TY-CC20W.indb 4TY-CC20W.indb 4 3/19/2012 5:26:38 PM3/19/2012 5:26:38 PM
5
ENGLISH
Installation
Names and Functions of Parts
Magnet
Microphones
Tally Lamp
Lights red while the camera or microphone is active.
Camera Lens
Microphones
Stand
Camera Front View
USB Cable
Approx. 1.5 m (Approx. 4'11")
Stand Magnet
Camera Side View
When installing the camera onto
the television
Attach magnets on the camera stand to the top of the rear of the TV.
If the rear of the TV doesn’t made from metal, please post the camera
stand with adhesive tapes.
Top of Display Panel
Cable
holder
(Example installation at centre of display panel)
TY-CC20W.indb 5TY-CC20W.indb 5 3/19/2012 5:26:39 PM3/19/2012 5:26:39 PM
6
ENGLISH
When placing the camera on a
table surface etc.
Place the camera on a flat surface in front of the television, at
approximately face height.
NOTE
• If the camera is placed near to the television speakers, a high-pitched
noise known as “howling” may occur depending on the volume of
the television. If howling occurs, lower the volume of the television
speakers.
Connection
Connect the USB cable of the camera to the USB port on the
television.
1. Press the power button on the television to switch the
television power off.
2. Insert the USB cable of the camera into the USB port on the
television.
To USB port *1
USB Cable
*1 For details of the connection to the USB port, see the
television operating instructions.
Make sure the USB connector is facing the same direction as
the USB port.
3. Press the power button on the television to switch the
television power on.
NOTE
• Always use the button on the television to switch the power ON and OFF.
• Do not use a USB hub to connect to the television. Always connect the
camera USB connector directly to the television.
• You cannot connect this camera to a computer or other make of
television for use.
Always connect this camera to a Panasonic television that is equipped
with USB ports.
TY-CC20W.indb 6TY-CC20W.indb 6 3/19/2012 5:26:40 PM3/19/2012 5:26:40 PM
7
ENGLISH
Using the Camera
The television needs to be connected to the Internet using a
broadband connection.
Perform the following operations using the television remote
control. For more details on operations using the television
remote control, see the television operating instructions.
1. Display the “VIERA Connect” on the television screen.
2. Select the content you want to use with the camera (eg:
“SkypeTM” etc.), and press “OK”.
For the following procedures, follow the on-screen instructions
to register an account, send and receive video and audio calls,
and adjust the camera etc.
No emergency calls with Skype.
Skype is not a replacement for your ordinary
telephone and cannot be used for emergency calling.
NOTE
• Provided contents, procedures or screen displays are subject to change
without notice.
Maintenance
Clean the camera using a soft,
dry cloth.
Wiping the camera with a dusty cloth may scratch the camera.
Therefore, always shake off any dust and dirt etc. from the cloth before
cleaning.
Do not use benzine, thinners, or wax etc. on the camera, as doing so
may cause the paint to peel off.
TY-CC20W.indb 7TY-CC20W.indb 7 3/19/2012 5:26:40 PM3/19/2012 5:26:40 PM
8
ENGLISH
Specifications
Power Supply DC 5 V (USB powered) 500 mA
Power consumption Max. 0.5 W
Dimensions
Width 180 mm (7.09”)
Height 47 mm (1.86”)
Depth 28 mm (1.11”)
Mass Approx. 100 g (Approx. 0.22 lbs.)
(including USB cable)
Operating
Temperature Range 0 °C - 40 °C (32 °F - 104 °F)
Lens F/2.0 4P Lens; FOV (D) 56.8° (in HD
mode)
Microphone 4 unidirectional microphones
Sensor 1/4 inch CMOS Sensor
Resolution 1280 × 720
Focus Fixed focus (Apprex. 60 cm - )
Output Image Max. 1280 × 720 (HD)
Output Format H.264, YUV
Max. Frame Rate 30 fps
Interface USB 2.0
TY-CC20W.indb 8TY-CC20W.indb 8 3/19/2012 5:26:41 PM3/19/2012 5:26:41 PM
9
ENGLISH
Troubleshooting/Q&A
Check the followings first. If they do not solve the problem,
please contact the place of purchase.
The camera does not operate.
・Is the USB cable of the camera connected
correctly to the USB port on the television?
( page 6)
Press the button on the television to switch the
television power off, connect the USB cable of the
camera again.
・Did you start a service (such as Skype) that uses
the communication camera? ( page 7)
When a service that supports the communication
service is started and operated correctly, the camera
operates automatically.
・Does your television model support the camera?
( page 2)
The images shot with the camera are dark or
grainy.
・There is probably not enough light.
When using the camera, make the room bright.
The images shot with the camera are blurred.
・The camera is probably too close.
Use while at least 60 cm away from the camera.
If the distance is less, the image may be blurred.
TY-CC20W.indb 9TY-CC20W.indb 9 3/19/2012 5:26:41 PM3/19/2012 5:26:41 PM
10
ENGLISH
The image received from the other person
looks like it has stopped.
・Depending on the Internet connection
environment, it may not be possible to obtain a
communication speed appropriate for using the
camera.
Enhance the connection environment, or try changing
the time of day that you use the camera.
TY-CC20W.indb 10TY-CC20W.indb 10 3/19/2012 5:26:41 PM3/19/2012 5:26:41 PM
Otros manuales para TY-CC20W
1
Tabla de contenidos
Otros manuales de Cámara web de Panasonic
