Panasonic NV-HS860EG-K Manual de usuario

ORDERNO. VRD0008024C2

VideoCassette Recorder

NV-HS860EG-K/ NV-HS860EG-S / NV-HS860B-S / NV-

HS860EC-S / NV-HS960EG-S / NV-HS960B-S / NV-HS960EC-S

Z-MECHANISM

SPECIFICATIONS

Unauthorizedcopying and distribution isaviolation oflaw.

1. INTRODUCTION

This service manual contains technical information whichwill allowservice personnel to

understand and service this model.

Ifthe circuitis changedormodified, this information will be followedbysupplementaryservice

manual to be filedwith original service manual.

Note:

1. Adjustmentprocedures, DisassemblyProcedures and Assembly

Procedures for MechanismChassisareseparate volumefrom this

service manual. / Please refertotheservice manual for Z-

MechanismChassis. (OrderNo. VRD9802005C2)

2. TheModel No. isindicatedon theSchematicDiagramand Circuit

Board Diagramsas follows.

Model No. Indication Mark

NV-HS860EG-K/EG-S (A)

NV-HS860B-S (B)

NV-HS860EC-S (C)

NV-HS960EG-S (D)

NV-HS960B-S (E)

NV-HS960EC-S (F)

2. GERALDESCRIPTIONS

2.1. SERVICE CAUTION-1

-REPLACINGIC7701, IC7703 and/orB7701-

Whenthe OSD-MicroprocessorIC7701, S-RAMIC7703 and/orBack-up batteryB7701 are

replaced, the Tape Librarydata will not be available.Therefore, back up the Tape Librarydata

first, thenperformnecessaryservicing.

NOTE:

*TheTapeLibrarysystemisachievedusing notonlythedata of

whichisrecordedon thetapebutalsothedata isstoredinS-RAM

IC7703.*Thestoreddata inS-RAMIC7703 isbackedup byusing the

powersource of:

*ACConnected:ACPowersouse

*ACDisconnected:Back-up Battery(B7701).

(NOTE:EveniftheOSDPACK C.B.A.(VEP07A30A/B) is

disconnectedfrom theVCR, thepowerisstill suppliedfrom Back-

up battery.)

2.1.1. REPLACINGPROCEDURE

2.1.1.1. PREPARATION

NOTE:

Itisnecessarythat theTapeLibrarySystemhas tooperate properly.

STEP1.BACK UPTHETAPE LIBRARYDATA

1. Connect aTV and aRFAerial leadtotheVCR and receiveoneof

TV station.

2. Record theTV programmefor at least 15 minuets intheSP or LP

mode(25 minuets intheEP mode) on aCassette Tape.

2.1.1.2. REPLACEMENT

STEP2.REPLACETHEIC7701, IC7703 AND/OR B7701

1. Disconnect theACplug.

2. RemovetheC.B.A. withMechanismunitbyreferring the

Disassemblyprocedure.

3. Replace theIC7701, IC7703 and/or B7701.

STEP3.RESTORETHETAPE LIBRARYDATA

1. Using theRemote controller:

A. Press theMENU button and thentheCursor buttonstoselect

"TapeLibrary".

B. Select "Restoredata"and Press theOKbutton.

2. InserttheBacked-up cassette tapeintotheVCR. / Therestoration

ofLibrarydata starts automatically. / (Ittakes sometimetobe

completed.)

3. StoretheTapeLibrarydata accordingly.

2.2. SERVICE CAUTION-2

-REPLACINGIC6701-

Whenthe EEPROMIC6701 is replaced, propermodel code, option code and electrical

adjustment data will not be available. Therefore, enterthe necessarydata afterreplacing IC6701.

2.2.1. REPLACINGPROCEDURE

STEP1.REPLACEMENT

1. Disconnect theACplug and replace theIC6701.

STEP2.INPUTTHEMODEL& OPTION CODE

1. Set up themodel codeand option codebyordering thefollowing

table.

PROCEDURE F.I.P. DISPLAY

Turnon the Service Mode

-"Turnthe ShuttleRing to FF"*1and press

theEJECTkeysimultaneouslyformorethan

3seconds.

Activate the Service Mode 2

-"Turnthe ShuttleRing to FF"*1and press

theEJECTkeyintwice.

Activate the Entering Mode.

-Press the EJECTkeyinmorethan 3

seconds.

Setthe Mode 2.

-Press the CH UPkeyintwice.

Displaythe Setting Code.

-Press the POWER Button. / (POWER ON)

(Colon Starts

Flashing)

Enterthe Model and Option Code.

-Set the Model and Option codebyusing REW, PLAY, STOPand FF

keyson the RemoteController. (See Fig.S1 Service Screen (Sample) &

S2)

Exitfrom Service Mode.

-Press the POWER Button. / (POWER OFF)

-Press FF and EJECTkeyssimultaneouslyin

6times.

(Normal

Indication)

*1:NV-HS960 series only. As forNV-HS860 series, press the FF keyinsteadof "turning the Jog

dial."

Fig.S1 Service Screen(Sample)

Model No. Model

Code Option

Code 1 Option

Code 2 Option

Code 3

NV-HS860EG 192 08 117 47

NV-HS860EC 196 08 117 47

NV-HS860B 200 32 116 47

NV-HS960EG 193 08 117 63

NV-HS960EC 197 08 117 63

NV-HS960B 201 32 116 63

Fig.S2 Model Code & Option Code

NOTE:

Since all electrical adjustments data isstill notavailable, perform

theElectrical Adjustmentcontinuously.

-Turn on theService Modeby:/ (NV-HS960 series) / Rotating the

ShuttleRing toFF sideand press theEJECTkeysimultaneously

for 3seconds. / (NV-HS860 series) / Pressing theFF and the

EJECTkeysimultaneouslyfor 3seconds. / Thenselect theService

Mode7byrepeating aboveoperation in7times.

2.2.2. CHECKINGOFMAINC.B.A.

Whenservicing the MAIN C.B.A., take out the MAIN C.B.A. and mechanismfrom the frame and

turnover.

And thenconnectthe Extension Cable (VFK2744)betweenthe POWER C.B.A. connector

(P1102)and the MAIN C.B.A. connector(P1001)as shownin Fig. S3.

Fig. S3

2.2.3. SERVICINGTHEPACK C.B.A.

Whenservicing the OSD Pack C.B.A. and Input/Output Pack C.B.A. and TBC Pack C.B.A. and

FSC Pack C.B.A., connections of extension cable are necessaryas shownbelow.

PartNo. PartName Pcs. Connection

VFK1567 15PEXTENSION

CABLE 4PP7703 (MAIN C.B.A.)-PS7703 (OSD Pack C.B.A.)

PP7702 (MAIN C.B.A.)-PS7702 (OSD Pack C.B.A.)

PP7701 (MAIN C.B.A.)-PS7701 (OSD Pack C.B.A.)

PP3904 (MAIN C.B.A.)-PS3904 (Input/Output Pack

C.B.A.)

VFK1568 13PEXTENSION

CABLE 1PP3905 (MAIN C.B.A.)-PS3905 (Input/Output Pack

C.B.A.)

VFK1555 8PEXTENSION CABLE 1 PP3903 (MAIN C.B.A.)-PS3903 (Input/Output Pack

C.B.A.)

VFK1564 10PEXTENSION

CABLE 1PP3902 (MAIN C.B.A.)-PS3902 (Input/Output Pack

C.B.A.)

VFK1569 5PEXTENSION CABLE 1 PP3901 (MAIN C.B.A.)-PS3901 (Input/Output Pack

C.B.A.)

VFK1635 3PEXTENSION CABLE 2 PP3751 (TBC Pack C.B.A.)-PS3751 (FSC Pack C.B.A.)

PP3502 (MAIN C.B.A.)-PS3502 (TBC Pack C.B.A.)

VFK1634 7PEXTENSION CABLE 2 PP3501 (MAIN C.B.A.)-PS3501 (TBC Pack C.B.A.)

PP3503 (MAIN C.B.A.)-PS3503 (TBC Pack C.B.A.)

Fig. S4

2.2.4. CYLINDERUNIT REPLACEMENT

1. CYLINDERUINTREPLACEMENT

A. Removethe3Screws(A)oftheCLINDERUNITwitha

magnetizedscrewdriver. Fig. S5

2. UPPERCYLINDERDISASSEMBLY

A. RemovetheTop Panel.

B. Removethescrew(A)and EarthPlate.

C. Movethelock pinchtotheleft sideinordertorelease the

cylinderlock.

D. Keepturning theUppercylinderclockwise and /

counterclockwise alternatelyand removetheUppercylinder.

Fig. S6

3. UPPERCYLINDERASSEMBLY

A. WhenmounttheUppercylinder, thelock ofithas tobe

released.

Keepturning Uppercylinderclockwise and / counterclockwise

alternatelyand keeppressing ituntil itismountedcompletely.

B. Movethelock pinchtorightsideinordertofixtheUpper

cylinderaftertheUppercylinderhas beenmounted.

Fig. S7

2.2.5. FLAT CARD CABLEINSTALLATION

Wheninstalling the FlatCardCable on the connector, install the FlatCardCable with the cable

contacts facing the connectorcontacts.

Fig. S8

2.3. REMOVALOFCASSETTE TAPE

There are 2 ways to remove a cassette tape.

1. Service Information DisplayOperation

A. Turn theShuttleRing toFF and Press EJECTkey

simultaneouslyfor 3secondsand set theService Mode7.

B. Press STOP keyinordertorotate theLoading Motor for

unloading operation. (Payanattention oftapeslack)

2. Manual Operation

A. Disconnect theACMainsLeadand removetheTop Panel.

B. Rotate theMainCamGearclockwise until theLoading Posts

movetofullyunloadedposition as shownin Fig. S9. (Tapeis

remaining)

Fig. S9

C. Rotate theCapstanMotor clockwise from thebottom sideto

take up thetape. Fig. S10

D. Rotate theMainCamGearclockwise until thecassette tapeis

ejected.

2.4. INTRODUCTIONOFVIDEO HEADCLEANING CASSETTE /

(POLISHING TYPE)

1. Wearepleasedtointroduce PanasonicVideoHeadCleaning

Cassette, VFK0923FT[for service purposes] and VFK0923FSE [for

end users] for all VHS/SVHS VCP and VCR.

2. These cleaning cassettes areexclusiveremoving thehard and

stickyclogging on videoheads.

3. These improvetheefficiencyofvideoheadcleaning service and

shortening cleaning timefor end users.

Otros manuales para NV-HS860EG-K

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de VCR de Panasonic

Panasonic

Panasonic NV-H65 Series Manual de usuario

Panasonic

Panasonic AJ-D230P Manual de usuario

Panasonic

Panasonic NV-F70EA Manual de usuario

Panasonic

Panasonic OmniVision PV-Q920 Manual de usuario

Panasonic

Panasonic PV-V4525S Manual de usuario

Panasonic

Panasonic PV-V4524SK Manual de usuario

Panasonic

Panasonic NV-MV20GC Manual de usuario

Panasonic

Panasonic NV-FJ630AM Manual de usuario

Panasonic

Panasonic NV-SD20 Series Manual de usuario

Panasonic

Panasonic Omnivision PV-V4640 Manual de usuario

Panasonic

Panasonic NV-SD260 Manual de usuario

Panasonic

Panasonic DVCPRO AJ-D640P Manual de usuario

Panasonic

Panasonic NV-HD620 Series Manual de usuario

Panasonic

Panasonic PV-945H Manual de usuario

Panasonic

Panasonic AJ-D455 Manual de usuario

Panasonic

Panasonic Omnivision PV-7661 Manual de usuario

Panasonic

Panasonic NV-SJ407EE Manual de usuario

Panasonic

Panasonic PV-8660 Manual de usuario

Panasonic

Panasonic Omnivision PV-9455S Manual de usuario

Panasonic

Panasonic Omnivision PV-8455S Manual de usuario

Panasonic

Panasonic NV-F70EA Manual de usuario

Panasonic

Panasonic Omnivision PV-840F Manual de usuario

Panasonic

Panasonic NV-MV21GN Manual de usuario

Panasonic

Panasonic PV-C2023A Manual de usuario

Manuales populares de Sistema de VCR de otras marcas

Toshiba

Toshiba M-662 Manual de usuario

Sony

Sony GV-500 Primary Manual de usuario

JVC

JVC HR-J282EU Manual de usuario

Sony

Sony HDCAM-SR SRW5800 Manual de usuario

Magnavox

Magnavox VRU242AT Manual de usuario

Sony

Sony HVR-M10C Manual de usuario

RCA

RCA VR634HF - Hi-Fi VCR Manual de usuario

JVC

JVC HR-5910U Manual de usuario

JVC

JVC HR-S8600EU Manual de usuario

JVC

JVC HR-FS1U Manual de usuario

Sharp

Sharp VC-H9888U Manual de usuario

FUNAI

FUNAI LC-950 Manual de usuario

Sharp

Sharp VC-S2000GM Manual de usuario

Sony

Sony Video8 EV-A60 Manual de usuario

Aiwa

Aiwa HV-E212 Manual de usuario

JVC

JVC HR-J3006UM Manual de usuario

GE VG4271 Manual de usuario

RCA

RCA VR678HF Manual de usuario