Panasonic AJ-HD3700H Manual del propietario

Digital Video Cassette Recorder

Operating Instructions

(Supplement 1)

AJ- E

– 2 –

Outline of changes and additions

This supplement describes what changes and additions have been made to the operating instructions of the

AJ-HD3700H digital video cassette recorder.

New changes and additions

Item concerned

Recording

HOME

VIDEO IN

TC/CHR

CONVERT

SYSTEM SET UP

TEST IC CARD

ERROR LOG

Change/addition

System frequency added

Internal signal generator (INT-SG)

synchronization

TC conversion function

Menu changed

True-P (Non-PsF) signal interface added

Date and time registration method

F7 (REAL TIME) key added

Page in AJ-HD3700H’s

operating instructions

Hardware section,

page 25

Software section,

page 8

Software section,

pages 22, 23

Software section,

pages 70 to 73

Software section,

page 80

Software section,

pages 130 to 132 and

135

Software section,

page 156

Software section,

page 161

Page in this

supplement

3, 4

6, 7

8 to 11

12, 13

14 to 17

18, 19

– 3 –

Recording

This flowchart shows the steps for recording the digital signals which are supplied to the unit from an external

digital device.

11. Check the connections.

12. Turn on the power.

13. After making sure that no cassette tape is inserted in this unit, set the system frequency

59.94, 23.98, 24, 25 or 50 by F1 (FREQ) key of the SYSTEM SET UP menu.

How to display the ≥SYSTEM SET UP menu:

menus: #

°1The 1035/59.94i format signals cannot be recorded on this VTR but a tape recorded using the AJ-HD2000 or other model can

be played back.

°21080/23.98p 1080/25p and 1080/24p format tapes can be played back and 1080/50i format signals can be output automatically.

F4SET UP

F13

F12

F11

F10

F8F7F6F5F4F3F2F1

The frequency setting is possible when the two keys, F and F1 are pressed at the same time.

Select the frequency by cursor key [3, 4] and press the BS and ENT keys at the same time,

then the frequency is secured. In 59 Hz mode, the selection window will be further displayed

(1080i/525i/720p). Select the format by the cursor key, and press the BS and ENT keys at

the same time to secure the format. When the 1080i or 720p format has been selected, se-

lect its 4-channel or 8-channel audio version, and enter the format by pressing the BS and

ENT keys at the same time.

In the 23.98 Hz, 24 Hz or 25 Hz mode, a window appears offering the user the option of se-

lecting PsF or P for the VIDEO signal interface format. When the format is selected using the

cursor keys [3, 4] and the BS key and ENT key are then pressed together, the format is en-

tered. In the same way, the HD MAIN output and HD MONI output formats are selected using

the cursor keys [3, 4] and then entered by pressing the BS key and ENT key together.

(The table below lists the possible combinations of the output signals of the video output

connectors. These combinations are available only when the AJ-UDC3700P option has

been installed.)

System format

1080/59.94i°1

720/59.94p

1080/23.98p

1080/24.00p

1080/25p, PsF

1080/50i°2

480/59.94i

HD MAIN

1080/59.94i

720/59.94p

1080/23.98PsF

1080/23.98p

1080/59.94i

720/59.94p

1080/24PsF

1080/24p

1080/60i

720/60p

1080/25PsF

1080/25p

1080/50i

1080/59.94i

HD MONI

1080/59.94i

720/59.94p

1080/23.98PsF

1080/59.94i

1080/23.98p

1080/59.94i

720/59.94p

1080/24PsF

1080/60i

1080/24p

1080/60i

720/60p

1080/25PsF

1080/25p

1080/50i

1080/59.94i

HDTV output

SD SDI MAIN

525/59.94i

525/59.94p

525/59.94i

525/59.94p

——

525/59.94i

525/59.94p

525/59.94i

525/59.94p

——

625/50i

525/59.94i

SD SDI MONI

525/59.94i

——

525/59.94i

——

625/50i

525/59.94i

Analog composite

NTSC

——

NTSC

——

PAL

NTSC

SDTV output

≥Output when a format converter has been installed

–4 –

Recording

≥The REF synchronization specifications applying when the 1080/23p, 24p or 25p True-P (Non-PsF) system

format is selected are the same specifications as for the PsF system format. Use an interlace format signal

for the HD tri-level SYNC signal.

≥The True-P (Non-PsF) input/output interface does not support EMBEDDED AUDIO/TC/VANC.

≥The enhance and filter response picture quality adjustments do not work for True-P (Non-PsF) outputs.

≥Other signals cannot be superimposed onto HD monitor outputs using True-P signals.

≥When PsF signals have been recorded using a PsF system format and they are subsequently played back

using a True-P system format, the PsF signals are converted into True-P signals. Conversely, when True-P

signals have been recorded using a True-P system format and they are subsequently played back using a

PsF system format, the True-P signals are converted into PsF signals.

≥Bear in mind that when recording 1080/50i signals using the 1080/25PsF system format, the signals will be

recorded but the images will be blurred.

–5 –

HOME menu displays

∑Audio signal display area (Either 8 or 4 channels will be automatically displayed depending on the

format used.)

Use this to adjust the level of the input audio signals on the AUDIO

IN menu. Alternatively, it is used to adjust the level of the audio

playback output signals on the AUDIO OUT menu.

Press the L/R buttons to select the audio channel whose signals

are to be output from the AUDIO MONITOR L/R connectors and

HEADPHONES jack.

These display the type of input signals of each channel.

The F1 (CH-1) to F6 (DIGITAL) [or F1 (CH-1) to F13 (CH-8) for 8

channels] on the AUDIO IN PCM INPUT SELECT menu are se-

lected using the F9 (CH-MIX) key on the AUDIO IN CUE INPUT

SELECT menu.

[---- ANA: Signals from the ANALOG INPUT connectors.

CH1 AES:

Signals from the DIGITAL AUDIO INPUT connectors.

CH1 SER: Signals from the serial V/A input connectors.

{---- INT: Signals from the internal signal generator.

[---- LINE: Signals from the CUE IN connector.

CUE MIX: CH1 to CH8 signals selected by CUE MIX setting.

{---- AUTO: This is always used for digital channel backup pur-

poses.

∑Display lamps

SYSTEM: This indicates the video system format which was set

on the SETUP/SYSTEM menu.

1080_59i, 525_59i, 1080_23psf, 1080_23p,

1080_24psf, 1080_24p, 720_59p, 1080_50i, 1080_25p

TAPE: This indicates the format of the playback tape.

“¢¢¢¢¢¢¢¢”appears in the EJECT mode.

If a section is unrecorded or if the format of a section

cannot be identified, the lamp blinks while the display

of the format identified up to the section concerned is

retained.

1080_59i, 1080_60i, 1035_59i, 1035_60i, 525_59i,

1080_23p, 1080_24p, 720_59p, 720_60p, 1080_50i,

1080_25p

ONoteN

A tape recorded with the system format set to 1080/23.98psf or

1080/23.98p is recorded in the same tape format, and “1080_23p”

is displayed on the front panel when it is played back. Similarly,

“1080_24p”appears on the front panel with a tape recorded using

the 1080/24psf or 1080/24p system, and “1080_25p appears

when a tape recorded using the 1080/25psf or 1080/25p system.

How to display the ≥AUDIO IN menu: ≥AUDIO IN PCM INPUT SELECT menu:

menus: #

≥AUDIO OUT menu: ≥AUDIO IN CUE INPUT SELECT menu:

# F7

AUDIO OUTAUDIO OUT

F6AUDIO INAUDIO IN

– 6 –

VIDEO IN menu

This menu is displayed by pressing the following key: VIDEO IN

F13

F12

F11

F10

F8F7F6F5F4F3F2F1

–7 –

VIDEO IN menu

Key

F3–F6

F8–F11

F12

F13

Key designation

INPUT

For selecting the HD video

input signals.

INT SG

For selecting the type of

HD internal signals.

——

SG REF

For synchronizing the

INT SG

——

INT SG

For selecting the type of

SD internal signals.

INPUT

For selecting the SD video

input signals.

Description

DIGITAL: Selects the serial input signals.

INT SG: Selects the internal signals.

75% CB: Selects the 75% color bar signal.

100% CB: Selects the 100% color bar signal.

RAMP: Selects the RAMP signal.

MULT-BST: Selects the multi-burst signal.

BLACK: Selects the black-burst signal.

SIF PLL: Selects the signals for checking the serial

interface PLL.

SIF EQ: Selects the signal for checking the serial interface

equalizer.

SMPTE CB°1:Selects the SMPTE color bar signal.

AUTO: When video input signals are present, the internal

reference signal is locked to the input signals; when

video input signals are not present, it is locked to the

signal selected by the OUT REF setting°2.

OUTPUT: The internal reference signal is locked to the

signal selected by the OUT REF setting°2.

75% CB: Selects the 75% color bar signal.

100% CB: Selects the 100% color bar signal.

RAMP: Selects the RAMP signal.

MULT-BST: Selects the multi-burst signal.

BLACK: Selects the black-burst signal.

SIF PLL: Selects the signals for checking the serial interface

PLL.

SIF EQ: Selects the signal for checking the serial interface

equalizer.

SMPTE CB: Selects the SMPTE color bar signal.

DIGITAL: Selects the serial input signals.

INT SG: Selects the internal signals.

°1When the 720/59p format has been selected, the SMPTE CB function does not function.

°2Refer to the HOME SET UP menu.

–8 –

TC/CHR menu

This menu is displayed by pressing the following key: TC/CHR

F13

F12

F11

F10

F8F7F6F5F4F3F2F1

–9 –

TC/CHR menu

Description

INT: Built-in time code generator.

EXT LTC: LTC time code from TIME CODE input connector.

S LTC: LTC time code added to serial signals; not displayed

when the SD mode is selected.

S VTC: VTC time code added to serial signals; not

displayed when the SD mode is selected.

EXT VITC: VITC time code added to video signals; not

displayed when the HD mode is selected.

≥When the F1 (SOURCE) key is at [INT], AUTO, PRESET and

SALVE are displayed.

AUTO: Generator locks at the value read out by the

reader. In this case there is no time code setting.

(Only during editing.) During normal recording,

however, any setting of the generator can be

performed.

PRESET: Generator does not lock at the value read out by

the reader. Generator can be set freely.

SLAVE: The generator is locked to the reader’s readout

value. In this case, the time code cannot be set.

≥When the F1 (SOURCE) key is at [TEXT LTC], SALVE and

DIRECT are displayed.

SLAVE: Generator locks to external LTC time code.

(When there is no external input, E-TC time data

blinks. )

DIRECT: External LTC time code is recorded as is.

(When there is no external input, E-TC: ¢¢:¢¢:

¢¢:¢¢are displayed.)

≥When the F1 key is at [S VITC], [S LTC] or [EXT VITC], this key

is not displayed.

In this case, the generator value typically locks to external VITC

or LTC time code.

ON: User bit locks to user bit value read by reader (TCR) or to

external user bit value, and cannot be set.

OFF: Generator does not lock to value read out by reader. User

bit value can be set freely.

REC RUN: Runs the TC only while recording is in progress.

FREE RUN: Runs the TC all the time in the same way as a

clock.

Valid only when the F1 (SOURCE) key selects [INT].

ON: Drop frame mode is set.

OFF: Non-drop frame mode is set.

≥When [EXT LTC], [S VITC] or [S LTC] is selected in the F1

key, the VTR conforms to drop/non-drop frame mode of

external time code.

Key

Key designation

SOURCE

For selecting

internal/external time code

signal.

TC SLAVE

For setting up time code

slave lock mode.

UB SLAVE

User bit lock.

RUN MD

Time code progress.

DF MD°

For selecting drop or

non-drop frame.

°This is not displayed when the 1080/23psf, 1080/23p, 1080/24psf, 1080/24p, 1080/25psf, 1080/25p or 1080/50i

system format has been selected.

–10 –

TC/CHR menu

Description

ON: CF BIT is recoorded.

OFF: CF BIT is not recorded.

≥When [EXT LTC], [S VITC] or [S LTC] is selected in the F1 key,

the VTR conforms to the external color frame bit.

Transfers the VTR to the TC/CHR SET UP menu screen.

Transfers the VTR to the TC/CHR CONVERT menu screen.

LTC: LTC is read out all the time.

AUTO: At low speed, VITC is read preferentially. When it is not

read, then LTC is read.

VITC: VITC is read out all the time.

≥In either setting, when the time code cannot be read, values

corrected by control signal are read out. (Interpolation mode is

assumed and [INTRP] is displayed on the HOME menu.)

TC.ST: The time code and VTR operating mode are

superimposed.

TC.ST.RT: The time code, VTR operating mode and remaining

tape time are superimposed.

TC.UB: The time code and user’s bit are superimposed.

TC.TC: The time code is displayed in two steps.

Both the original time code information and the time

code information in the format to which it has been

converted can be displayed at the same time. (Refer

to the note on the next page.)

TC: Only the time code is superimposed.

OFF: Nothing is superimposed.

ON: The warning displays are superimposed.

OFF: The warning displays are not superimposed.

REVERSE: Characters appear against a black background.

INTENSE: Characters are displayed more intensely.

Key

F10

F11

F12

F13

Key designation

CF BIT°1

For selecting the color

frame bit ON/OFF during

recording.

——

SETUP

CONVERT°2

TCR

For selecting time code

read out mode.

SUPER

For setting superimpose.

SUPER ERR

CHR TYPE

For selecting type of

character to be

superimosed.

°1This is displayed only when the 480/59.94i system format has been selected.

°2This is displayed only when the 1080/23psf, 1080/23p, 1080/24psf, 1080/24p, 1080/25psf, 1080/25p or 1080/50i

system format has been selected.

Otros manuales para AJ-HD3700H

Tabla de contenidos

Otros manuales de Sistema de VCR de Panasonic

Panasonic

Panasonic Omnivision PV-V4021 Manual de usuario

Panasonic

Panasonic NV-F55EG Manual de usuario

Panasonic

Panasonic PV-V4525S Manual de usuario

Panasonic

Panasonic NV-DV2000EC Manual de usuario

Panasonic

Panasonic AJ-D230H Manual de usuario

Panasonic

Panasonic NV-FJ600 Series Manual de usuario

Panasonic

Panasonic PV-455S-K Manual de usuario

Panasonic

Panasonic NV-HD600 Series Manual de usuario

Panasonic

Panasonic PV-V4623S Manual de usuario

Panasonic

Panasonic NV-HS880EG Manual de usuario

Panasonic

Panasonic Omnivision PV-4664 Manual de usuario

Panasonic

Panasonic AG-2580 Manual de usuario

Panasonic

Panasonic NV-FJ630PMP Manual de usuario

Panasonic

Panasonic Omnivision PV-V4530S Manual de usuario

Panasonic

Panasonic PV-C2522-K Manual de usuario

Panasonic

Panasonic AGRT650P - TIME LAPSE VTR Manual de usuario

Panasonic

Panasonic NV-HS1000 Manual de usuario

Panasonic

Panasonic VQT0C55 Manual de usuario

Panasonic

Panasonic AG-DV11DC P Manual de usuario

Panasonic

Panasonic Omnivision PV-7664 Manual de usuario

Panasonic

Panasonic PV-V4524S Manual de usuario

Panasonic

Panasonic NV-SJ220EG Manual de usuario

Panasonic

Panasonic NV-MV41GN Manual de usuario

Panasonic

Panasonic ProLine AG-1340 Manual de usuario

Manuales populares de Sistema de VCR de otras marcas

Toshiba

Toshiba M-662 Manual de usuario

Sony

Sony GV-500 Primary Manual de usuario

JVC

JVC HR-J282EU Manual de usuario

Sony

Sony HDCAM-SR SRW5800 Manual de usuario

Magnavox

Magnavox VRU242AT Manual de usuario

Sony

Sony HVR-M10C Manual de usuario

RCA

RCA VR634HF - Hi-Fi VCR Manual de usuario

JVC

JVC HR-5910U Manual de usuario

JVC

JVC HR-S8600EU Manual de usuario

JVC

JVC HR-FS1U Manual de usuario

Sharp

Sharp VC-H9888U Manual de usuario

FUNAI

FUNAI LC-950 Manual de usuario

Sharp

Sharp VC-S2000GM Manual de usuario

Sony

Sony Video8 EV-A60 Manual de usuario

Aiwa

Aiwa HV-E212 Manual de usuario

JVC

JVC HR-J3006UM Manual de usuario

GE VG4271 Manual de usuario

RCA

RCA VR678HF Manual de usuario